00 GT What Next??

importrx7 · Jul 30, 2006

I've got a 00 Gt with BBK CAI and MagnaFlow Catbacks on the car.

What should i do next?

I must be able to get it from jegs LOL cause i want to get whatever i can tomorrow since im in columbus!!

I want to be able to still use reg. fuel call me cheap but thats why i sold my 3rd Gen. Rx-7.

I was thinking bbk headers until i found out how hard it was.

Im thinking about tuner, high flow cat, throttle body, tb and plenum or some pullies i dunno what one is the easiest to install and will stay within my guide lines and still give me a good power increase?

tradde · Jul 30, 2006

importrx7 said:
I've got a 00 Gt with BBK CAI and MagnaFlow Catbacks on the car.

What should i do next?

I must be able to get it from jegs LOL cause i want to get whatever i can tomorrow since im in columbus!!

I want to be able to still use reg. fuel call me cheap but thats why i sold my 3rd Gen. Rx-7.

I was thinking bbk headers until i found out how hard it was.

Im thinking about tuner, high flow cat, throttle body, tb and plenum or some pullies i dunno what one is the easiest to install and will stay within my guide lines and still give me a good power increase?

If you really insist on sticking with regular grade fuel, then I would say the
tuner won't do much as one of it's major features is to allow your car to
run on premium fuel and thus being able to run with more timing. I myself
would think your best bet would be the underdrive pullies. All the other
mods you mention will add minimal HP. But the nicer sound of a performance
exhaust is always nice.

Pennywise2 · Jul 30, 2006

Welcome to Stangnet.
If you are only buying from Jegs than a GMS plenum and
70mm BBK throttle body,BBK underdrive pulleys,and a
Predator programmer would be a good bang for the buck.
You should be able to install them with basic hand tools.
The Predator is just plug and play.
Cool what mods did you have on your 3rd gen. RX7?
Just wondering?
Good luck tomarrow!

nwapache · Jul 30, 2006

+3 pennywise!

tomustang · Jul 30, 2006

Pennywise2 said:
Welcome to Stangnet.
If you are only buying from Jegs than a GMS plenum and
70mm BBK throttle body,BBK underdrive pulleys,and a
Predator programmer would be a good bang for the buck.
You should be able to install them with basic hand tools.
The Predator is just plug and play.
Cool what mods did you have on your 3rd gen. RX7?
Just wondering?
Good luck tomarrow!

Do not ever mention that company around here

Cantslowdown · Jul 30, 2006

I knew tom would say something about GMS..But he isnt lieing..Is your car a automatic are 5 speed..I must say the best bang for the buck mod would be gears..

Mike97gt · Jul 30, 2006

GMS hell they have been sucking for a long long time.. I remember when they had the only product ever tested in GMHTP magazine that LOST HP.. If the magazines can't even fudge someting good to say about your product then you must REALLY SUCK.

how about the LCA's they make that break in half? those are real nice.

I am not surprised tom had somthing to say about GMS, them and SHM are his favortie companies..

importrx7 · Jul 30, 2006

Thanks for the info.

My 3rd Gen Rx-7 was highly modified LOL

Greddy T-78 Single Turbo W/ t-88 hot side
Greddy 2-Row front mount intercooler
Griffin Radiator
XS ignition
1680CC Secondary Fuel Injectors
Custon Secondary Fuel Rail
Apex'i PowerFC
Pettit Underdrive pulleys
Greddy Elbow
Greddy Boost Controller
3'' Downpipe, midpipe, catback w/ 5'' tip

I was running only 14psi on the stock motor still (never blew so never ported) 400RWHP 327RWTQ car was capable of 500+rwhp with ported motor.

Put it this way it would destroy my mustang and lots of other mustangs i've seen at drap race and road course

I loved the car but i love my mustang too and the mustang is more pratical so thats why i bought it. Back seat better gas mileage and a good amout of power to boot

fastangboi · Jul 30, 2006

I was in the same boat like 5months ago with my 00. im currently running
Ported and polished upper intake
FIPK 2 K&N kit
Pypes o/r X
Flowmaster 40s
BBK underdrives
Denso Iridium Power (1 step colder)

Looking to add:
75mm TB
Plasma Booster
Xcalibrator tuner
4.10 gears
3,000 stall TC
and i really should look into getting some tires that will hook better than Kumho Extsa Supra 712

thomas91169 · Jul 30, 2006

^^^WTF is a plasma booster?

tomustang · Jul 30, 2006

thomas91169 said:
^^^WTF is a plasma booster?

blood injection

SilverBullet00 · Jul 30, 2006

thomas91169 said:
^^^WTF is a plasma booster?

I think its like a piggy back ignition system..

importrx7 · Jul 30, 2006

I put on a 75mm BBK Throttle Body and BBK Plenum. The intake is louder for sure, it changed the exhaust note slightly for the better, and throttle responce is better. Power gains im sure there are some there and i can't completely tell but it feels like i've got some more power up top and it revs through a lil easier.

Keeping in mind this is my daily driver that i want to keep reliable, get decent gas mileage, but still producing power.

I'm thinking about some pullies but they might be a bitch to install.

How much farther can i push it on reg. gas and maintaining daily driveablity and reliablity?

Cantslowdown · Jul 30, 2006

I would say gears..I have 3.73s and i have automatic and i can get 23mpg hwy...

importrx7 · Jul 30, 2006

I've got a 5 speed

Cantslowdown · Jul 30, 2006

then you would prob get a tad better mpgs then me..but gears wake are cars up alot..

importrx7 · Jul 30, 2006

Whats the price range for some good gears and how difficult is to install

Cantslowdown · Jul 30, 2006

Gears and install kit was like 185..I had mine put in it costed 210..They are kind of pain to install if you dont know what your doing..But they are worth every pinny i think..

Pennywise2 · Jul 30, 2006

importrx7 said:
Thanks for the info.

My 3rd Gen Rx-7 was highly modified LOL

Greddy T-78 Single Turbo W/ t-88 hot side
Greddy 2-Row front mount intercooler
Griffin Radiator
XS ignition
1680CC Secondary Fuel Injectors
Custon Secondary Fuel Rail
Apex'i PowerFC
Pettit Underdrive pulleys
Greddy Elbow
Greddy Boost Controller
3'' Downpipe, midpipe, catback w/ 5'' tip

I was running only 14psi on the stock motor still (never blew so never ported) 400RWHP 327RWTQ car was capable of 500+rwhp with ported motor.

Put it this way it would destroy my mustang and lots of other mustangs i've seen at drap race and road course

I loved the car but i love my mustang too and the mustang is more pratical so thats why i bought it. Back seat better gas mileage and a good amout of power to boot

Really nice set up!
I think if you would have ported it you would be streching the limits of
the stock motor.
Anyways yes get gears like FRPP 3.73's they are worth every Penny on
are cars.The install is a PITB though but, it is worth it.

AmBo · Aug 1, 2006

My 3.73s were like $180 and the install was $160 from a local mechanic friend. Best SOTP mod so far. I think the supercharger is going to win the SOTP feel though.

00 GT What Next??

New Member

New Member

Banned

New Member

Psychotic Member

New Member

it doe snot

New Member

My first set of nuts vibrated themselves off.

I'd donkey punch my sister.

Psychotic Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Banned

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency