Search results

  1. gnx547

    What are some good rear control arms?

    Where did you buy your hotchkis control arms?
  2. gnx547

    Installing an oil separator?

    This is how I connected the oil separator. From the "in" of the separator I connected it directly to the pcv valve. The "out" line I connected it to the vacuum tee where the old pcv hose used to be. Is this the correct way?
  3. gnx547

    What part is this next to the ign coil on the 94-95 GT?

    What is its function?
  4. gnx547

    What part is this next to the ign coil on the 94-95 GT?

    What part is this next to the ign coil? It is a small tube. What does this thing do? The wire at the end is exposed and about to come off.
  5. gnx547

    Can someone tell me if this is really a crane cams ign coil?

    I bought a crane cam ign coil ps91 part#730-0391 from Summit and not sure if it is really a crane cam coil. There is no name on the coil, and on top of the electrical connector there is some white residue. There is a sticker on the coil, which is 074401 that does not match the part number or...
  6. gnx547

    Installing an oil separator?

    I'm installing an oil separator on my mustang. I bought the oil separator from home depot. On the separator, one side says "in" and the other is "out". What goes to the "in" side? The pcv valve side or the intake hose side or does it not matter?
  7. gnx547

    What is a good ign coil to use?

    You had problems with your crane cams ign coil?
  8. gnx547

    What is a good ign coil to use?

    What is a good ign coil to use for the 94-95 mustang? I have msd and the coil tip corrode and broke off..What does everyone here use?
  9. gnx547

    Fuel pump stays running when key on engine off??

    What is the CCRM?
  10. gnx547

    Anyone here using the Summit Battery Box?

    Summit sells their battery box for $124, which includes the battery cables, and installation kit. Anyone here using this kit? How is the quality? Are the battery cables good quality cables, and not china garbage?
  11. gnx547

    Question about these valves on my supercharged mustang

    I looked at the back of the heads and I don't see any airtubes. It this air tube noticeable? How big is it? Does this hose need to be connected to the airtube?
  12. gnx547

    Question about these valves on my supercharged mustang

    So the thermactor valve should be close by that hose or the cylinder heads? I looked around and I don't see another valve. Does the thermactor valve look just like the other valves?
  13. gnx547

    What are some good rear control arms?

    What company sells MM control arms for a good price?
  14. gnx547

    Question about these valves on my supercharged mustang

    I have 95 mustang with the power dyne and I found one end of the surge valve not connected. The bottom part connects to the cat and where does the left hose of the valve connect to? Does it connect to the bottom part of the egr valve? On the valve there is a nipple, should there be a vacuum...
  15. gnx547

    What are some good rear control arms?

    What are some good rear controls arms for the 94-95 mustang that are made in the USA?
  16. gnx547

    what is a good aftermarket fan to use for the 94-95 GT?

    I have the powerdyne charger. Yes there are 2 pulleys on the crank. I guess crank pulley on the powerdyne charger is big and that is giving me clearance issues. What other crank pulley can I use for my powerdyne that is a tad bit smaller? How much do spal fans cost? Who sells them?
  17. gnx547

    what is a good aftermarket fan to use for the 94-95 GT?

    Here are the pics, you can see how the crank pulley is very close to the fan motor. And the housing of the fan motor had to be removed so it can clear, but still it is very close to the pulley. By looking at the fan can you tell if it is the factory fan? I think it is the factory fan
  18. gnx547

    what is a good aftermarket fan to use for the 94-95 GT?

    Just the fan motor is really close to the crank pulley. There is not a lot of clearance. The previous owner had to remove some of the metal on the motor housing so it will clear. But now it is exposed and dust and other crap gets down in there. I will post some pics soon. I need a fan that...
  19. gnx547

    what is a good aftermarket fan to use for the 94-95 GT?

    I have a 95 gt that is supercharged and the factory fan is very close to the belt. What aftermarket fans will work for the 94-95 mustangs? Which ones have good clearance?
  20. gnx547

    Good Brand of hood pins to use?

    When drilling the holes for the pins, do you guys drill from the top or underneath the hood?
View older results
Top Bottom
Back
Forums
Menu