• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

03 Cobra questions

  • Thread starter Thread starter DJT03GT
  • Start date Start date Dec 30, 2003
D

DJT03GT

New Member
Oct 27, 2003
187
0
0
New Jersey
Dec 30, 2003
#1
  • Dec 30, 2003
  • #1
Just wondering, all the cobras with KBs and other aftermarket power adders make 500+ HP, are they on the stock bottom end? How much can the 03 Cobra shortblock take? Also how much can the 6-spd tranny take, HP and torque wise?
 

Saleen201

Founding Member
Jan 26, 2002
1,271
0
0
Doha, Qatar
Dec 30, 2003
#2
  • Dec 30, 2003
  • #2
DJT03GT said:
Just wondering, all the cobras with KBs and other aftermarket power adders make 500+ HP, are they on the stock bottom end? How much can the 03 Cobra shortblock take? Also how much can the 6-spd tranny take, HP and torque wise?
Click to expand...

Yes they are all on the Stock bottom end, and you can even make the stock engine get over 500 RWHP without changing the blower.

I dont think there is a definate answer on how much the bottom end can take, I would like to know as well. There was a magazine article about somebody who had a KB Cobra that was putting out over 600 hp and had never even taken the valve covers off. I cant seem to find the article, ill keep looking for it.

-Mike
 

2K1GtfromSC

Founding Member
Oct 9, 2002
705
0
16
West Columbia, SC
Dec 30, 2003
#3
  • Dec 30, 2003
  • #3
There are a few guys making 700+ on a stock bottom. Some with spray some with out. What they are running into are fuel supply problems. Anything over 500-525rwhp needs 55# injectors & BAP along with a great tune. The T56 can handle the power. The half shafts want last long along with some other rear end parts.
If you really want more info do a search over @ www.SVTPerformance.com
John
 
D

DJT03GT

New Member
Oct 27, 2003
187
0
0
New Jersey
Dec 30, 2003
#4
  • Dec 30, 2003
  • #4
Thanks for the replys, I wanted to get a forged stroked shortblock and KB for my GT, but by time I add a new tranny and rear it would cost a ton. So i was thinking just get an 03 and add a KB for 3800. Then I wouldnt need a new shortblock or tranny. And those Cobra seats would just be and added bonus. I was looking at a used one for 29K with 3000 miles. Doesnt seem to bad for only 3K miles.
 

2K1GtfromSC

Founding Member
Oct 9, 2002
705
0
16
West Columbia, SC
Dec 30, 2003
#5
  • Dec 30, 2003
  • #5
DJT03GT said:
Thanks for the replys, I wanted to get a forged stroked shortblock and KB for my GT, but by time I add a new tranny and rear it would cost a ton. So i was thinking just get an 03 and add a KB for 3800. Then I wouldnt need a new shortblock or tranny. And those Cobra seats would just be and added bonus. I was looking at a used one for 29K with 3000 miles. Doesnt seem to bad for only 3K miles.
Click to expand...

If I ever get a KB I'm only running 13-15psi 500-550rwhp any more like I said you will need to upgrade but for a daily driver like me anything over 550 is not very streetable. I have hard enough time in stock trim keeping the wheels from spinning.
 

2K1GtfromSC

Founding Member
Oct 9, 2002
705
0
16
West Columbia, SC
Dec 30, 2003
#6
  • Dec 30, 2003
  • #6
You can get a new 03' for 29k. Now if was a sonic blue I would be talking them down on the used one. Don't forget to look it over with a fine tooth comb. Get them to run an oasis report to see if anything has been replaced Tick, ect...
 

spree

New Member
Apr 20, 2003
294
0
0
los angeles
Dec 30, 2003
#7
  • Dec 30, 2003
  • #7
2K1GtfromSC said:
You can get a new 03' for 29k
Click to expand...

after incentives, right? if not, show me where
 

2K1GtfromSC

Founding Member
Oct 9, 2002
705
0
16
West Columbia, SC
Dec 30, 2003
#8
  • Dec 30, 2003
  • #8
spree said:
after incentives, right? if not, show me where
Click to expand...
after incentives, One local dealer has $7052 off verts = 32,300 .
 
E

el_kid_1

New Member
Oct 30, 2003
738
0
0
Puerto Rico
Dec 30, 2003
#9
  • Dec 30, 2003
  • #9
Saleen201 said:
Yes they are all on the Stock bottom end, and you can even make the stock engine get over 500 RWHP without changing the blower.

I dont think there is a definate answer on how much the bottom end can take, I would like to know as well. There was a magazine article about somebody who had a KB Cobra that was putting out over 600 hp and had never even taken the valve covers off. I cant seem to find the article, ill keep looking for it.

-Mike
Click to expand...
I saw a 03 Cobra putting out 603 rwhp at the dyna last Friday. It had a KB with the 17 psi pulley. It was just crazy. The funy part is that it had a baby car seat on the back. Both bottom end and tranny were stock.
 
