Search results

  1. T

    What parts need to be ordered.

    No i wont be rebuilding, I was mainly concerned about pushrod length, also will i need guideplates?
  2. T

    What parts need to be ordered.

    I am wondering what parts I need to order to get these heads on, the specs on the heads are 289 heads, with 3/8 screw in studs installed, I am wanting to know what push rods i will need and what do i need to use roller rockers. These will be going on a 89 roller 302 block...
  3. T

    Best 289 heads???

    I am wondering what the best 289 heads are to use??? I'm looking at a set of 65 heads, that have been ported, screw in studs/guideplates, and machined for larger valves..
  4. T

    B303 and cobra rockers

    so would this basically be an f303 cam? wuld it save money jsut to buy the f303 I just dont want to have to flycut the pistons....
  5. T

    cam

    delete ..
  6. T

    B303 and cobra rockers

    wow i didnt know it would give it that much more lift, from .480 to .526 also didnt know it would change the duration from 224 to 226, anyway the block is a 88 or 89 has 80k on it and has never been messed with...... I will have the heads off to put new head gaskets is there a good way to check...
  7. T

    B303 and cobra rockers

    I got a friend who recomended for me to get a b303 cam and cobra rockers... what lift would this give me??? would it save money just to buy a f303 cam, would I need to get the pistons flycut with the b303 combo????
  8. T

    Weird t5 issue!!

    I took a good working t5 out of a 85 gt to put into a 91 4cyc project the tranny sat for about a month with fluid in it, finally got aorund to finishing the project drained and put redline fluid in the tranny, and it wont go into 2nd now??????? i drove the car for months and it was fine before...
  9. T

    Building motor have some questions....

    not to far, you guys goto 41 any???
  10. T

    Building motor have some questions....

    logansport ....
  11. T

    Building motor have some questions....

    I will be putting together a motor soon and would like some input, I need to know what kind of push rods I will need and what what rocker arms, I am using a 74 block bored .60 over. set of 289 heads "small chambers" that have been fully ported/polished, 1.94/1.6 valves, 3angle job.., comp cam...
  12. T

    What Clevland Heads???

    didnt emission laws have somthing to do with it not marketing?????????
  13. T

    Side exhaust for 87-93???

    I had some borla side exhaust, kinda quiet until u went wot......
  14. T

    What Clevland Heads???

    these will be going on a 74 302 block that is .60 over.... what kind of cam do u recomend im looking to build weekend/strip car... so im not to worried if its streetable... but im looking for higher revs. i will have 4.10 gears and a t5 transmission....
  15. T

    What Clevland Heads???

    I am looking into building a clevor, and was wondering what year heads from the 351C are the best???
  16. T

    Both Mufflers Exploded.......What's wrong?

    I had both my mufflers explode literally when my throttle got stuck wot and i kit the key off then back on.......... scary times
  17. T

    Nitrous on 74 block

    I am wanting to put a shot of nitrous on my 74 302, will it be safe to run a 50-75 wet shot??? it has about 75k on it and I think they are cast pistons will it be okay???
View older results
Top Bottom
Back
Forums
Menu