Search results
-
F
Idle hanging up?
ok I swapped TBs from my 94 parts car, its fixed and it appears it was the TPS as I suspected....- Fopar
- Post #13
- Forum: 1994 - 1995 Specific Tech
-
F
Still having porblems with the idle
hey Hissin, how bout answering a similar question? :stick: http://forums.stangnet.com/showthread.php?t=701704- Fopar
- Post #7
- Forum: 1994 - 1995 Specific Tech
-
F
Idle hanging up?
well I can try it but it worked fine before, have a feeling it'll just keep doing the same thing.... but i'll check when I go home this weekend- Fopar
- Post #11
- Forum: 1994 - 1995 Specific Tech
-
F
Idle hanging up?
continuous bumping until I get replys :mad:- Fopar
- Post #7
- Forum: 1994 - 1995 Specific Tech
-
F
Surgy clunky 95
No it only does it when i'm on the throttle..... 1/4 throttle or more below 2k mostly. Thanks for the reply :nice:.- Fopar
- Post #6
- Forum: 1994 - 1995 Specific Tech
-
F
Idle hanging up?
it's getting worse it seems, hangs up in the 1500 range... tried different IAC same problem... disconnecting IAC kills car.... Could it be a bad TPS? Perhaps showing a higher reading than actual causing the IAC to hang? I disconnected the TPS once and the idle came down but then the motor...- Fopar
- Post #5
- Forum: 1994 - 1995 Specific Tech
-
F
Surgy clunky 95
where's all the tech experts? I thought this was a 94-95 mustang forum?:notnice:- Fopar
- Post #3
- Forum: 1994 - 1995 Specific Tech
-
F
Idle hanging up?
no meter, I tried unhooking the battery it didn't change anything. And now it was starting to hang up at 1500 even when stopped, I checked for vacuum leaks with carb cleaner and no problems there, tried unhooking vacuum lines and plugging still same thing. I adjusted the IAC feed restrictor...- Fopar
- Post #4
- Forum: 1994 - 1995 Specific Tech
-
F
Idle hanging up?
I was swapping around intake tubes/MAFs today to test out some things. When all was done I ended up with the same MAF (but different IAT) and the car drives about the same except the idle hangs up to 2100 or so if you put in the clutch when you're driving, once you get below 10 MPH or so the...- Fopar
- Thread
- Replies: 12
- Forum: 1994 - 1995 Specific Tech
-
F
Surgy clunky 95
:scratch: Well I got this 95 I bought running, it had a small engine fire and needed some wiring but all has been fixed now. The previous owner had the heads rebuilt before the engine fire and supposedly ran good. It appears they did a few mods, I noticed some under-drive pulleys, different...- Fopar
- Thread
- Replies: 7
- Forum: 1994 - 1995 Specific Tech
-
F
Do these cars have limited slips or no?
I got your VIN # now :D.... j/k Well from my calcs one of my rustangs has the 3.08 and the other the 3.27, unfortunately the 3.27 is a parts car :(- Fopar
- Post #11
- Forum: 1994 - 1995 Specific Tech
-
F
this wasn't one of y'all was it?
actually the guy was an ex-cop gone bankrobber, so that's where he learned the skillz- Fopar
- Post #13
- Forum: 1994 - 1995 Specific Tech
-
F
Do these cars have limited slips or no?
just like the title says do they or not? Seems like you can get 2 tires going straight but if you take a corner you get one.... Also what were the available gear ratios, and are there any identifiers on the car (stickers etc I know how to check the rear itself)- Fopar
- Thread
- Replies: 13
- Forum: 1994 - 1995 Specific Tech
-
F
How to take off headrests?
hmm well how does one take the seat covers off nicely if I can't do the hacksaw blade trick?- Fopar
- Post #7
- Forum: 1994 - 1995 Specific Tech