Search results

  1. Slo5Oh89

    Convertible Top Help! ASAP!

    I was putting my top up today heard a REALLY loud pop, then a rattle while driving home. Come to find a peice snapped, not a clue what this peice is called but how do I get a replacement?? I included pictures. It appers to be a brace for the bracket the lift motor attaches to. Also anyone know...
  2. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    I cleaned the pulleys got a lot of gunk off the air pump pulley but the rest looked fine. Still have a low RPM squeal from the AC/Defroster when its on. Anyone think its becuase the belt is to long becuase I did not install the ALT Underdrive pulley? Or tensoner just cant handle it now with...
  3. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    Ok, I will try that for sure with the brake cleaner, the belt is only a couple months old. But it is the stock tensioner.
  4. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    I will check the belt being tight enough. I will also double check all the bolts on the Water Pump and Crank Pulleys. I only get a squeal with the AC at low RPM in the 1-2500 area. When the AC is on. It did have a squeal when I first turned it on but it went away thought maybe it was the...
  5. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    Ok. Anyone else have a helpful reply!
  6. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    Well acutally I did not put on the Alt Pulley becuase I do not have a impact gun to swap it out. I have a nice socket and ratchet set. Would the alignment be off becuase I left the stock Alt Pulley On. And can it be changed with a ratchet? And then maybe torqued with a torque wrench and if yes...
  7. Slo5Oh89

    Belt Squeal with Underdrive Pulleys

    I just installed a set of underdrive pulleys and now I have a belt squealing. It did seem to go away but I tried it with the AC on and it started doing it again when i would rev it? Is it just from the gloss on the new pulleys or any ideas?
  8. Slo5Oh89

    Conv Rear Seat Removal, and top hydraulics replacement.

    Got the back seat out. Has anyone replaced the lift cylinders!?? I removed the interor panel and it looks like a PIA to replace them. Reason I want to replace is there is ATF everywhere and I suspect the seals in the cylinders gave out. I got a used pump off E-Bay for 20 dollars figgured it...
  9. Slo5Oh89

    Conv Rear Seat Removal, and top hydraulics replacement.

    My 89 when I got it top is in bad shape from the hydraulics to the top. I am going to replace the motor and the cylinders look shot too. Should I spend the 100 for new lines? Also any tips when replacing the cylinders? How do I get the rear seat back out!?!? The bottom came out no trouble...
  10. Slo5Oh89

    Need help with inside door handle!! Please

    Well for anyones info, I took the drives side door panel off to see why the pass one is such trouble and it looks like the factory installed the rod backwards and it made the handle fail
  11. Slo5Oh89

    Need help with inside door handle!! Please

    No one has had problems when replaceing the inner door handlle?!?!
  12. Slo5Oh89

    Need help with inside door handle!! Please

    I have a '89 with power locks and windows. Ordered a door handle off of Ebay to replace the one on my passanger door that broke. Looks the same but there is a number different on them. Anyways, when I hook the rod to it where the handle works but dosnt seem to go back to allow the door to latch...
  13. Slo5Oh89

    Pass, Door Wont Lock!

    Anyone know if there is a difference with 4Cyl to 5.0 or power locks and windows to non or 87-90 differences with the inner door handle?
  14. Slo5Oh89

    Real Deal with Nitrous!

    I have a stock '89 5-Speed, MSD, CIA, 68K Miles. I am wanting a boost, how much can a stock engine handle a 75 shot of nitrous? It goes in for 4.10 Gears soon but it wont be enough. Any thoughts from people who have really used it before? Or just work on a Heads and intake kit, or supercharge it...
  15. Slo5Oh89

    Setting Base Idle

    All,,, You guys rock! It runs like a champ now! The idle screw was complety out of adjustment had to turn it around 5-7 times just to get it to run then turned it down to 600 RPM. Cleared the KAM and it runs like a champ now. Once again thanks guys. Id buy you all a drink if I could!
  16. Slo5Oh89

    Setting Base Idle

    Ok,, thats what I was looking for. I will do that ASAP. The reason for the the TPS question is some people on here say it might be out of range to. But I will set the base idle and try that first. Im betting its to low then the IAC has to over correct to so much that it takes the computer so...
  17. Slo5Oh89

    Setting Base Idle

    I am having IAC problems so I am going to set the Base Idle. I had a few questions. Also get a Code 12 with KOER. Im sure the idle have never been touched since it came out of the factroy I am the 2nd owner and he was not one to touch anything under the hood still had Air Sliencer! Its a '89...
  18. Slo5Oh89

    Computer have to relearn after battery cable off?

    So from the Code 12 its the IAC not acting right, It sure dosnt want to idle cold. I guess im going to have to order a Ford replacement part becuase I didnt have the idle issues with the old that would stick at a high rpm. This one is a aftermarket one tired up upside down it wanted nothing to...
  19. Slo5Oh89

    Computer have to relearn after battery cable off?

    Everytime I unplug the battrey cable for a while I get idle issues. Does the computer forget and have to relearn the engine? I have looked at the idle surge list. Really alot of came about when I replaced my sticking IAC did I just get a crap one (NON FORD Replacement)? Or is the power supply to...
  20. Slo5Oh89

    Where to mount my MSD Box!!?!?

    I have a MSD 6A brand new with harness I got for almost free. I have a CIA but there really isn't much room under it as some iv seen. Any idea's on where to mount it. I can relocate the battery but thats a hassle as we all know but get better weight distro from it. Anyone cut a hole in the...
View older results
Top Bottom
Back
Forums
Menu