Search results

  1. D

    A Little Problem with A Snapped off Fitting

    Hey guys, My air compressor today was not holding pressure so I decided to track down why it would not go above 60 psi. I found out the exhaust fitting was cracked. I took the fitting off of the pipe and then tried to take it out of the cylinder head. The cheap ****ty material the...
  2. D

    timing cover ???

    You can use an explorer timing cover...I bought mine off ebay and it worked fine. If I remember correctly there is one extra bolt hole that winds up getting blocked off my the gasket.
  3. D

    Aftermarket Water Temp and Oil Pressure Sending Units

    Thanks for the info... Does anyone have a picture of either of them? -Dan
  4. D

    Aftermarket Water Temp and Oil Pressure Sending Units

    Hey in a couple weeks I am going to be putting in both of these gauges so I was looking for some help/advice. I want to keep it so my stock gauges are still actively working. For the oil pressure gauge I know you can tee it off but it seems really tight in there. I was wondering what people...
  5. D

    Car Not Starting - Need Some Input

    Ok here is my update on the thread...I didnt want to post it too early to make sure that it didnt happen again and two months is a pretty long period of time and with the heat we have been seeing up here in NJ lately I would say it did fix it. I replaced my distributor with an Autozone...
  6. D

    My first ticket

    I can tell you from my own experience...I got a ticket in NJ and it was bull**** but its hard to fight. The cop couldnt even see this but some other people in the back of the parking lot were doing stupid **** in their cars. A cop came a long and pulled me over when I turned onto the next...
  7. D

    zex wot switch or window switch? how can i control WOT?

    Also since I noticed the rip off of a price that zex has on that I figured I would post this up and show you it. Its a TPS and Window switch in one for about 78 bucks less. DynoTune Product, 711.2-DynoTune one Stage RPM Window Switch / TPS - DynoTune, Nitrous systems, Purge kits, Nitrous...
  8. D

    zex wot switch or window switch? how can i control WOT?

    Just to answer your question about the FPSS it is the Fuel Pressure Safety Switch. What that does is if your fuel pressure drops below a certain pressure it will stop spraying nitrous. For example, if your fuel pump decides to die on you in a middle of a run, instead of blowing up your whole...
  9. D

    zex wot switch or window switch? how can i control WOT?

    Ok I was looking around and found a wiring diagram for exactly what you need. So dont even look at mine since that is how I had my NOS system hooked up. If you want to run a bottle warmer just run another power line with another relay attached to it. and then connect one part to the power...
  10. D

    zex wot switch or window switch? how can i control WOT?

    Where to tap in for the Tach: http://forums.stangnet.com/696956-tach-tap-nitrous-etc.html My wiring Diagram with window switch: http://img153.imageshack.us/img153/2500/wirediagramlq1.jpg
  11. D

    zex wot switch or window switch? how can i control WOT?

    I didnt read all the other posts but if you want it to spray between certain rpms you are going to need a window switch. For example you will still have it at hit at WOT but you dont want it hitting at WOT at 1.5k rpms. This would hurt your motor. The best range to spray is having it...
  12. D

    EGR Bung Cap

    I was just wondering how long it took for your guys check engine lights to show up after you blocked off everything? I was driving around for 45 minutes today and it did not come on yet. -Dan
  13. D

    EGR Bung Cap

    I am surprised that you havent run into a few other threads talking about wazee pulleys
  14. D

    EGR Bung Cap

    Yeah I put a flare cap on the actual egr and did a 1979 penny on the header bung.
  15. D

    Installed New Distributor...Now Problems

    Hey JT thanks for the response, I actually found out and got it running perfectly 5 minutes after I posted this. I had the wrong firing order, since I went to allfordmustangs and they have the wrong diagram. Once I put the wires in the right spot everything fell into place.
  16. D

    Installed New Distributor...Now Problems

    So I installed the distributor and everything and I have done this before. I first set it to TDC and then timed it to 10 degrees. I thought by timing it, it would stop being so rough. The idle is very shaky and the whole motor is actually shaking along with the car. It sounds like a...
  17. D

    EGR Bung Cap

    Hey guys, I tried the search but it really sucks since it says nothing comes up for EGR, so anyways, my EGR pipe that I recently made broke on me and now I obviously have a huge exhaust leak. I wanted to block off both the flare on the header and the one on the EGR valve. I saw that 5/8th...
  18. D

    Car Not Starting - Need Some Input

    Ran the car for 45 minutes today and it showed no problems at all. Even when I tried to start it back up. I am going to toss a reman. distributor in for good measure. I mean the stock one does have 100k miles on it now so it was bound to go. Ill keep everyone updated to see if this fixes...
  19. D

    Car Not Starting - Need Some Input

    Ok thanks guys, I was also thinking that it might have been something with the fuel pump or even a clogged line or fuel filter. Normally when something goes wrong on everyone elses car I try and listen to see if the fuel pump is priming but today when mine wasn't working I didn't even...
  20. D

    Car Not Starting - Need Some Input

    Ok so here is the story. I was driving over to my moms house and decided to get some gas since I was really low. I took about 12.5 gallons and normally I don't let it go down this low. So, I pay and then try to start the car up and it won't start. Its cranking and trying to turn over but...
Top Bottom
Back
Forums
Menu