Search results

  1. F

    Alternator???

    I have an 89 mustang with a 130a alternator off of the newer 94-95 mustangs. Now my question is can I use an after market alternator bracket for a 94-95 mustang to mount the alternator to the engine with the stock water pump? Cause I know you can use the stock bracket and tensioner but I dont...
  2. F

    Front Brakes???

    I was wondering what size rotors are on the front of the 8 cylinder fox's? Cause I got new rotors today and they are 11" rotors and my old ones are 10". So I was wondering if maybe my spindles are from a 4 cylinder fox. Also I got new pads and the holes on the outer pad don't match the holes...
  3. F

    Spark Plug wires

    WHATS THE OHMS PER FOOT ON THE FMS WIRES?
  4. F

    Timing Issue

    You check the whole valvetrain?
  5. F

    Spark Plug wires

    Does anyone know the ohms per foot for the FMS wires?
  6. F

    Spark Plug wires

    OK Im hearing a lot of mixed reviews. Im wondering, does anyone know the ohms per foot on the FMS wires?
  7. F

    Valve Body Help

    Also found this. Hughes: http://www.jegs.com/p/Hughes+Performance/760486/10002/-1/10563
  8. F

    Valve Body Help

    Check PA(performance automatic). I know PA makes a lot of stuff for C4s so I would assume that they would make some stuff for C6s as well.
  9. F

    Spark Plug wires

    I am going to be putting some new spark plug wires on my car and I wanted to see what you guys think is better. I am between 2 sets the ford racing 9mm set and the taylor thundervolt set. Here is a link to each. Ford Racing...
  10. F

    Trans Cooler

    Thanks everyone.
  11. F

    Push Rods

    I am putting pushrods in my new engine and I have to use hardened chromemoly pushrods. Now my question is I know the factory wall thickness of the pushrods is .065 correct? Now could I use .080? There wont be any problems with using a thicker wall correct? The length is still the stock 6.7...
  12. F

    Trans Cooler

    I am going to run an external trans cooler. Now I was wondering what size steel braided lines to use? And also how much line should I get? Im going to mount the cooler to the front of the radiator. Thanks, Dave
  13. F

    Injectors???

    Thanks stangnet.
  14. F

    Injectors???

    Me and my buddy are going to be building an engine for is fox. We are just doing a 302 or 306 with GT40 aluminum heads, TrickFlow stage I cam, roller rockers, intake manifold, throttle body, and full exhaust. Now my question is does he need to put different injectors in? If he does it would...
  15. F

    TPS???

    .7-1.0v at wide open throttle? Im adjusting it because it is brand new and I want to make sure it is set correctly. Thanks.
  16. F

    TPS???

    I am going to adjust my throttle position sensor. I was wondering what voltage it should be at, at closed throttle and wide open throttle? Thanks, Dave
  17. F

    Engine Balancing???

    What does subscribing mean?
  18. F

    Braking In Engine???

    It is a roller engine. Thanks guys. I think I found the perfect oil.
  19. F

    Engine Balancing???

    I have an engine balancing question. I was wondering where the external weights are supposed to be located in relation to each other. Now say an engine is balanced to a 28oz external balance. Say the 28oz weight on the harmonic balancer is at the bottom of the balancer. Now would the 28oz...
  20. F

    Braking In Engine???

    I was wondering what type of oil I should use when braking in a new engine? I have heard to use a non synthetic, but was just wondering what you guys think. I already know the whole braking in process, and just wondering about the oil. Thanks, Dave
Top Bottom
Back
Forums
Menu