I have a 01 gt motor and trans I put in my 00 roller. Everything is wired up and ready to go, I get a crank no start with no anti theft light coming on. The anti theft light shows up when i turn the key to on position but turn off after like 3 seconds. I got no spark at no 1 plug and i do have fuel pressure at the rail. I did use the 01 gt harness and used it as plug and play not too sure if that is my problem. I had the roller out for a little bit with the hood lob sided and moisture may have gotten on the main plug as well as a few others. Where can I check besides obviously cleaning them out. I used QD electric cleaner on all the pigtails. Not too sure what to check next and help would be great