Search results

  1. K

    GT 4 luger goin 5

    Im not running rear brakes but i have picked up two ranger drums for like 45 dollars new from the parts store. I got my axles from the junkyard for like 75 a piece.
  2. K

    GT 4 luger goin 5

    Youll be fine with the stock brakes up front. As for the axles i think it is 83 to 92. But i am 100% certain that 85-88 will work. You will need two drivers side axles from a ranger along with the drums. Its a pretty easy swap. You dont have to modify the brakes or anything just swap the axles...
  3. K

    Gasoiline getting into the oil?? Bad FPR??!

    how many miles is on the motor
  4. K

    Auto to 5 spd. help please

    I have two clutch pedal assymblies. Will let them go for $60 a peice. Email me at [email protected]
  5. K

    Pulling motor for oil pan gasket, what am I forgetting?

    no cork cork sucks
  6. K

    Tryin on my tux for prom...

    Lol why would i be jealous. I wasn't excpecting to see a guy half naked doing the dishes.
  7. K

    Doors hard to open after new weatherstripping

    lol its probably a good thing at least you know your door wont leak.
  8. K

    What to do with 1,000$

    I highly doubt that motor would need rebuilt unless it had some very hard use or ran low on oil. I highly doubt your going to get all of that with a grand even with a good discount. I would either get a set of heads or go with a intake/cam/exhaust to get you going. 2.02/1.60 is probably going to...
  9. K

    Tryin on my tux for prom...

    i thought your supposed to post pictures of mustangs on this website. argghhh i can bench 215 pounds argghhh. Well im very happy for you guys. So when your car falls on your head while your changing out your tranny you can heave ho but your still s.ol. because after about 30 seconds you pass...
  10. K

    Need help with wiring alternator from scratch on my 66

    the pics help, but lol its for my race car so i dont need lights or anyother thing. Didn't the taurus or something come with a 3g alternator. Wheres the best place to get one?
  11. K

    Need help with wiring alternator from scratch on my 66

    yeah i would but there isnt a harness in this car. Its bare bones, no lights, anything. Just what it takes to start and run and charge.
  12. K

    Need help with wiring alternator from scratch on my 66

    I need help on wiring my alternator on my 66 289. From the back of the alt. to wherever this crap goes.
  13. K

    Update of before and after pictures of 85 circle track car

    well lets see. starting from back to front. 7.5 rearend with i think 2.73 gears, c-4 tranny that is nicely done, and you guys wont like this but a 289 with eldelbrock intake manifold, crane cam that is almost stock profile, and your run of the mill holley 600. My intake is illegal but im getting...
  14. K

    Update of before and after pictures of 85 circle track car

    Well today was the first race since it got rained out saturday. I did pretty damn good i thought. I was mostly just trying to figure out the car for today since i blew out timing cover gasket and blowing oil on my right front in practice friday. I started off in 13th and eventually found my way...
  15. K

    It all went good until.....

    yeah its vented pretty good
  16. K

    It all went good until.....

    i almost did lose it going into the turn cause it was blowing oil onto my front right brake, and i dont run rear so i was going 90 going into the turn. after that one i brought it in.
  17. K

    It all went good until.....

    Well all went good today until..... It was the first day of practice at the circle track with my 85. It started off good until i got it on the trailer. My stinking shifter linkage popped off, but i fixed that when i got to the track. So i got that fixed and was getting excited. I fired it up and...
  18. K

    10.5" Wheels on a Fox is it Possible?

    its called tubing it out. I have 15x8 aero wheels with a 4 in offset with goodyear D-2462 26x8x15 circle track slicks and I had to cut out the front fender a bit. They are about as wide as a 10 inch tire. I have about 2 inches of clearance on the inside on all four corners. And they stick out...
  19. K

    Fresh AOD...have PROBLEMS, CAN ANYONE HELP!?!

    the aod is hard to set up correctly. Its not like a c-4 where you can almost throw it in and go. I would say there is a problem with the tv cable. If you not 100% sure in your work i would take it to a tranny shop and let them adjust everything. Its not worth burning up your new aod and it...
  20. K

    Crossmember brackets

    is the crossmember tack welded on the two tubes that go inbetween the mounts already. I just put a c-4 in my 85 and i had to grind the tac welds off then scoot the crossmember all the way forward then tack the cross member on the tubes again. I dont know if you have tried that or not but if you...
Top Bottom
Back
Forums
Menu