Search results

  1. AnthonyR23

    won't start any tips

    What did you do in between last time it started and now. Did you change anything with the distributor? I'm confused with your situation. Have you had this car running and it just won't start, has it sat all year, did you change something. What's going on. Honestly I'm sure people here can...
  2. AnthonyR23

    Dripping T5

    Funny, my dad just pointed out to me that my car was leaking just a little, which looked like oil or something, so I checked really well under the car and I could feel a bit coming from the trans, but it seemed to be moreso when I had it jacked in the garage, but noticed it a bit after going for...
  3. AnthonyR23

    Fuel Pressure Drop with Engine Rev

    I know it does seem like a pain to have to drop the gas tank, but I do have this 190lph intank fuel pump that I bought thinking I may need it. But I agree it would be nice to just be able to change the fuel filter which I haven't ever changed. But thinking I am gonna bight the bullet tomorrow...
  4. AnthonyR23

    89 mustang gt auto 87 mustang gt 5 speed & motor swap help please asap

    So really all you would have to do is un-do motor mounts, engine wiring, just connected to engine, and swap the engines, rather than mucking about with the entire harness that runs through the firewall. Does your 87 have any mods? Do you have a mass air meter on it? Has it already been...
  5. AnthonyR23

    89 mustang gt auto 87 mustang gt 5 speed & motor swap help please asap

    My opinion: Buy a A9L computer, Mass Air Meter/Sensor with connector pigtail for Mass Air Meter. Then I would install the A9L computer into the 87 Mustang body which is really easy to do, we'll easier than taking the entire wire harness with you to the 89. Your 87 is probably speed density no...
  6. AnthonyR23

    Fuel Pressure Drop with Engine Rev

    Hi can someone tell me what would be approx. normal fuel pressure psi points roughly. Like let's say you have 39 psi no vacuum. Then wish vacuum hooked up it should drop, to about what??? So when I rev the engine up to let's say 2500rpm what should my fuel pressure change to? Cause mine...
  7. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    So, what I am going to do tomorrow, cause just throwing this out there, and my theory could be totally wrong, but I'm thinking maybe what could be causing the lean to rich codes may not be that I am setting my fuel pressure wrong, checked again today and it was around 39 but seems to fluctuate a...
  8. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    It's definitely A9L. Only mod's are the two pins I had to move for the thermactor system, pink/black wire for pin 19 for fuel pump circuit, which may be giving me code 96 engine off, the only engine off code, and the mass air meter meter wires for the mass air conversion. But other than that...
  9. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    Hi, so today first thing I did was reset the fuel psi to 39. Then took the negative battery cable off, and held down the brake for a minute or so. Then reconnected took it for a drive and came back and checked the error codes. Once again got 41 and 13. So right now just concentrating on...
  10. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    okay I'll try that, then I'll take it for a drive to canadian tire to get a new iac motor. If they have one.
  11. AnthonyR23

    I need help... motor mounts

    My sisters had a 6 in her 83 too.. Could need a new k. Not positive thought.
  12. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    Jrichker, when I turned up the fuel pressure a bit code 41 went away and 92 came up, still with pesky 13, but I need to purchase a new iac motor. Used to have both 41 and 91, but got rid of 91. Replaced both 02's, the one on the right replaced again. So with the pressure up a bit I am getting...
  13. AnthonyR23

    running rich

    Being able to check the error codes would point you in the right direction, if you type in google ford trouble codes, the second link odb & odb2 trouble codes, there is a list of trouble codes. So if you could check your codes it would help. Then at least you would know where to look, eg. TPS...
  14. AnthonyR23

    running rich

    Honestly, that's kinda a hard question. Do you have any error codes, or do you know how to check error codes?
  15. AnthonyR23

    CODE 41 TO 92 - Fuel Pressure Regulator

    Hi so I was getting error 41, but checked my fuel pressure regulator without vacuum and was getting more like 34 psi. So I increased it to 42psi area. Now I am getting error 92. So I tried to back it off, kinda sensitive 38 39ish. Now it's back to 41. Any tips?
  16. AnthonyR23

    96 Off 21,41,13 Please Help! Anyone?

    K, just an update.... kinda just remembered that without vacuum I checked the fuel pressure by jumpering the fuel pump test circuit to get to base of 39 psi. But when I checked it with the engine running/no vacuum, vacuum plugged. It was more like 36 psi. So I adjusted it up to about...
  17. AnthonyR23

    96 Off 21,41,13 Please Help! Anyone?

    Vacuum is good! In the good area on my vacuum gauge!
  18. AnthonyR23

    96 Off 21,41,13 Please Help! Anyone?

    I swapped O2 sensors on the passenger side assuming that code 41 would possibly disappear. But it didn't! Any help would be great!
  19. AnthonyR23

    Starts Up, Stalls Immediantely

    No problem! I know this can be frustrating. I am in the midst of it too. Its too bad there wasn't someone around in your area with a fuel pressure tester kit. Think mine was 40 bucks from canadian tire. If you lived in the area I would let you hook it up. Rather than throwing money at it...
  20. AnthonyR23

    Starts Up, Stalls Immediantely

    Thanks ID89GT, MustangSquared. Found it.... it was just open back there and capped at the tb. Wonder if it will run better now. Thanks!! Any luck 5LitrePwr. I'll let you know too if I figure out engine off code 96.
Top Bottom
Back
Forums
Menu