Search results

  1. mattmcdan

    Fox w/ Sn95 spindle

    Hey guys! I am doing a 5 lug swap on my 90 coupe. I had read that you can change the fox ball joints to SN95 ball joints when doing this swap and you don't have to use the stacked washer method. Can anyone else confirm this? I have stock K-member and stock lower control arms. Thanks, Matt
  2. mattmcdan

    iron aftermarket heads....do they exist???

    Racing Head Service (RHS) 35306-02 - RHS Pro Action Small Block Ford Cylinder Heads - Overview - SummitRacing.com
  3. mattmcdan

    Smooth engine bay, need help!

    I will throw in a 5L roller block and 8.8 rear end as a bonus to anyone that wants to complete this!
  4. mattmcdan

    Where to get adapter for manual rack

    79-93 Mustang Forged Adapter Flange
  5. mattmcdan

    Smooth engine bay, need help!

    408w, AFR 225's, Eagle rotating, PA Super comp C4.
  6. mattmcdan

    Smooth engine bay, need help!

  7. mattmcdan

    Smooth engine bay, need help!

    A little encouragement for those willing to help.
  8. mattmcdan

    Smooth engine bay, need help!

    I will buy you lunch and provide beer if you are 21+, and buy all materials needed. You will need to bring a welder. I am willing to pay for your gas/time as well.
  9. mattmcdan

    Smooth engine bay, need help!

    Smooth engine bay, need help! Updated Pics! Hey all, I haven't posted anything in a very long time. But my progress on my ol blue notch hasn't ceased. I am currently at a point on my project where I thought dang it would be nice to have a smooth engine bay. Unfortunately I do not have a...
  10. mattmcdan

    Vaccum Loss

    I have went so far as to plug off all vaccum lines except for the map sensor on firewall. It had no effect. I am hoping for someone to chime in that had a similar problem.
  11. mattmcdan

    Vaccum Loss

    Hey fellas! I have an 87' coupe DD that I bought for the cheap. It has had a serious cold start problem along with vaccum problem since I bought it. The 2.3 starts fairly easy, but immediately starts shaking badly. When you tap the accelerator it smooths right out for about 15 seconds then it...
  12. mattmcdan

    update on the Cobra

    He's probably selling it to buy a Honda civic. Sorry had to be the oddball.
  13. mattmcdan

    best place to get a 347 rotating assembly

    gofaststuff.com I have used him twice now. Once for my eagle 408w kit and also for my 496 bbc kit.
  14. mattmcdan

    Anyone have this shifter?? (pic)

    I want that shifter too!
  15. mattmcdan

    Nitrous...where to start?

    I used the Trick Flow kit made by NX on my 1990 carb'ed 5L. It was pretty easy to install. PN TFS-N4150 approx $450
  16. mattmcdan

    Anything to replace the actual ashtray with on a '87-93 besides a switch panel?!

    dude seriously, someone is going to steal that and patent it. You could probably sell a few thousand of those.
  17. mattmcdan

    Need help picking a carb!

    I used a Barry Grant Speed Demon 575cfm on my 302, it has many of the same mods you have probably with a touch more. I used to have a Holley 650 and found it to be a bit large for street driving. Also as a rule of thumb mechanical secondaries are generally used on stickshift cars or auto trans...
  18. mattmcdan

    Anything to replace the actual ashtray with on a '87-93 besides a switch panel?!

    I must have missed these cup holders that ryan made up. Anyone have a picture of this cupholder?
  19. mattmcdan

    How do I convince my wife this is a good deal?

    ROFL
  20. mattmcdan

    Fuel Cell and Trunk Mount Battery Pics WANTED!!!

    looking good, keep them coming fellas!
Top Bottom
Back
Forums
Menu