Search results

  1. bynumj

    93 Cobra with BBK Intake and TB issue?

    Forgot to say that there are no other mods to the motor.
  2. bynumj

    93 Cobra with BBK Intake and TB issue?

    I am not a 5.0 guy so I need your help. I just got a 93 Cobra from my father-in-law. It had a BBK intake and TB installed a few weeks ago (before I got the car). The car was not running very good when I got it so I put new plugs, wires, and cap on the car. I also found a vac hose that was...
  3. bynumj

    4.10s and revs?

    Gear Chart Do a search on my post. I have a gear chart posted on this site. It will let you plug in your info and tell you what you want to know.
  4. bynumj

    Front Plate Mounting?

    Here is my plate. I can take it off.
  5. bynumj

    Front Plate Mounting?

    I made a custom bracket for my front plate. It mounts on the lower left grill and is removable. I will post a photo.
  6. bynumj

    Rally Gauges

    What do you think about this rally setup for gauges. -2 gauge rally set (Vac/boost, WB A/F) -3 gauge rally set (Vac/boost, WB A/F, Fuel PSI)
  7. bynumj

    14.618 @ 3192 ft (DA)

    Not wanting to start a war here but 13.5 @104.7 in the 1/4 for a stock mustang, I would like to see it. Maybe down hill.
  8. bynumj

    How happy is everyone with their CAI's?

    +1, I got the same upgrade as you did because the CAI just didn't do it for me.
  9. bynumj

    2008 GT, new exhaust, big mileage drop, help!

    Tune it up. You can get a Custom Tuned SCT X3 Programmer from Brenspeed for $379, tune problem solved for under $400. Also, save teh money on the MAF, return it if that is an option.
  10. bynumj

    SOS Gauge pods

    For clarification, I am not trying to give anyone bad press and I apologize to SOS if it came across that way. The SOS pod was purchased through a third party that drop shipped it from SOS. The issue was handled directly through the third party and I never had contact directly with SOS...
  11. bynumj

    strut/shock/dampner torque specs

    Torque Specs All values are in ft-lb Front Suspension Caliper anchor plate bolts - 98 Brake disc shield bolts – 15 Brake line bracket nut– 15 Lower ball joint nut – 76 Lower control arm forward and rearward bolt – 129 Strut rod nut – 46 Strut-to-spindle bolts – 148 Strut upper mount...
  12. bynumj

    2nd IAT sensor?

    I installed the IAT relocation kit on my car because I am running a Vortech V3 non-cooled kit. I installed it by using the GY and GY-RD wires that went to the MAF (which has an IAT sensor in it). The GY wire is the IAT SN input to the PCM and the GY-RD is the SIG RT to the PCM. Can anyone...
  13. bynumj

    SOS Gauge pods

    I just got the SOS Triple Gauge Pods with the Raptor claw and I have to say that I am not overly impressed. I bought this because everything that I heard was that it was the best part out there for gauge pods. The pods are not evenly spaced and the unit did not come with the raptor claw. I am...
  14. bynumj

    Flowmaster or SLP?

    I had the SLPs on before the supercharger without any dB issues at the track. After the supercharger, it is louder than N/A. The 94dB reading came directly from track officials
  15. bynumj

    this is why we can't have nice things

    Back 40 Parking Only If I am driving my mustang, I always park in the back 40. If it is a small parking lot or crowded lot and there is no back 40 parking, I will not park there and will go somewhere else (to only exception is if there is a nice corner spot that gives you a mile on one side...
  16. bynumj

    Shelby Series one rims. 12" wide in rear.. Will they fit?

    The wheel will not fit. You would need alot more backspace than 7.626" to clear the fender. You would have to measure the fender clearance to see if a 12" wide wheel would even fit with the right backspacing.
  17. bynumj

    Flowmaster or SLP?

    They will do this a little when it is cold and you go from high RPM to idle. With that said, I love my SLP and everyone that hears the car loves them too. I have the stock mid pipe and cats. There is one bad thing about the SLP for me, now that I have the supercharger, the car is almost 94 dB...
  18. bynumj

    Balance issue

    FYI, the retainer nuts (little metal clip washers) on the wheel studs are used so the brake disc does not fall off during factory assembly. Ford instructions say to remove them when you take the disc of for maintenance and do not require them to be reinstalled. Taking them off will not cause...
  19. bynumj

    Tire/gear ratio = MPH

    Here is one I made, I think it is better. Change the .txt to .xls
  20. bynumj

    What size tires???

    I have CS67 20x10 wheels (+45mm offset and 7.26 inch backspace) with 275/35 tires and I am at least 0.5 inch inside the fender edge. The wheel you are asking about has a rim that sits 0.56 inches deeper from the fender than my wheel (assuming that the Razor has a +24mm offset and 6.0 inch...
Top Bottom
Back
Forums
Menu