Search results

  1. bdog9seclx

    What are the fuel injectors ratings for max hp?

    is there some data on this ? tring to find some for 87-93 setup for big heads and boost... any help would be great
  2. bdog9seclx

    Need a clutch for 500+ rwhp

    k lllet me know what you come up with thanks
  3. bdog9seclx

    Need a clutch for 500+ rwhp

    any suggestions? centerforce only rated to 350 ft/lbs torgue is a street car so it wont be planting or launching etc
  4. bdog9seclx

    What TB and MAF combo do I need

    Wasnt really going to race this except every now anf then. I want it to be a street car. What size injector do you guys suggest?
  5. bdog9seclx

    What TB and MAF combo do I need

    347 stroker with t-trim but only running 12 lb boost. Boss 302 race block with 235 cc aluminum heads. what size throttle boddy and mass air do i need thanks...also 40+lb injectors
  6. bdog9seclx

    87-93 setup with boss 302 race block

    Looking for injectors for my vortech setup thinking an 80mm mass air with 42 lb injectors i see some on ebay for EV1...im not sure what my 87-93 wiring harness has and what the new lingo is. What injector should i be on the look out for i need at least 42lbs i think for my 347 with t trim but...
  7. bdog9seclx

    idle situation

    trying making sure all your grounds are properly done and all connections are tight. I had went through the whole checklist and had a wire exposed going into the computer since it was a v6 upgraded to 5.0...like your isnt it a efi upgrade. hope helps surging is not fun to tackle
  8. bdog9seclx

    An easy Dilemma boss 302 or stock block with girdle

    pro comp pro comps with 3 angle valve job and mild porting whay whats up
  9. bdog9seclx

    An easy Dilemma boss 302 or stock block with girdle

    yea Ive traded it for a new race boss 302 block in the crate and some brand new 205cc 60cc aluminum heads. Pretty good trade huh?
  10. bdog9seclx

    An easy Dilemma boss 302 or stock block with girdle

    wow got an offer for 2300 for just the block as is. not even the rotating assembley. Might sit on it for a lil while to get the best deal I can. Some items like this are so rare they are priceless to restorers. there were only 1700 boss still in existence in the 70's
  11. bdog9seclx

    An easy Dilemma boss 302 or stock block with girdle

    Yea so I would rather a restorer get this block for a better purpose and buy a dart or new boss 302 that would be stronger. I know the block I have is on ebay for 5k. Any idea what outlets I should go through to sell it to a much needed home? I told my engine builder to hold up on my build...
  12. bdog9seclx

    An easy Dilemma boss 302 or stock block with girdle

    SOhere is the deal i ordered a 331 stroker motor with all 4340 internals balanced long block with afr 185cc etc etc. all in stock block with girdle. I have in my garage a 69 boss block just sitting should i pay the 300 dollar shipping to substitute that stock block? they engine builder said it...
  13. bdog9seclx

    Is a CSR or electric waterpump a good idea for a street car?

    not daily driver but 331 stroker with t trim. any thoughts ideas?
  14. bdog9seclx

    will this work? i have a 2000 with a 87-93 302

    ? yes i have 87-93 harness. so i guess i should ask them if the injector are for the 5.0 harness. is EV-1 87-93 type connector? thanks ive been o9ut of the game for a while trying to get my top end blower ready and stroker ready any knowledge would be greatly appreciated
  15. bdog9seclx

    will this work? i have a 2000 with a 87-93 302

    New Ford Racing 42 lb Green Fuel Injectors set of 8. Ford part # M-9593-F302 & Ford Racing Lightning 90MM Mass Air Meter M-12579-L54. Comes Complete with MAF PLUG as shown! just splice into your harness! This combination has a lot of great uses with the Nitrous and Supercharged cars...
  16. bdog9seclx

    fuel setup for ttrim on my 331

    An yideas? I will be at around 550 with blower 42 lb injectors. found for 239.99 for EV-1 will that fit 87-93 hookup? what kind of deals goin are there for rails/regulator etc? am getting 255 in tank pump and will have the trex as well. as far a MAF lookin at the lightning 800 mm or...
  17. bdog9seclx

    where can I find 2000 cobra front bumper

    not mold but good stuff cervinis is 450 dollars
  18. bdog9seclx

    Vortech Kit incomplete. For install

    ? am i in the wrong forum?
  19. bdog9seclx

    Vortech Kit incomplete. For install

    here is what i have I have: the discharge tube no blow off valve I have the msd_btm (not sure if I have all the wires etc) trex just pump itself mounting plate (1 extra) mounting brackets 90 degree elbow im trying to find a list from vortech so I can just check off the things Looks...
  20. bdog9seclx

    Vortech Kit incomplete. For install

    Im sure this happens a lot. But I have my old t-trim kit off an old car and there are a lot of nick nack equipment missing. What is the best way to go about this?
Top Bottom
Back
Forums
Menu