Search results

  1. D

    Trac-Loc Rebuild Price

    i got raped for over 500! the whole rear had to come apart in my case..my spider gears were chipped.. and the shim kits to redo it..the clutch packs for the trac lock.. then all the new bearings while its open...the races..the gaskets..crush sleeve. labor...oil....friction additive for the...
  2. D

    tie rod question should they swivel?

    my memory is shot.. i just did my brakes on my dailydriver...the outer tie rods swivel. unlike my mustang which seeem to be frozen in one spot... im thinking this may be why i feel every little bump,and maybe why i get wiggle now and then at higher speeds. my dailydriver rides like a...
  3. D

    SN95 Wheel Bearing Replacement. How hard?

    make sure it aint just loose..mine did it too and it just needed a few turns..but i caught it pretty fast.. \simple to change....that bolt is a pita sometimes... the rears are impossible..have to pull the whole rear apart!! its easy...the front...i did mine in 20 minutes air gun
  4. D

    how much hp can a stock block hold?550?

    guys chill out! i didnt say i want 26psi all the time....i meant i would like to beat the engine to death w/26psi if im going to have to swap my block.. im figuring on 10-15psi of boost and using it cautiously. the thing is when i start a project,i quickly get posessed into going extreme...
  5. D

    polishing stock intake

    yes that kit is good 10 bucks..nice deal at sears..but no sandpsper..3 wheels a mandrel for the drill and 4compounds..perfect for polishing..when you see how hard the polish is your gonna wonder how the hell it works!!you may even think about grinding the bar onto the piece or using it like a...
  6. D

    help white smoke???HELPPPPPP

    thanx....its an idea..anythings possible..the screwy thing is that it freakin smokes after the cars off!! it makes the only sense i ca think of..or bad cats that are so clogged the get cherry red and burn the carbon at the same time.? maybe its the hindu gas station with all the water in their...
  7. D

    how much hp can a stock block hold?550?

    ive seen stock blocks in magazines do over 500rwhp but they cant be lasting too long right?i was told those blocks cant handle cylinder pressure for long at all
  8. D

    how much hp can a stock block hold?550?

    im inches away from pulling my motor and putting forged pistons and rods...but if this block cant handle 475 or upwards im gonna scrap it.. and have fun in the process with 26psi of boost ... theres always an option of those support sleeves that strenghten the combustion chambers too right?is...
  9. D

    polishing stock intake

    dry sand the intake has a coating on it which makes it really sloppy..mine does at least..its a grey weather resistant coat..anyway i would go 80,180,400, 800 1200,,thats what i do anyway,,then use the compound...thats on open pieces..and a air r/angle ///the cracks anf crevices you need to...
  10. D

    help white smoke???HELPPPPPP

    i havent lost a drop of water?or oil?after 600 miles of doing this 1 month.. its white smoke and only smookes at idle....it smells like raw fuel inside the car sometimes ,,especially after i get gas?no leak by the filler neck or tank...fuel pressure good and steady 38psi.....but when i sniff...
  11. D

    Whining from my tranny or rear end, which one is it and what can be?

    if your hearing it thru a range of speed 3,4,5 itsmost likely a bearing.since you say its mostly when your under acceleration is a sign of the pinion bearing..you could climb under your car and grab the axle right at the rear..and spin it back and fourth to see if there is alot of play in...
  12. D

    rims/gas/passengers are hp killers

    i have panther 17 inch chrome rims and they are twice the wieght of the bubble 5 stars i took off...they look cool but i can notice the wieght difference in the handling and the shock absorbtion... can you feel the performance difference between having a passenger and being alone? or...
  13. D

    what gt40 heads are these???HELP

    GT FIZEAA21WCP?? ARE THESE THE EXPLORER HEADS? ANY HELP IS HOT
  14. D

    stall/surge/sometimes high idle PROBLEMS

    thanks man.. yeah i guess i could take that idle air freak off and ream her out.knock the poop out of er .those are good steps BUT.... I HEARD THAT ON 94-95 yoou dont need to check the tps voltage cause when you shut the car it always resets itself at closed throttle,or something like that.. i...
  15. D

    stall/surge/sometimes high idle PROBLEMS

    when i start my car cold/hot if i put it in drive right away it wants to stall or it will sputter and then take off fast.if i give it some gas it wont sputter.. or sometimes it will stay at a high idle when im driving and i let off the gas..like 15 1700 rpms..but when the tranny kicks down or...
  16. D

    steering wheel play in column

    http://www.maximummotorsports.com/steering.asp which one of these was the one you got? flaming river only looks like it sells the rack? im gonna fabricate my column first,,if that fails than ill get a new one...i like to do that stuff anyway,,fixin stuff that breaks and keeping my money ...
  17. D

    steering wheel play in column

    well ford wants 329 .55 for that steering shaft..no way!our year 94 95 is the only year that the shaft joint doesnt unbolt.. CANT I JUST remove that joint?like changing a u joint?someone pressed it in at sometime..so its gotta be able to be pressed out right?THE QUEST is can i get a...
  18. D

    89 gt40 heads/intake fit 95???HELP!!!!!need advice

    thanks my fellow stangsters!! my intake is poopaloop..ill give it away for 50 bucks if someone dont care about looks...someone took a grinder to or a course wiz wheel and grinded the piss out of it...looks like they were trying to make the metal as thin as possible..dont know if thats some...
  19. D

    89 gt40 heads/intake fit 95???HELP!!!!!need advice

    thanks for the info i was looking into this and i got cofused between the gt40 p and gt40?? im thinking the p means aluminum? does anyone know what the cast number should say?they could be heads from a stock gt for all i know??just wanna be safe. my intake is beat up looking someone tried...
  20. D

    89 gt40 heads/intake fit 95???HELP!!!!!need advice

    IM ABOUT TO BUY THIS AND I WANNA BE SURE ITS GONNA FIT...can anyone tell me if its gonna work?i was told by seller i need a 20$spacer for the t/b.. they are iron heads and aluminum upr/lower intake...and the price is 700 plus theyre complete bolt on ready..w/a 303b cam.. any info is greatly...
Top Bottom
Back
Forums
Menu