Hey everybody, new to Stangnet, and the car community itself as well. I have an an 89 5.0 manual LX hatch. Bought it with an Edelbrock high rpm intake, 3.55 rear, headers, exhaust, and possibly a cam. I'm not too sure if it does for a few reasons. I may swap for a decent cam in the future...
Hey Guys,
So I have a forged 347 currently running N/A with a 9.5-1 Compression ratio, E303 Cam, 30 lb/hr injectors, and a 190 L/hr fuel pump in my 89 Lx. I was told the motor was built for boost (hence the low compression ratio and cam). I am told it had a supercharger but the prev owner...
Hey everyone, I own an f150 07 with the 4.6 2v so I came here because the mustang bois know 2v inside and out unlike f150 ppl. Anyway I wanna put a supercharger on it, procharger btw and I have 2 questions 1 how reliable would it be at 220000 miles,I know they are reliable aff but want to make...
Hey guys i have a 97 cobra with a vortech s trim , running 10 lbs of boost , dyno sheet says 440whp , im not the original owner of the car but want to turn the boost up , so im curious what the rear end will handle , i dont know if it has any axle or diff upgrades , unless some
One can tell me i...
I have a vortech supercharged 2006. It's pushing 460 to the wheels and 450 tq. I want to get it to around 600, however, I know there are measures I need to take before then. I was wondering if these steps were reasonable. On 10psi from 3.6 pulley.
Long Tube headers and X pipe in a two weeks...
Hey guys I have just acquired a 97 cobra , and I am told it has H beams and forged pistons , it does have an air to air and , a larger throttle body , runs 9-10 lbs of boost , I’m just curious if anybody has an idea what kind of power I should see on the dyno , any guess’s or answers would be...
Hey guy so i have a complete twin turbo kit, still in the process of installing it right now. Just want to go over some things to get a complete rundown on everything that is going to be done. So currently the motor is rebuilt, all new bearing and forged interals in an 89 block. Gt40p heads...
Hi everyone, currently t/s an issue with my 2v.
Car specs(short):
Built 2v 4.6 Vortech S/C downsized pulley pushing 18 psi
Fuel: 2 Ford GT pumps lined to two FPDM supplied by BAP with the wire upgrade.
History:
Has driven fine for about a year since the finish of the build and tune. Last...
Hey all, this is my first post and it's going to be my build that I will be doing soon, I keep getting told by my friends that I need to post my builds so they could potentially help others with my findings and tricks i've learned.
So a little about the car(3rd fox), it has a slightly cracked...
Hi guys! So the car:
04 mustang GT vortech V-2 with a 2.7in pulley
Heads: Trickflow 44cc 2v
Custom cams Bullet Cams: I can get numbers if it matters
Cobra crank and pistons
8 rib serpentine belt
Heavy duty A2W intercooler, I do not have heat issues( can go into this if it matters).
Fuel twin...
Hi I was getting dyno tuned by Watson Racing in Michigan and after they were done checking over the tune in asked if I could have a tune for dyno days. I wanted to run the car to 6k instead of stock Rev limiter which is 5500 I just wanted a few more hp right now it makes 301 and 305 tq to the...
Price:200
City:Hartland
State:WI
Description: Used Ignition Control Module
Model Year: 79-2004
Up for sale is a MSD 6 Series (6462) BTM Ignition Control Module with an Auto Meter Sport Comp Boost Gauge (3304). Included with the ignition module is the boost retard knob and a single pillar mount...