Search results

  1. 8

    can a rear main seal go @ 800miles? if not im screwed

    hey thanx for all the tips guys. the first time i started to wonder about this i went and checked my pcv and it wasnt hooked up. i thought ok maybe that was the problem. but then it still did that and i checked behind the motor where it hooks up to see if there were any puddles any where but i...
  2. 8

    can a rear main seal go @ 800miles? if not im screwed

    well heres the deal, after thinking that i fixed one smoking problem, another one comes up. i guesse my problem is this...my car leaks in 2 diff spots, rite under the drain plug, and about 2 inches to the rite of that. its not the drain plug, its comming from above that. so heres where the...
  3. 8

    347 set up

    i think even with a heavy car and minor suspension ull reach 10'2 with a 200 shot easy. im guessing around 350 rwhp as well
  4. 8

    5 lug/disk conversion this weekend, should I do upper and lower at the same time?

    yah i would. ill be doin my brake concersion soon and already bought some upper and lowers for when i put my other rear end in
  5. 8

    bad oil leak at high rpms

    dude! something is deffinetly wrong. compression is supposed to stay alot closer together then that. i just did mine yesterday and it was 180 across the board except for the #1 & 2 cylinders. 170 and 175
  6. 8

    bad oil leak at high rpms

    damn, thats really weird. i just noticed a huge puddle today too under my car rite at the drain plug. i also have a moroso oil pan. o yah and that smoking problem that i told u guys about was because the plug that i used to plug up where the dip stick goes came out, so oil was spitting out and...
  7. 8

    oil gauge tubing length sender to A pillar??

    damn u sure u wanna put that thing on the inside of your car. i mounted all my mech. guages out side just so that if anything spilled it wouldnt leak in my car and beleive me, it will leak
  8. 8

    How much hp are you guys running in front of your t-5s?

    :lol: thats it!!!!!!!!!!!! (of topic)
  9. 8

    3:73 or 4:10 gears????

    Dont Fear The Gear!!!
  10. 8

    garunteed to pass emissions?

    y is it that u have a better chance of passing emmisions if your car is hotter?
  11. 8

    lots of smoke! is my 347 to much for a stock clutch?

    yah that mught be a good idea but then why doesnt it smoke all the time, and only at higher rpms. i wanna just some how get the car up in the air and step on the gas while its in gear but that doesnt seem to safe of an idea and i dont see how i can make that work
  12. 8

    lots of smoke! is my 347 to much for a stock clutch?

    theres no oil leaking any where. i no that for a fact because my car sits for a couple of days at a time and i have nothing but card board under neath my car and i dont see any thing spilled on it. yes i still have the t-5 and it is fine. it doesnt make any noise, shifts smooth and thats it. the...
  13. 8

    lots of smoke! is my 347 to much for a stock clutch?

    i have a fuel guage thou and it reads 40psi. im sure it could be that but then why would the smoke be exiting from under the tranny and not from near the rear end or something. also, when i put my new shifter in, i took it for a drive to see how it worked but i didnt put the leather boot on it...
  14. 8

    MY LATEST VIDEO!! Very good quality, worth the download!

    yah!!!!!free post!!! o yah, the video is working dude
  15. 8

    What are ALL 4 lug rim options?

    hey super302, if u want some turbines a have a set of four with tires and a set with hossier slicks ill sell ya. im getting a new set of rims so i wont be needing these any more. let me no jorge
  16. 8

    lots of smoke! is my 347 to much for a stock clutch?

    well every since i got my car up and running again, and everytime i step on the gas a smell a real funky smell. im almost 100% it smells like clutch. now today i was looking out my rear view mirror and i was seeing smoke comming out from nderneath my car at 3k rpm crusing. ive also noticed that...
  17. 8

    going to start the 347 today...have question?

    i was told to use the cheaoest oil u can use until the motor breaks in. that what im doin with my stroker and it seems to be fine
  18. 8

    C & L: thoughts and a question

    hey that would be cool. post up the resultsd asa u can
  19. 8

    C & L: thoughts and a question

    i went to go look at my friends car today and hes not running a bog filter like i thought he was. hes using that moroso cold air kit and is using the c&l pipe and he says it works fine. didnt u guys say that the mafs dont work good with the cold air kits?
  20. 8

    What To Do After Exhaust?

    id say get all your suspension done and out of the money. many people over look these mods but a full suspension i.e truts and shocks, springs, upper and lower control arms, subframe connectors and a good set of wheels will knock a git of time off your e.t's. plus once u start doin your motor...
Top Bottom
Back
Forums
Menu