Search results

  1. L

    4.10 Gears Good with 20" wheels

    Hi All I am going to swap the gears on my 07 GT/CS I just picked up. It has 20" Carrol Shelby wheels in the rear. Tires are Nitto Drag Radials 305/35/20. The car is a MT 5 spd, NA. All bolt ons I have a brand new complete kit (w bearings and all) of 3.73's here, But it looks like most...
  2. L

    Tire pressure warning light?

    AND Yes I forgot... The tire pressure was low when i brought it home 24lbs. I raised them all to 32lbs cold and reset the light but it came back on as described above. Thanx again
  3. L

    Tire pressure warning light?

    i just bought a sweet 2007 GT/CS. One of the many options added by the original owner were 20" Shelby wheels w/ 305/35/20's in the rear and 255/35/20's in the front. When I test drove this car at the dealer the TPMS light did not come on. Now after 30-40 miles the light comes on when I start...
  4. L

    Ring & Pinion Kit Part # ??

    Hi all I have a complete rebuild kit here in the garage part # 5L3Z-4209-C. I beleive it was some type of repair kit for the 8.8's. I just bought a 2007 GT/CS and was thinking of swapping the stock 3.31's I beleive w this kit and the 3.73's included. 1st ? I guess is .... Are all 8.8...
  5. L

    Support Bracket on top of rearend housing?

    I just was looking at the suspension parts available and I see that there does seem to be only 1 upper control arm. I will have to look under there and try to understand whats different from the older setup in my 1991???? Also all the Upper arms I see available seem to have bushings at the...
  6. L

    Support Bracket on top of rearend housing?

    Thanks for the response. I will have to get back under there and look at it. This is the first S197 I ever had...All my other GT's had 2 upper control arms...?? One on each side. This is similar looking but only 1 right above the center of the reareand housing. Is this something new?? Also...
  7. L

    Support Bracket on top of rearend housing?

    Hi All I just bought a 2007 GT/CS that has an incredible amount of time, $, and parts into it. I am trying to look it over so i can find all that was done to it. This one particular ? came when i was looking at the BMR Panhard setup in the rear and noticed a loud creaking sound in the...
  8. L

    FMS newer Part # gears??

    Anyone????
  9. L

    FMS newer Part # gears??

    Hi all I have a complete rebuild kit here in the garage part # 5L3Z-4209-C. I beleive it was some type of repair kit for the 8.8's. I just bought a 2007 GT/CS and was thinking of swapping the stock 3.31's I beleive w this kit and the 3.73's included. 1st ? I guess is .... Are all 8.8...
  10. L

    H/C/I whistle with Systemax intake

    Although I have not been able to drive it (streets are ****ty w/ all the bad weather we had the last few weeks); it seems to run good, I have the idle set pretty nice, I will check the TPS voltage later today. I did notice that when you tach it up to 4-5K it seems to float back down to idle, it...
  11. L

    H/C/I whistle with Systemax intake

    Hey Guys, I just put mine h/c/i combo back together, and I have a annoying whistle. It is the loudest at around 1100 rpm, if the idle drops it seems to fade away. I have TFS SH heads, AFM N41 cam, Systemax II intake, and Professional Products 70mm TB. I would like to blame the TB, BUT the...
  12. L

    Valve Cover Vent Tube

    Yes, although I am not using TFS covers (I am using Andersons polished Alum. cvrs) I called TFS and they explained what you wrote. They seemed to feel that a baffle was not necessary, but you could if you felt the need. I was gonna install the baffle from my stk covers (that I modified when I...
  13. L

    Valve Cover Vent Tube

    ttt
  14. L

    Valve Cover Vent Tube

    OK, I will leave it connected then :) I was just concerned that the new valve covers I got from Anderson did not have a baffle in them, and I did not want to be pulling oil out and into the intake??? Will it be ok connected w/ these valve covers?? Thanx
  15. L

    Valve Cover Vent Tube

    Hi All, Does anyone reccomend capping off the vent tube on the oil filler of the valve cover? I just got new valve covers and Systemax intake, and was wondering if I could cap off the vent from the Throttle body to the filler neck? Thanx:flag:
  16. L

    how are the blue oval headlights?

    THANX :flag: :flag:
  17. L

    how are the blue oval headlights?

    OK I am dumb.... :):) Who is PPI ????????????????????:flag:
  18. L

    how are the blue oval headlights?

    I am looking for a new set also. Who is PPI?? THANX
  19. L

    tfs stage 1 or 2 cam??

    I am looking at the TFS Track Heat kit w/ Stage 1 cam. I am thinking about advancing that cam also. My FMS timing set has only 3 keyways. So I am limited to 4* either way correct?? I see that 2* was mentioned..Is 4* OK also or is it too much?? Does advancing just more the curves around...
  20. L

    Keep Blowing Head Gasket, cylinder #5

    Exactly what I did not do. The machinist took .040 off, and said the intakes should be ok. BUT the lower did not sit right I take it because the rear of the lower started leaking oil pass the silicone of the rear of the lower intake. This was actually why I started this project to begin with...
Top Bottom
Back
Forums
Menu