Search results

  1. R

    Lower Intake Bolt removal help!!!!

    yah, snap on makes a tool for removing stripped bolts.. buy the right tool for the job and get it done quick
  2. R

    cant lock up brakes after rear disc install

    I have already gutted the valve and installed the ford cap on the end, I have a 93 cobra master cylinder, willwood adj proportioning valve in the brake line above the pass firewall were the connector is, t bird rear end with brakes and stock front calipers. any other reasons why it might not...
  3. R

    will power door lock actuators from a 93 or so taurus fit?

    my friend has like a 92/93 taurus, I am wondering if the power door lock actuators would fit since mine in my 89 stang are bad?
  4. R

    cant lock up brakes after rear disc install

    my master cylinder is solid on the end.
  5. R

    cant lock up brakes after rear disc install

    i just finished my rear disc install "tbird rear disck conversion" and now I cant lock up the brakes. it feels really close to wanting too lock up but just wont, it stops okay but feels like it needs just a little bit more, I have my adj proportioning valve adjusted all the way in, leaving me...
  6. R

    brake pedal goes to floor if I let it sit

    I just finished installing my tbird axle with rear disc's and have the 93 cobra master cylinder. my problem is that the pedal goes to the floor. I have bleed the lines a million times. when I pump the brake pedal, the pedal will get hard, but then if I let it off and then wait a sec and hit...
  7. R

    tbird rear swap hardline to softline question

    thanks unfortunatley , I accidently tossed the tbird brake lines out at my work the other day when I was cleaning the axle up, and the garbage people took it away, so looks like im going to have to try and bend the stock hardlines, but Ill probally make it work.
  8. R

    tbird rear swap hardline to softline question

    yeah. thats makes since, but i still am confused about the adapter lines, it says I need two of them? well, I guess I will try the tbird lines... any more into is great and thanks v8 only.
  9. R

    tbird rear swap hardline to softline question

    hey, I would and still can use the hardlines on the axle from the tbird rear. but everyone kept telling me that i needed conversion adapters to adapt the factory hardlines to the tbird softlines, so I bought them. anyway, matts site says I need them, but I guess I could just use the tbird...
  10. R

    tbird rear swap hardline to softline question

    hrmm.. then howecome everyone says I need the softline adapters from matts website
  11. R

    tbird rear swap hardline to softline question

    ttt
  12. R

    tbird rear swap hardline to softline question

    im in the middle of swapping my disc brake axle right now and am trying to make the stock hardlines for the drums reach the new caliper softlines. do I need to bend the brake line "hard line" to make it come back and go into the hardline port?or do I dismound the bracket and then coneect them...
  13. R

    still got check eng light/vehicle not responding

    thanks. I will give it a try.. ill get back to yall.. thans for all the diagrams jrichker
  14. R

    Cam install this Sat., have questions.

    NO!! you do NOT need to loosen all of the oil pan bolts, and doing so will probally cause it too leak. you only need to remove the bolts under the timing cover, and on the sides, leave all the others alone. the are like two different size pan bolts going through each side under the cover...
  15. R

    still got check eng light/vehicle not responding

    okay, I moved all my wires from the drivers side, "solenoid and harness etc" to under the drivers side fender. then I have a check engine light immediately. it stays on, and the car runs really poor, detonates under a load. I checked everything and feel like its all hooked up.. I moved all of...
  16. R

    still got check eng light/vehicle not responding

    I still cant figuire out why my check engine light is on after I moved wires to under fender. light is on all the time, car runs really crappy,. and when I try to scan it, it says vehicle not responding.. I have tested all the circuits for continuity to the cpu and are all good, also checked...
  17. R

    Taurus or Mark VIII Electric Fan

    I would reccommend the TBird fan, I just picked one up at the junkyard from a '96. it was only 40 bucks.. but Ive seen them going for $85. I also have seen the same fan in the 93 bird also, but don't know all the years, and I think they came in both the v8 and 3.8 versions in the 90's
  18. R

    still cant figuire out check eng light

    okay, i am getting soo mad at this car.. I just moved all my wires back to inside the engine compartment "they were in the fenderwell" I had the starter solenoid and all its wiring and all the grounds that are under it under the fender. I just moved them back to the engine compartment because...
  19. R

    anyone in santa cruz san jose area?

    all right, ill try to take a pic this weekend. and post it
  20. R

    vehicle not responding

    they are all the way in the scanner, and if I try to jump the data link to read the codes off the dash,"check eng light blinks," it does nothing, like the cpu doesn't even see the data link.
Top Bottom
Back
Forums
Menu