Search results

  1. Mr Plow

    anyone heard the SLP loudmouth exhaust

    My dyno run was taken with the SLP catback. Joe at Mustang Magic was pretty impressed with my numbers considering I only had pullies, filter and plenum besides catback. He said "obviously, SLP is making some good power." Do you have the stock h-pipe? Yes I also have my stock h-pipe. I...
  2. Mr Plow

    Opinions needed for tire size

    How much of a weight difference is there between the stock size tire and rim and the ones I've decided on? While I was researching tire sizes and whatnot, I found out that the 275/40 and 315/35 are exactly the same everything that the 245/45 are, pertaing to speedo and outside diameter.. thanks
  3. Mr Plow

    anyone heard the SLP loudmouth exhaust

    Cruising around town at "normal" rpm's it has a nice beefy but subtle tone. There is no interior drone. And at highway speeds in 5th, the rpm's arent that high, depending on gears you have and it almost sounds like stock - I refer to the 5th gear tone as a predator waiting in a bush, waiting...
  4. Mr Plow

    Opinions needed for tire size

    I'm looking to get a new set of rims and tires. I think I've finally decided on the 17x9 and 17x10.5 Bullit w/ deep dish rear with 275/40 and 315/35. Would this be a good combo or not. Advice and opinions greatly appreciated.
  5. Mr Plow

    Mustang GT vs WS6 Trans AM!!!!!!

    I actually ran a WS6 a few weeks back. He was stock auto. I beat him by 2 car lengths in a marked 1/4 mile run. It was video taped and hopefully will be on a future dvd.....Now go try and whoop your bosses arse
  6. Mr Plow

    Tire and rim combo

    I'm curious if anyone is running a 17 x 10.5 rim in the rear with 315/35/17 rubber and using a 17 x 8 rim in the front with 245/45/17 rubber. If so please IM me a pic or post some pics and links. Thanks everyone in advance!! :banana:
  7. Mr Plow

    keep ny dragstrip open petition..please sign

    signed number 2176 :banana:
  8. Mr Plow

    Comp Cams 102600

    i would definately pay the money to have them installed.
  9. Mr Plow

    Suspension Guru's please answer question

    The installed springs were Tokico. I was thinking that a rubber isolator was left in on the passenger rear or something. I appreciate all comments and help. I measured on level ground, and you can see how the car is on an angle, lower on the drivers side, when you look from the rear. I guess I...
  10. Mr Plow

    Suspension Guru's please answer question

    A little over a week ago I had Tockico shocks, struts and springs installed. I took at measurement today of each wheel location and here are the results: Measurement taken from bottom of rim lip to fenderwell: Driver side front: 24" Driver side rear: 24 1/2" Passenger front: 24 1/2"...
  11. Mr Plow

    steeda springs + tokico blue

    I can vouch for the tokico shocks and struts, but not the springs, because I have Tokico springs. My combo seems real tight in turns and you can notice the extra firmness..I also added a tubular front sway bar to help tighten up the front end..
  12. Mr Plow

    Looking to start doing internals -CAMS specifically

    Thanks, I'll take a look at VT Engines and see what they might have for me.
  13. Mr Plow

    Radiator fan question

    Defrost and A/C were both off. That probably explains why it takes so long to warm that thing up LOL. I guess it time to bring her in...
  14. Mr Plow

    Radiator fan question

    When I turn the key to the run position, my fan instantly turns on, and stays on all the time. Is this normal or something to bring to the dealers attention or something I can fix myself? Any help is appreciated. :hail2:
  15. Mr Plow

    Which Plenums whistle/don't whistle???

    When I put the C&L plenum on there was a whistle type noise. Now I recently added a Accufab 75mm tb and it seems the whistle is a bit louder - whistle occurs off idle when driving normal.
  16. Mr Plow

    Looking to start doing internals -CAMS specifically

    I'm looking to possibly get a set of cams for my 03 GT. Now, I have no idea what company/brand to use. My mods are listed in my sig, X-pipe and headers will be added soon...So, what is everyones advice for CAMS for my setup? I have no clue if my wife will let me get a s/c due to the price...
  17. Mr Plow

    Mach 460 CD Player SUX

    I have the 6 disc mach system. It will play burned cd's even though the manual says it won't. But there is one pain in the ass problem with those burned cd's - they dont come out when you push eject....
  18. Mr Plow

    what suspension to do you have?

    For $600 installed I got Tokico shocks, struts and springs. Big difference over stock and it now has a very nice stance. A lot stiffer than stock.
  19. Mr Plow

    long island people

    The install also came with a 12 month unlimited mileage warranty, including using the car at the drag strip.
  20. Mr Plow

    long island people

    3.73 gear install cost me $375 plus $100 for a computer calibration for my speedo. That was at mm about a month ago, and it took less than an hour to do while I waited.
Top Bottom
Back
Forums
Menu