parts

  1. C

    For Sale 1974 Mustang V6 - Parts and Car

    I have a 1974 mustang that's been sitting for a while. It's complete with engine and transmission. Cranks over but doesn't run at the moment. Has a hole in gas tank. It doesn't have fully original interior, but... I also have parts from a Ghia Model sitting in a shed. I should have everything...
  2. Tods Hot Rods

    For Sale 2000 GT Convertible 4.6 5 SP Exterior/Interior parts remaining from donor car

    For sale are the remaining exterior and interior parts from a 2000 GT convertible 4.6 5 SP parts donor vehicle that was in my shop. All parts have been removed, degreased and cleaned and some painted. My shop used the tremec trans, the BBK THROTTLE body intake and rims and tires for one of my...
  3. BridgtonJeff

    1977 302w production date problem

    Hello all! I have recently acquired a '77 Ghia w/ 302w. Upon changing out the cap/rotor/plugs/wires I found that the 302w had two production phases that year: pre June 28th and June 28th on. Dealerships and part stores all offer different wire lengths for based on the split, neither of which...
  4. K

    rebuild kit suggestions/help??

    ok SO I have a 91 fox gt and I'm needing to rebuild the engine. I'm curious as to if I need to buy a specific rebuild kit (I may need pistons and the whole shebang) for my year, or if I can use a more popular engine year like 1989. I've looked on summit and CJ pony parts and it seems that...
  5. P

    Sway bar bolts?

    Hey everyone, I took out my front sway bar and the off the fire stabilizer bolts broke off of their brackets (there the ones that install into the frame - pictures included). Does anyone know where I can find these? Looks like they sell them for 2003+ Crown Vics but I can’t find them for this...
  6. DudeStang

    For Sale FS: Steeda Tri-Ax Shifter & Barton Shifter Bracket (11-14 MT-82)

    Got a couple of parts for sale from my 2014 GT. The Steeda Tri-Ax short throw shifter is a little bit dirty but it's close to new. I had it on my car for approximately 1,000 miles. All hardware included (there's a little spring that came with it too for adjustments but it's not in the pictures)...
  7. N

    are body parts of a 1987 Mustang compatible with a 1981 model?

    Hi, I'm new here! I recently bought a 1981 Mustang Ghia hatchback. This may sound ridiculous but, although I love it the way it is, I often think about trying to make it look like a 1987 Mustang some day. The last Fox Body models are by far my favorite when it comes to the way they look...
  8. V

    For Sale 75/76 assortment of parts for sale

    Hi all. I'm extreamly new to this fourm and really only joined to hope full find a good home for the parts I have. No luck on generic classified sites so I figured I try going to a place I know there might be intrerest. Long story short used that have a 76 cobra II and parts for fender bender...
  9. S

    For Sale 2013 California Special Parting Out

    Car: 2013 California Special Mustang Trim Level: Hatchback Body Style: California Special Interior Color: Black Exterior Color: White Transmission Type: Automatic Mileage: 36000 Location: 274 Old S Ave, Stratford, CT 06615 Prices: Motor Condition: Broken timing chain cover Price: 3000$...
  10. M

    Having Problems Getting Parts From Ford?

    2015 Mustang GT. Had about a year with less than 6K miles. Just had my first maintenance. The AC quit working so I took it to AutoNations Ford in Frisco, Tx. and the following is what happened: 1. AutoNations Frisco said the Evaporator Core was bad (Really? On a brand new car? It must have...
  11. SOC_DOC32

    Expired For Sale, Aluminator Short Block, 03 Cobra Fr500 Heads, And Enginless Project Car

    If anyone is interested I am parting ways with my (ZERO "0" Miles on it) 4.6L Aluminator Iron sleeved DOHC Engine assembly. It is a built for boost via Centrifugal Style Supercharger (I do not have a Supercharger for this car) stuffed with a 298ci STROKER rotating assembly from Livernoise...
  12. Yet Another Way to Make your Late Model Mustang Rock!

    Yet Another Way to Make your Late Model Mustang Rock!

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Cal Pony Parts has been creating these late model Mustang engine dress up kits for years, but now this product is one that really looks good. And, it goes on easily. Watch my video and see how...
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford mustang gto mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  13. How to Fix Broken Mustang Ball Joints - www.OperationMustang.com

    How to Fix Broken Mustang Ball Joints - www.OperationMustang.com

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang http://www.OperationMustang.com - 30 Min Bi Weekly Classic Car Web Show. All Shows Archived on the site! http://www.ClassicMustangTelevision.com - 100s of Free How-To Videos. How to Fix Broken...
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford mustang gto mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  14. How to Jack Up your Classic Car the Right way

    How to Jack Up your Classic Car the Right way

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How to Jack Up your Classic Car the Right way
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford mustang gto how to videos jack up my car mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  15. Lay a Floor in a Classic Mustang Fastback

    Lay a Floor in a Classic Mustang Fastback

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Lay a Floor in a Classic Mustang Fastback
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford mustang gto how to videos mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  16. How to Remove Classic Mustang Fenders

    How to Remove Classic Mustang Fenders

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How to Remove Classic Mustang Fenders
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford mustang gto how to videos mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  17. How to Remove that Classic Mustang Radio

    How to Remove that Classic Mustang Radio

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How to Remove that Classic Mustang Radio
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout carroll shelby inter classic mustang radi cool doctor ford ford gt ford mustang gto how to how to videos mach mach 1 mustang parts restoration shelby xxx
    • Comments: 0
    • Category: Mustang Technical Videos
  18. How To Tighten Loose Convertible Mustang Tops

    How To Tighten Loose Convertible Mustang Tops

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How To Tighten Loose Convertible Mustang Tops
    • theStangDoc
    • Media item
    • 1965 mustang 1966 mustang 1967 mustang 1968 mustang 1969 mustang burning burnout cool doctor ford ford gt ford mustang gto how to videos mach mach 1 mustang mustang convertible parts restoration shelby tighten convertible xxx
    • Comments: 0
    • Category: Mustang Technical Videos
Top Bottom
Forums
Menu