Search results

  1. StangAlang0811

    NEED ADVICE Traded for a 94GT.. need schooling

    Where would be a good chip/tuner to get from? American Muscle im guessing.. I know when i had my fox it was pretty uncommon to have a chip in one of them.. Figured the 94 was the same
  2. StangAlang0811

    NEED ADVICE Traded for a 94GT.. need schooling

    I recently traded my 89 fox 5 speed with some bolt ons and gears for a 94gt automatic... its pretty much bone stock.. just an CAI.. I really miss my car but I traded so the wifey can enjoy a stang without learning to shift. I wanna know what I can do to this thing to really pep it up to wear my...
  3. StangAlang0811

    paint job

    Wow, no. If you did a basecoat/clearcoat paint job. Then it is seperate. If you did a single stage paint, then there is a type of chemical in the paint that makes it have a clear coat like finish. They are already together. But it's all the same, Fish Eyes normally come from a contaminate, even...
  4. StangAlang0811

    paint job

    BTW, you dont put hardener in the basecoat!!!!! You use Reducer. Hardener goes in clearcoat! You may have just worded it wrong. But if you did that then there is your biggest Boo Boo
  5. StangAlang0811

    paint job

    Well technically, not sure your exact way of doing it was... But the best is sand it down to the old basecoat, use a tack cloth and wipe the entire area down your about to spray. Spray the primer. Mix as prescribed. Let that dry. Spray your basecoat AFTER sanding the primer with like 400 grit...
  6. StangAlang0811

    paint job

    as an experienced painter, that sounds definately like orange peel. As long as there is enough clear on the car you can try to wet sand with 1500 grit and buff it out. But if your not experienced in it, I wouldn't try it, otherwise you'll be getting a new paint job. If you sand too much, you'll...
  7. StangAlang0811

    Noise From My Wheels/Rear??

    My 89 Hatchback has a small, almost popping slash odd clunking noise coming from rear of car. To anyone with experience with Weld wheels, its similar to the sound a Weld Wheel makes when your loosening the lug nuts, like the pressure being released... Thats the only way I can describe the sound...
  8. StangAlang0811

    GT40P.... worth Porting?

    BTW Im running a 5-speed car.. Im doing 73 or 76mm mass air 70mm throttle body edelbrock RPM 2 (have - seen one on youtube same setup, runs pretty damn well) 24# injectors (have) GT40 p heads (have) MAC gt40P headers FP regulator 190 fuel pump (have) TFS Stage 1 cam 1.6 roller...
  9. StangAlang0811

    GT40P.... worth Porting?

    I sent my heads out to Manloves (thats what they call it in Delaware)(Fischer auto anywhere else). It costed me $48 for trueing them. $25 for cleaning, and $25 for magnaflux inspection. Im doing the valves myself and as you can see, looking into porting. I probably won't mess with it. But...
  10. StangAlang0811

    Fuel injector size?

    if your lookin for new 30's, i do believe CJ pony parts just started selling 30's... There new book has them in it anyways.
  11. StangAlang0811

    GT40P.... worth Porting?

    I have a set of GT40P heads, I have them sent out to get cleaned up and trued up... Im doing a pretty simple budget build. I'm trying to go for a good sounding, wheel torching hot rod. Granted a stock 5.0 are able to sound good and torch tires but Im lookin to step up... Im looking to get a...
  12. StangAlang0811

    Finally got some heads.. but...??

    Thats the great thing about 5 Ohs.. everyone has thier own setup.. tons of options, but as long as it boils down to my car being faster, having more balls then stock, and turning out quicker times in the 1/4 mile with my given setup, thats all that matters to me. With the RPM 2, it gives me the...
  13. StangAlang0811

    Finally got some heads.. but...??

    I REALLY appreciate the comment... I think with the GT40Ps all worked up it should be a nice combo. I couldnt believe that it was too much intake, nice to see someone actually have done what im doing... Ive already got a Holley Avenger 190lph fuel pump, and with the larger injectors and mass...
  14. StangAlang0811

    Finally got some heads.. but...??

    Im new at building a 5.0 up in horsepower and everything working together well. So I figured I'd ask you guys how you think it will work out... My new setup is this 76mm C & L Mass Air (24#injectors) 70MM Proff. Products throttle body and spacer Edelbrock Performer RPM 2 intake BBK Fuel...
  15. StangAlang0811

    GT40P Headers??

    Couldn't I just use a good header wrap? Thermo-tec makes header wrap that withstands up to 2000 degrees
  16. StangAlang0811

    1987- 90 seats the same as '91 - 93 except headrest?

    the plug for your lumbar is different, not sure if your swapping or using the style.. but for sure your plug is different. I ran into that myself.
  17. StangAlang0811

    GT40P Headers??

    I've heard some talk here and there. Wanna know the truth. Will the Summit brand headers for a 5.0 fit the GT40P heads? Do i need to do any mods or need special plug wires? Where do i get these wires if I need them? Thanks for the help
  18. StangAlang0811

    Which, of these 3 things, could be causing my car to leak water like crazy?

    it looks like the weatherstripping could definately use some T.L.C. I don't have as much experience with a convertible like some people, but have you thought of taking a garden hose and spraying different areas to see where the leak is exactly coming from? If you're just going to say screw it...
  19. StangAlang0811

    Need experienced help with intake setup

    ha! know anybody who wants to buy some 24# injectors and an RPMII intake brand new with a spacer and all new bolts?
  20. StangAlang0811

    Need experienced help with intake setup

    What do you think of my combination of parts plus a set of GT40 heads and an E cam? I mean the bigger throttle body is a definate, and the bigger mass air is a no brainer combining those two parts. If im dumpin more air into it with all that, plus a better intake, why not dump more fuel into it...
Top Bottom
Back
Forums
Menu