Hello,
Was hard to get into first gear so had Mike's Transmission in McKinney Texas install a new clutch kit for my 2005 V6 Ford Mustang. He said that he used the MOOG kit.
Ever since the kit was installed there is a Rattle or Vibration Noise coming from the transmission while the car is...
I own a 1986 GT and I have noticed that when driving on the freeway going 70 mph or higher, after I release the gas pedal to slow down a bit I hear a deep vibration noise coming from the back right wheel area. It sounds like something is whining but it is a very deep tone. The car leaks brake...
Until 1300rpm there is a dragging metal on metal noise in every gear. Sounds like a metal cable dragging against something metal spinning. Noise goes away with higher speed at 1300rpm. No noise cruising above 50mph in 5th for instance at or above 1500 rpm. But there is noise early as every gear...
Alright, this is my first post here so if I'm doing anything wrong, let me know.
2000 Mustang V6 with stock 4-speed automatic transmission.
The short version of the issue is that I'm hearing a metallic knocking sound coming from the front half of my car, there is no check engine light, and...
Hello everyone,
I have a 91 hatch (as you can tell by the name lol) there is this odd noise i hear when ever i am driving my car, when ever i am braking or coming to a stop there is a creaking noise that seems to be heard from what sounds like the passenger rear? possible its a strut...
I have a 1996 mustang gt with what sounds like a rattle in the timing chain. I’ve changed all the sprockets. Chains. Guides. Arms. Tensioners. Harmonic balancer. Everything. But the noise remains. I’ve had the timing cover off 4 times trying to figure this out. Any ideas? It’s an intermittent noise.
I have a 2004 v6 5 speed and on occasions it will make an awful sound. I’m unaware what it is as I’ve never heard it before. Any help is good. It has made the sound both with the clutch pressed in and while sitting at idle with it out. Already replaced Idler pulley, belt, and tensioner...
(If this isn't the correct forum for this, please direct me elsewhere.) I've got my '69 Mach 1 interior pretty much gutted and prepped. I will be putting in some sound dampener everywhere (Dynamat type stuff), but I'm stumped about the doors. I see on the internet pictures showing the...
Okay everyone I have a 1994 GT 5 speed.
About a month after I got it a noise formed that I could manipulate if I actuated my clutch. With my clutch Pedal at the floor no noise but when the pedal was up and my clitch was engaged there was a squeak. It got worse, people told me different things...
I have a 2000 Mustang GT 5 speed. It has longs tubes and an O/R H-pipe. When RPMs are falling between 1500-1000 there is a loud rattle coming from under the car somewhere from the front wheel well to the seats. It sounds as if I'm taking a hammer and beating two pieces of metal rapidly. As soon...
Hey guys again... I've done my research and I came up with nothing so I need the stang family to help me out with this.. I have a 1994 mustang gt 5- speed it's has a completely re done suspension from front to back you name it i did it (now I was being lazy and didn't put the pinion snubber on...
I have a 2000 Ford Mustang V6 3.8L engine with a 5 speed manual transmission. We believe the car was in an accident at some point. The title says by previous state NV : rebuilt. The car shows minor quirks that resemble an accident and it seems a little loose when driving it. When driving the car...
Mustang Clutches, Flywheels & Accessories - See Them Here: http://www.latemodelrestoration.com/products/Mustang-Driveline
Is the clutch in your Fox Body or SN95 Mustang slipping or making some awful noises? Then it is time to tackle the Mustang clutch replacement project! With the help of...