Search results

  1. gunnerdog

    deluxe install

    I am installing the brushed aluminum inserts in my 68 FB. How do you remove the knobs on the temp control adjustment. Is there a write up on how to instal these. Cant find one anywhere. THX
  2. gunnerdog

    March underdrive or high flow?

    Thats what I thought. Was just looking for second opinion. THX
  3. gunnerdog

    March underdrive or high flow?

    So which would you guys go for? Is the underdrive worth it or just a pain?
  4. gunnerdog

    5000 to spend need help

    But will that T-5 be able to handle the power out of the engine or future upgades? I Plan on get the traction lock put in soon. Sould I go all out on a good t-56 or do the stroker and finish later? I still have the problem of finding a clutch pedal.
  5. gunnerdog

    5000 to spend need help

    Hey guys this is great. Currently I have a Edelbrach intake and holley 650 carb, headers and the rest is pretty much stock. I also have a stock open rear. Not sure the gear ratio. Not a real engine expert and want to do it right so thanks for the help. Has any bady swaped to a manual from an...
  6. gunnerdog

    5000 to spend need help

    OK I got a 351W that is showing signs of compression loss. An FMX delivering the power out to the wheels. I want more fun out of the car and honestly hate the FMX and want a manual. Should I stroke out the engine to 393, 408, or 427? Or should I get rid of the FMX and try to put a T-56 on boad...
  7. gunnerdog

    Cooling questions

    Cooling problems at all speeds. Air/fuel and timing seem to be good. I am runnning just a little rich now. That factory guage was in place before and didnt give me a good idea of pressure levels. Now letting it sit until I get the problem fixed. I was also wondering if the oil pick up might be...
  8. gunnerdog

    Cooling questions

    I just replaced all the guages adding new auto meter guages. That is when I first noticed that the temp was riding high at 250. I also noticed a week later after switching to Royal Purpal synthetic oil that my oil pressure was at 15 PSI at 2300 rpm. At this time I plan on replacing oil pump with...
  9. gunnerdog

    Cooling questions

    I am running a 4 core radiator and mechanical fan in my 351w in my 69 now. I saw some over heating so it is time to upgrade. Any recomendations for electric fan(dual or single) and Alumininum radiator?
  10. gunnerdog

    A/C question

    Valley82. Thanks allot. Thats the advise I needed.
  11. gunnerdog

    A/C question

    what was the cost to get you R134 installed?
  12. gunnerdog

    A/C question

    Car came with factory air but has not had it installed in years. Has anybody switched over to one of the modern air compressor A/C kits from Mustangs Unlimited or should I just re-intall my old system?
  13. gunnerdog

    Washer tube routing

    Just put a new resovior and motor in but, need to route tubing. Can somebody tell me what route there tubing is placed and if there is one or 2 lines up into the sprayers? THX
  14. gunnerdog

    Temp gauge issue

    The sender is mounted on top of the manifold.
  15. gunnerdog

    Temp gauge issue

    The thermostats both the one I replaced and the new one are 180 degree opening. Temp guage is reading 250 +.
  16. gunnerdog

    Temp gauge issue

    I just installed a new Auto Meter water temp guage and sender in my 69. The guage goes past 250 after about 1 minute after start up if cold but the car does not overheat. Could there be a problem with my install? I also replace my thermostat.
  17. gunnerdog

    Problem with LED taillights

    Got them working. It was a bad ground with a wire. Had the same problem. The regular light worked but the LEDs didn't. Ground fixed the problem. Now that it works I love them.
  18. gunnerdog

    Problem with LED taillights

    I know of their reputation and that is why I am suprised. No return of mutiple phone calls or an e-mail. I istalled the relay they sent me and the factory one. No difference between the two. The one time I did speak to them they thought both units could be bad. I can find anything wrong with...
  19. gunnerdog

    Problem with LED taillights

    I bought Mustang Projects LEDs 3 weeks ago. Finally got them on Tuesday. Getting no tech support from them. I had to reverse the polarity on the plugs to get them to activate and they wont work when I turn on the light and dont sequence at all. What should I be checking to get these to work? Help!
  20. gunnerdog

    Brake adjustment

    I have tracked it down to the brake switch now I need to replace it.
Top Bottom
Back
Forums
Menu