I was changing a Differential Pressure Feedback Sensor on my 1994 Ford Mustang 3.8 L and noticed a hose disconnected from a cylindrical sensor that is just dangling. I reconnected it and snapped a pic and circled the sensor in red in the attached pic. Could you help me in identifying the sensor...
I have an sandrail with a 99 3.8. The guy I bought it from said it was dynod at 197 hp. I am looking for a turbo kit. To add another 100-125 hp if possible on 91 octane. I am tearing the motor down for a full rebuild. I am a decent vw wrench. Many turbo vws. Just new to the 3.8.
Any...
Hey everyone so I need some help. About a month ago she started acting up and misfiring so I put on a new coil pack. It got better but not much so I took it to this mechanic. We’ll long story short he messed it up more so it wouldn’t drive. There’s no spark from 2, and 6 so I put new plugs and...
2002 Mustang 3.8 Automatic 198,564 Miles
Current mods: MAC OffRoad H-Pipe, K&N CAI, MSD Wires
I got a code for misfire on cylinder 5 (P0305) a month after rebuilding the upper end of the engine (had a blown head gasket). The car ran extremely smooth and got great gas mileage before the problem...
Hey, so I’ve got a 2004 40th edition 3.8 L automatic (I’m looking for a solid manual trans as we speak). It’s sat in my stepfathers pasture for three years. And I just bought it from him. So my problem is a HUGE loss of power when I accelerate. It just sputters and it sounds like it’s misfiring...
I will say in all the years of being ASE certified I’ve never in my life seen a goofy harmonic balancer as my 2000 3.8 has. It had a massive oil leak around the main seal and timing cover area so I took it apart and found what is either scoring grooves or I’m just going nuts over nothing. The...
Hello all,
I've got a 1986 3.8L Convertible Mustang LX that I'm looking to upgrade the alternator on. I'm not looking to do a 5.0 swap on it, but want to update the alternator with a 3G one. I've found a couple of different ones online but I'm having trouble understanding the wiring. I'm not...
I recently purchased a 1999 Mustang with a 3.8l V6. When I do the gauge test and go to the codes I get the code dt 08FF. I cannot find what this means or if I should be worried about it at all. Any help would be appreciated, thanks in advance.
Recently bought a 1995 Ford Mustang 3.8L V6 as a project car for $300. Didn't start or run, and it had been sitting in a garage for 4-5 years. It needs a lot of love.
The previous owner said it stalled while driving one day and he never looked into the problem. I'm a beginner and excited to...
So I’m having trouble with the drive belt rubbing on the tensioner. Couple days ago the belt broke off and notice the tensioner broke. So I replaced both and now the belt rubs on the tensioner. Thinking that pulleys are misaligned idk. Doesn’t make any noise but the tensioner gets very hot.
So i recently went out and picked up a Vortech Supercharger for my 94 v6 and had some questions i thought someone may have some knowledge about but first some overview of the car. So i got the car about a year ago at this point as basically a fill in car that would look cool till i could get...
So it started when I plugged a usb charger into my aftermarket deck in my car... I heard a weird whirring noise accompanied by a loss of my back light illumination and audio output to my deck. Basically rendering it useless. I tore into it and checked the deck directly with the battery & it...
I need help my 2001 v6 mustang manual tranny is grinding really bad when I try to get it in reverse alot more grind than the normal clunk or slam it's gotten to the point that I have to turn my car off and start it in reverse to save me from embarrassment I am 100% sure the tranny is good...