Search results

  1. N

    Disapointed with my dyno #'s should I be?

    I finally got my 4cyl conversion to the chasis dyno today. Everything was changed on the car fuel lines, aftermarket pump etc. It is a built 306 11.1 compression, windsor jr cast iron heads, GT 40 intake, X cam, 24lbs injectors and calibrated maf, Shorty headers, no cats, flowmasters, accufab...
  2. N

    Lowering a car with sn95 spindles?

    anybody?
  3. N

    I need some Tremec 3550 Tech specs

    anybody know how many splines?
  4. N

    Lowering a car with sn95 spindles?

    I have a 93 LX. I put sn95 spindles on the front and rear. I am running 245 45 17 tires on stock sn95 rims. I want to know if I can drop the car without rubbing? And how much I can drop the car? The car is a weekend driver. Thanks.
  5. N

    Fuel pump works then stops then works again

    I have an holley electric fuel pump. Car is a 93. The fuel pump always works fine. I hear it turn on everytime I turn the key. Today I start the car, it works fine. I then pulled my radio out because that is not working. I then start the car again. It starts runs shortly and then stalls...
  6. N

    I need some Tremec 3550 Tech specs

    Thanks for the help. How about the splines on the rear of the output shaft. I think it is the same as a T5
  7. N

    I need some Tremec 3550 Tech specs

    anybody?
  8. N

    I need some Tremec 3550 Tech specs

    I am having a speedo gear reduction box done for my car. I need to know how many teeth on the rear output shaft on the 3550, and also what size and color is the stock plastic speedo gear. Thanks for the help.
  9. N

    Tremec 3550 4.10's Is this a solution?

    Thanks for the help. I contacted a speedo shop and they told me to count the stock speedo gear teeth, output shaft teeth and my tire width. with these three items they can make me up a box.
  10. N

    Tremec 3550 4.10's Is this a solution?

    Ok I've been searching and cannot find an answer. I have a 93 Mustang with a Tremec 3550 and 4.10's. I bought the "Temporary" Chrysler speedo gear from D and D transmissions and it ate it right up. I called them and they told me they no longer make the gear to change in the trans. So is...
  11. N

    Do I need a tune/chip?

    Well I checked my fuel pressure idling with the vacuum line off and capped. It was at 40 psi. Then I installed my msd 6al and bumped the timing to 12 degrees, and now the car seems to idle better and run better. I have an aftermarket fuel pump and an adjustable regualtor with 24lbs injectors...
  12. N

    Do I need a tune/chip?

    I did forget to mention I have 24lbs injectors and the maf to work with them. I see why there is alot of debate. Its interesting Keep it coming.
  13. N

    Do I need a tune/chip?

    I finally got my 4cyl conversion car running. Its a 93. It has a 306 with 11.1 compression GT40 heads X cam GT40 intake, MSD 6al, shorty headers and full exhaust. It is running on the stock 8cyl computer. The car runs good, idles a little rough when its cold but clears up. I have the timing at...
  14. N

    1 Quart too much in Aod trans

    I checked the trans fluid while the car was in park and at operating temp. The level was high. I drove the car around at first and it felt like it had a shift kit in it. It does not. I adjusted the tv cable, and the hard shifts went away. I am still leaking fluid and the fluid is still...
  15. N

    1 Quart too much in Aod trans

    I adjusted the TV cable and now the hard shifting has gone away. I am still leaking fluid and the fluid is still high. The fluid looks like it is leaking out from the inspection cover. Maybe the front seal is shot? Or running out because its overfull?
  16. N

    Thermactor Thermastor Solenoids neccessary?

    Are there any pics of this available? I want to do this soon, and I'm a visual learner :nice:
  17. N

    1 Quart too much in Aod trans

    I recently filled up my auto trans after I took my motor out. The car is an 86 and is all stock. I think I put one too many quarts in the trans when I topped it off. The car runs and drives. When it shifts it shifts like it has a shift kit, but I know it doesnt. Also after I drive it I...
  18. N

    Installing engine with auto trans in car

    finally started the car. It runs and drives. The thing is there is a noise that almost sounds like its from the bellhousing, but it is very sporatic. It is not all the time and sometimes if you rev the motor it makes more noise while other times it doesnt. If the converter was not in all the...
  19. N

    Car wont shift after engine install aod

    The car will start if I push the linkage on teh trans all the way ahead. It will not start in gear or reverse. Could it be the TV cable?
  20. N

    Car wont shift after engine install aod

    Heres the story The car is an 86 efi with and auto it is all stock. I pulled the motor to change the oil pan. Trans stayed in the car. I had some trouble with the install and put it in and the converter wasnt in all the way. I did NOT start the car. I pulled it all apart and I think I got...
Top Bottom
Back
Forums
Menu