Search results

  1. Grn92LX

    Electrical Female terminals in inertia switch harness?

    Ill try and post pictures later on when I get a chance. It kinda looks like a long think female spade but in a box shape. I could have wired like posted above and had the Holley fuel pump relay trigger wire tap into the green/yellow wire and use that in the trunk as my relay trigger but I...
  2. Grn92LX

    Electrical Female terminals in inertia switch harness?

    The car has a Holley efi kit in it and the factory fuel pump relay is removed. The Holley turns the pump relay on. I didn’t want to remove the new fuel pump relay and move it, I have a relay panel I built under the seat with all my new relays and distribution blocks. I used non insulated step...
  3. Grn92LX

    Electrical Female terminals in inertia switch harness?

    Probably a long shot here but anyone know the female connector type used in the inertia switch harness? I’m looking for ones that can accept a larger gauge wire since I rewired my fuel pump to 10g. Thanks
  4. Grn92LX

    Innovate LC-2 Problem

    Ive been looking at this lc-2 WB controller and the AEM X series WB controller. Ended up buying the AEM unit and wiring the output into my Holley pro dash. Just to monitor the other side. I had an old innovate LM1 dinosaur laying around that I just sold on corral.
  5. Grn92LX

    Electrical Rewiring Ignition coil..Opinions on 2 options?

    Im just about finished wiring up my relay panel hidden underneath the front seat next to my Holley ecu. Im trying to figure out the best option for the ignition coil. I have 2 options: a 10g output from the relay to a step down butt connector to factory TFI pig tail Or A straight 16g wire...
  6. Grn92LX

    Decisions decisions Pro M or Holley Terminator X

    The Holley kits come with the wideband stuff on the harness. There will be an adapter harness in the kit since the terminator X only uses a bosch 4.9 sensor. Its plug and play. Im not sure about your autometer gauges. They should have their own sending units if theyre electric. When you remove...
  7. Grn92LX

    Decisions decisions Pro M or Holley Terminator X

    The engine bay harness is all plug and play. You will need to wire up the ignition coil and fuel pump. You'll wire up the fans as well if you have electric. Get the can cable for live tuning and setting up the ford iac pwm output. Watch Holleys videos for firmware updates and never use a...
  8. Grn92LX

    Engine Machine Shop asked me .....

    28oz and use arp main cap studs. No girdle and no cement. The shop should be telling you what to use, not asking. No one builds 347's with 50oz balance. The less weight hanging off the ends the better.
  9. Grn92LX

    Holley 7'' Digital Dash and 3.5'' Dash read different...

    Definitely sounds like a firmware mismatch. Go to Holley's website, click support, terminator x, then find the 7" dash terminator x firmware you need. Is your ecu on V2 build80?
  10. Grn92LX

    What is everyone using to tune with, laptop wise?

    Im using a cheap lenovo laptop I got on eBay for $100. Works fine for tuning but slow when using internet and downloading firmware updates from Holley.
  11. Grn92LX

    Fox Reasonably priced bluetooth stereo for fox body?

    This looks perfect, thanks. I just wanna be able to use my xmradio app while i drive particularly ch.40 liquid metal:cool:
  12. Grn92LX

    Fox Reasonably priced bluetooth stereo for fox body?

    Whats good and fits the fox dash? Looking for a bluetooth radio so I can use my phone for music. Don't need cd/dvd. Links? Thanks
  13. Grn92LX

    Another Holley conversion finished up

    I like my holley 937f kit, can't beat $1150 delivered for it. I went with the 6.86" pro dash 2 years ago as well. The anderson kit they sell now is a bit overpriced IMO. At that point just look into the holley hp 550-606 kit for a few hundred more.
  14. Grn92LX

    Best Intake for my Combo?

    Port matched Holley.
  15. Grn92LX

    Engine Contour Fan Install

    What are you using to control it? Relays, pwm? I use a pwm module controlled by Holley efi and only need about 60-65% duty cycle to keep mine cool around 185* But I don't live in Florida.
  16. Grn92LX

    Removing cruise control from fender

    I don't remember what i used. Thread sealant or anti seize should be fine. Main issue is they need to be all the way in flush with the cyl head, not just a few turns in.
  17. Grn92LX

    Removing cruise control from fender

    you want thermactor inserts for that. For the cruise control, I really don't remember it was years ago. I removed it and threw it away, don't need it.
  18. Grn92LX

    Removing cruise control from fender

    Hi
  19. Grn92LX

    holley terminator x tuning in vancouver bc canada

    I agree with this, that guy has a lot of positive reviews. I may hit him up for my car. paul, get the usb to can cable from holley. See if the pwn- iac is pinned to output 4 in the software. If its not, your iac is not on and won't work.
  20. Grn92LX

    Fan

    I wouldn't use that junk piece when a contour fan is $80 on eBay.
Top Bottom
Back
Forums
Menu