Search results

  1. reddy351

    Resolved Cranks but still doesn’t start. Ran through the checklist and still doesn’t start.

    Finally got the 5.0 swap up and running. Sort of. It will start and run but I need to "work" the throttle to get it to stay running. Pulled the codes, first one out of the box is #22. BAP out of range. (The others are clutch switch and some EGR codes.) The BAP that was the one in the car from...
  2. reddy351

    Engine Speedmaster connecting rods?

    I’m rebuilding a 1994 5.0 for a project car. The rods need rehabbed, of course. By the time I buy ARP bolts and have the machine shop do their thing, it will be around $200. Looking through the Jeg’s website, I see aftermarket rods with a far superior design than stock for a little more than...
  3. reddy351

    Anyone have a AFR185 "Enforcer" and Explorer intake combo?

    Well, back in for an update. Since I created the thread, I've discovered that the complete engine I bought needs completely "gone through". Getting the block back from the machine shop this week. I now have the 1.7 roller tip Magnum rockers, the AFR Enforcers a stone to be completely fresh short...
  4. reddy351

    Electrical finding a stand alone harness vs making one

    You can re-pin the Painless harness to accommodate the SN95 computer. I was going to use a Megasquirt that was for a 94/95 Mustang and DIYAutotune guys gave me the pinout mods to make that work. I'm sure you can simply swap them for the factory computer as well. I don't have the info that they...
  5. reddy351

    SOLD 1994/95 engine wiring harness and T4M0 computer

    I am using a 1994 Mustang GT engine that I bought for a project. It came with the engine harness and I bought the computer side of the harness because I was going to use it. I just bought a Painless engine wire harness and A9L computer so I no longer need the 1994 stuff. It’s in Columbus Ohio...
  6. reddy351

    SOLD For Sale: Brand new Megasquirt MSPNP2, Autometer Phantom A/F gauge and laptop/software to run it.

  7. reddy351

    Can a stock computer on 94 95 Gt hold tunes for h/c/I

    I have one of those Plug and Play 94/95 Mustang Megasquirt systems for sale. I'm not going to use it. Still brand new in the box. Also have an Autometer wideband O2 gauge and sensor as well as a brand new laptop computer to run it that has the software licenses to tune it. Not trying to derail...
  8. reddy351

    95 GT getting Trickflow upper engine kit and more after 20 years parked, help required.

    Ok. Could be why I'm selling mine. I couldn't tell the difference if I tried. It's simply not that important to me.
  9. reddy351

    95 GT getting Trickflow upper engine kit and more after 20 years parked, help required.

    Sorry. I didn't realize you were a "Pimpx" spokesman.
  10. reddy351

    95 GT getting Trickflow upper engine kit and more after 20 years parked, help required.

    Looks like the same thing with a different label, to me.
  11. reddy351

    95 GT getting Trickflow upper engine kit and more after 20 years parked, help required.

    I didn't know there was a MS3 PnP. Their website doesn't show one. This is the one I have https://www.diyautotune.com/product/megasquirtpnp-g2-eec4b8-for-94-95-ford-mustang-5-0-manual-trans/
  12. reddy351

    SOLD For Sale: Brand new Megasquirt MSPNP2, Autometer Phantom A/F gauge and laptop/software to run it.

    Sorry, I forgot to mention that these are in Columbus Ohio.
  13. reddy351

    94 mustang motor swap

    I also have a 94/95 harness and a T4M0 computer for sale...
  14. reddy351

    SOLD For Sale: Brand new Megasquirt MSPNP2, Autometer Phantom A/F gauge and laptop/software to run it.

    This MS plugs right into your 94/95 Mustang harness and makes it completely tunable with the laptop and software provided. Bought all of it in the past year and have never installed any of it so it's all brand new in the box. New, the MS is $860 plus shipping, the A/F gauge is $230 plus...
  15. reddy351

    95 GT getting Trickflow upper engine kit and more after 20 years parked, help required.

    I have a MegasquirtPNP2 for the 95/95 Mustang. Plugs straight into the factory harness. I'm not going to use it so I'll make a deal on that, the wideband O2 sensor and even a brand new Windows laptop that I bought specifically for tuning. I did forget to mention that the laptop has the software...
  16. reddy351

    Engine How far can you go with an A9L (or other) factory computer?

    I guess so. Thank you for your participation. Here’s your medal. Did you happen to notice that I asked NOTHING about if the combo would work? I asked if the A9L would be ok with the combo. Because I didn’t know. I do, now. (But everyone insists on discussing the combo, itself. :rolleyes::rolleyes:)
  17. reddy351

    Engine How far can you go with an A9L (or other) factory computer?

    This combo will run out of cam. And then intake. And then heads. The Enforcer 185 heads flow about 20cfm less than the "regular" cnc ported AFR 185's at every lift point. These are the "as cast" version. They're done at 6000rpm anyway. And the Exploder intake is STILL better than the stock GT...
  18. reddy351

    Engine How far can you go with an A9L (or other) factory computer?

    I didn't know that it had been done "thousands of times". That's why I asked. Specifically. To be fair, I didn't ASK about "better options". Thank you for your participation, though.
  19. reddy351

    Engine How far can you go with an A9L (or other) factory computer?

    According to AFR, only 1986 5.0 engines need PTV clearance checked. Funny how a stock engine management thread has turned into an "engine building advice" thread.
  20. reddy351

    Engine How far can you go with an A9L (or other) factory computer?

    Car is, in fact, a Merkur XR4ti. ~2800 pounds.
Top Bottom
Back
Forums
Menu