1966

I'm working with my son on the 66 with a 1993 5.0 swap. The heater box was toast so we replaced that in the fall. The fan motor bench tested A-OK on it's own and mounted in the heater box before installing in the car. However, now the squirrel cage is rubbing loudly in the housing. I...

So I have a 67 coupe with a 66 200 straight six in it followed by a c4 automatic transmission. I am running into issues with spacing with the starter. Gone through 3 already. I am missing the bellhousing separator plate and I can't seem to find this piece anywhere. It is backordered on cj pony...

So I’m wiring up factory style fog lights on my 1966 Mustang, and I’m at the part where I have to splice the blue/black wire of the fog light wiring harness into a power source. I’ve read that instead of splicing into the main harness, I could instead use the post at the back of the ignition...

I just got my 1966 in December, well it sat for 10 years out side and was never started or moved. so I went into the brake system first and foremost after I got her running. I spent almost 2 weeks researching and finding what vehicle was used to do the disc brake conversion / 5 lug swap on the...

Hey guys - Yesterday I swapped out my old thermostat, replaced the fuel filter and replaced the positive battery cable. Sprayed down the carb with cleaner. I’m now having this clicking noise when attempting to turn over. Any ideas?

I’m building a 1966 Shelby GT-350 Convertible, want to know what type of 4 spd was installed? And if it’s a Borg Warner T-10, what was the spline count? And is anyone selling one? Thanks for any input given.

[SOLD] Listed is a NEW Exterior Door Handle Kit, Chrome, Made in USA for 1965-1966 & 1969-1970 Mustang. This kit includes both the driver and passenger side handles, gasket pads, buttons, attaching hardware kit and pads shown in the bag (see pictures). *Also fits 1964-1965 2-door Falcon/Comet...

[SOLD] These were originally purchased new in the 90's from a parts department at Ted Britt Ford (a Ford dealer) in Fairfax, VA (last ones from the east coast I was told at the time of purchase). These are not aftermarket parts, they are Ford parts made with Ford tooling and can't be bought...

These were purchased new from a Ford dealer in Fairfax, VA (last ones from the east coast). These are not aftermarket parts, they are Ford parts and can't be bought from Ford anymore. They were stored inside and never used. I no longer have the project I intended to use them on. They are in...

I bought this engine from a friend who totaled their 2014 F150 with 15,000 miles. Truck was rear ended. Was going to use for my 1967 mustang coupe. I am realizing how expensive the swap is going to be so thinking about selling. Motor is almost brand new and has everything except throttle body...

Hello, new member here. Have a 66 convertible that has just had the ¼ window regulators replaced, and I am having a problem. I used new Scott Drake parts. The window seals well to both the roof and the front window...no problem there. However, when I lower the rear windows (both sides), about...

These were purchased new from Ford (last ones from the east coast), but they were stored inside and never used. They are in great condition and currently located in Springfield, Virginia. I am currently listing these for local pickup only at this time. Meant for coupes and possibly can be used...