D

DJT03GT

New Member
Oct 27, 2003
187
0
0
New Jersey
Dec 30, 2003
#10
  • Dec 30, 2003
  • #10
I didnt know you could get a new 03 for 29K. Wonder how much i would loose on my trade...
 

2K1GtfromSC

Founding Member
Oct 9, 2002
705
0
16
West Columbia, SC
Dec 30, 2003
#11
  • Dec 30, 2003
  • #11
I had a dealer quote me 30,500 over the phone in a 20 min conversation. It was a new Redfire in Augusta. that was 3 weeks ago. I'm sure it could have come down more.
 

wjfawb0

Founding Member
Jun 7, 2002
929
0
0
Georgetown, KY
Dec 30, 2003
#12
  • Dec 30, 2003
  • #12
I paid $30,500 for mine on September 6th, 2003. They had $2,500 rebates and I also got the x-plan price through my cousin who works for ford. A friend just bought a silver 03 with chrome wheels a week ago for about the same. I think they are offering $3000 rebate now. Dunno for sure. You can go to http://www.svt.ford.com and see what incentives they are running. that or search for incentives in your area on the ford.com webpage.

-Jason
 

wjfawb0

Founding Member
Jun 7, 2002
929
0
0
Georgetown, KY
Dec 30, 2003
#13
  • Dec 30, 2003
  • #13
Also, a word of advice. If you go to buy one with x-plan, d-plan or a-plan, make them show you the invoice with the plan price. I have seen several dealers try to tack on a $250 scotchguard fee and quote that as the x-plan price. Don't let them get anymore than the x/d/a-plan price, and make sure you get any rebates offered.

-Jason
 

stallion98gt

New Member
May 12, 2003
1,802
0
0
Los Angeles, CA
Dec 30, 2003
#14
  • Dec 30, 2003
  • #14
DJT03GT said:
Thanks for the replys, I wanted to get a forged stroked shortblock and KB for my GT, but by time I add a new tranny and rear it would cost a ton. So i was thinking just get an 03 and add a KB for 3800. Then I wouldnt need a new shortblock or tranny. And those Cobra seats would just be and added bonus. I was looking at a used one for 29K with 3000 miles. Doesnt seem to bad for only 3K miles.
Click to expand...
stroked is nice too 5.0 or even 5.3L....that's pretty sweet...I would go that way...
 
D

DJT03GT

New Member
Oct 27, 2003
187
0
0
New Jersey
Dec 30, 2003
#15
  • Dec 30, 2003
  • #15
stallion98gt what do you think a stroked KB motor would make, HP wise? For the price of that setup plus what i already have I would be stuck with a 40K GT. 23K car, 6K mods i already have, 5K shortblock, 6K KB. Thats a Cobra right there, with some mods.
 

stallion98gt

New Member
May 12, 2003
1,802
0
0
Los Angeles, CA
Dec 30, 2003
#16
  • Dec 30, 2003
  • #16
DJT03GT said:
stallion98gt what do you think a stroked KB motor would make, HP wise? For the price of that setup plus what i already have I would be stuck with a 40K GT. 23K car, 6K mods i already have, 5K shortblock, 6K KB. Thats a Cobra right there, with some mods.
Click to expand...
a 5.0 with P&P heads/aggresive cams: around 310 rwhp.
a 5.3 with P&P heads/aggresive cams: around 380 rwhp.

then u add the KB: on a stock GT (225 rwhp) with 14psi u will make around 500 rhwp so basically u double

so 5.0 with Kb: around 590 rwhp
5.3 with KB: around ...660 rhwp...not bad uh ?

pretty much in any case :cobra or GT , u wanna buy a KB...so what comes in the picture is tranny and stroked/forged block.
u can get a TKO v.10 from x2c for $1,600. it will handle 870 ft of tq.
stroked/forged short block run around 4K. P&P heads/cams around 2.5K.

how much money do you think u will lose by trading ur GT for a cobra ? tha tmoney could go right into that tranny/new short block.

just my 0.02...
 
D

DJT03GT

New Member
Oct 27, 2003
187
0
0
New Jersey
Dec 31, 2003
#17
  • Dec 31, 2003
  • #17
Yea that makes sence, Im still undecided, the Cobra has a lot of small bonus to, like the seats, and bigger brembo brakes. Like you said, the money im gonna eat on my GT probably could pay for a short block. Guess I just need to think...
 
You must log in or register to reply here.

Similar threads

W
I have some 4.6 questions.
  • whiskerz
  • Nov 14, 2025
  • SN95 4.6L Mustang Tech
Replies
5
Views
258
SN95 4.6L Mustang Tech Nov 25, 2025
squeak93
Fox Good shop in Washington state or Oregon
  • keel
  • May 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
90
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
keel
J
Power Wire Upgrade Question
  • jhaling
  • Dec 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
220
SN95 4.6L Mustang Tech Mar 23, 2026
Noobz347
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
231
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
598
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?