Engine 01 gt

Carboni · Jun 28, 2025

Hey guys and gals I just got an 01 gt and new to mustangs ,
So I had the manual transmission rebuilt and installed bbk shorty headers and now it don't crank or start it just clicks but it ran before transmission was pulled and headers were put on I am stumped any help would be appreciated thank you in advance.

gkomo · Jun 29, 2025

Who did the work?

Maybe a connector somewhere got left unconnected after reinstall action.

Any codes thrown? Could help narrow it down if so.

greg94 · Jun 29, 2025

When starter reconnected, was door, hood, trunk left open or was radio used for music. Could be simply battery! Worth a try.

Carboni · Jun 29, 2025

I don't think it's a battery issue the battery has 12.25 volts and when cranked it only drops to 10 volts it ran when pulled out of shop and back in to replace a power steering line then nothing no codes everything else works but won't start

squeak93 · Jul 19, 2025

Check all connections again, make sure no pinched or broken wires and clean all grounds, especially those in the starter wire pack.

Noobz347 · Jul 19, 2025

Carboni said:
I don't think it's a battery issue the battery has 12.25 volts and when cranked it only drops to 10 volts it ran when pulled out of shop and back in to replace a power steering line then nothing no codes everything else works but won't start

Tell use [exactly] what maintenance had been performed since you picked it up and drove it home from the shop.

It dosn't sound to me like it's anything the shop did. It sounds to me like you got it home, did some more [stuff] and then this issue appeared.

Is this correct? What maintenance did you perform after you got it home?

nickyb · Jul 19, 2025

Could be battery,starter,ignition switch,or wires.
Start by giving her a jump start,and if she still clicks then tap on the starter while turning her over.
Let us know how it goes.

Engine 01 gt

Carboni

New Member

gkomo

now i can hopefully expect to receive the shaft

greg94

Carboni

New Member

squeak93

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

nickyb

I gotta say i never painted my nuts, Never Ever

Similar threads

Engine 01 gt

Carboni

New Member

gkomo

now i can hopefully expect to receive the shaft

greg94

Carboni

New Member

squeak93

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

nickyb

I gotta say i never painted my nuts, Never Ever

Similar threads

Privacy & Transparency

Privacy & Transparency