• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

05 GT vs MACH1 race RESULTS.....thats right...RESULTS!

  • Thread starter Thread starter GNN60GT500
  • Start date Start date Sep 28, 2004
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
Next
First Prev 6 of 8 Next Last

351CJ

New Member
Dec 11, 2002
1,732
1
0
Sep 29, 2004
#101
  • Sep 29, 2004
  • #101
The M/T article has the HP & torque #'s wrong. They are using Ford's preliminary data from several months ago.

M/T #'s
300 HP @ 6,000 RPM
315 lb. ft @ 4,500 RPM

The latest version of the '05 Mustang Dealer Order Guide says:

300 HP @ 5750 RPM
320 lb. ft @ 4,500 RPM

As far as comparisons to the Mach 1 go, from Ford's website: http://www1.forddirect.fordvehicles...State=ConfigPage&xefrProd=1620193&statetoken=
Then click on "See all standard features" The Mach 1 is listed at:
305 HP @ 5,800 RPM
320 lb ft. @ 4,200 RPM

So the Mach 1 engine is rated 5 HP more, but it has the same torque rating. Yes I know that the Mach 1 is underrated, but the first dyno #'s for the '05 GT indicate that it is also underrated. The Mach 1 appears to really have 325 - 330 HP, It also looks like the '05 GT really has 320 - 325 HP.

An ATX '05 GT should be faster than a ATX Mach 1 off the line because it has a 5 speed trannie with a much shorter 1st gear (3.23 vs 2.84). But the Mach 1's higher redline will close the gap down the track.

The bottom line is that an '05 GT will give you similar straight line performance to an '03 - '04 Mach 1, but on regular gas instead of premium.

By the way I have nothing against the '03 - '04 Mach 1's. I love them and came very close to buying a used Azure Blue '03. I just couldn't justify it knowing that sooner or later I'd be getting an '05 or '06 GT or SE.
I consider the Mach 1 the best of the SN95 Mustangs. I love the wheels, the overall look, the shaker the better seats, brakes, mufflers etc. etc. But as good as the Mach 1 is, the '05 GT and its follow on SEs will be better.
 
M

mach1dsg

New Member
Sep 28, 2004
84
0
0
Orange County,CA
Sep 29, 2004
#102
  • Sep 29, 2004
  • #102
 
S

STUD

Banned
Aug 7, 2003
34
0
0
Sep 30, 2004
#103
  • Sep 30, 2004
  • #103
GNN60GT500 said:
Mach was a 5 speed as well....

SVOKING.....I see you are somewhat new, so I will excuse your sarcasm, but if you knew more, you would not question me
Click to expand...
Ignore SVOKING, he's a joke and a troublemaker, and so are his ridiculous posts.
 
S

Snakeeper

Member
Jan 1, 2003
46
0
6
Corona, Ca
Sep 30, 2004
#104
  • Sep 30, 2004
  • #104
I was getting on highway 133 in Irvine Ca. and low and behold, a lime green 05 gt with Saleen marks ! I pulled right next to him and gave a thumbs up. He looked at me and pointed straight ahead. We were at 65 mph and we both punched it. I immediately pulled one. two , and three car lengths up to 120mph! Boy my adrenaline was pumping. I hope that this person will post and fess up! It was a nice run before he pulled off on the Barranca Exit! I feel great with all the rumors that the 05 can put us down!
 
0

04torchredgt

New Member
Feb 29, 2004
22
0
0
mcdonough,ga
Sep 30, 2004
#105
  • Sep 30, 2004
  • #105
I don't think us mach1 owners have a chip on our shoulders about the 05 gt.but everyone is saying the 05 gt is faster than a mach1 without seeing what a 5speed gt can run in the 1/4.the only proof I have seen is a 99.9 mph trap speed for a auto.If a 5speed gt can run a 13.1-13.3 and trap 103-107 in the 1/4,then you can say it is a drivers race.hell, I don't care if the 05 traps 110.I did'nt buy the mach to be the fastest mustang on the road,don't get me wrong I really do like the 05 and wish I could put one in the garage next to the mach.In the next couple of weeks we will see where the 2 stack up.I think it's gonna be close and that does'nt bother me one bit.but untill then everyone just take a chill pill. here's to the 05 and the mach1.now lets go kill some imports not one another.
 
S

Snakeeper

Member
Jan 1, 2003
46
0
6
Corona, Ca
Sep 30, 2004
#106
  • Sep 30, 2004
  • #106
351CJ said:
The M/T article has the HP & torque #'s wrong. They are using Ford's preliminary data from several months ago.

M/T #'s
300 HP @ 6,000 RPM
315 lb. ft @ 4,500 RPM

The latest version of the '05 Mustang Dealer Order Guide says:

300 HP @ 5750 RPM
320 lb. ft @ 4,500 RPM

As far as comparisons to the Mach 1 go, from Ford's website: http://www1.forddirect.fordvehicles...State=ConfigPage&xefrProd=1620193&statetoken=
Then click on "See all standard features" The Mach 1 is listed at:
305 HP @ 5,800 RPM
320 lb ft. @ 4,200 RPM

So the Mach 1 engine is rated 5 HP more, but it has the same torque rating. Yes I know that the Mach 1 is underrated, but the first dyno #'s for the '05 GT indicate that it is also underrated. The Mach 1 appears to really have 325 - 330 HP, It also looks like the '05 GT really has 320 - 325 HP.

An ATX '05 GT should be faster than a ATX Mach 1 off the line because it has a 5 speed trannie with a much shorter 1st gear (3.23 vs 2.84). But the Mach 1's higher redline will close the gap down the track.

The bottom line is that an '05 GT will give you similar straight line performance to an '03 - '04 Mach 1, but on regular gas instead of premium.

By the way I have nothing against the '03 - '04 Mach 1's. I love them and came very close to buying a used Azure Blue '03. I just couldn't justify it knowing that sooner or later I'd be getting an '05 or '06 GT or SE.
I consider the Mach 1 the best of the SN95 Mustangs. I love the wheels, the overall look, the shaker the better seats, brakes, mufflers etc. etc. But as good as the Mach 1 is, the '05 GT and its follow on SEs will be better.
Click to expand...
Dude! The Mach 1 has 3.38 first gear, so if the GT is 3.23, it is obvious who will be quicker off the line! If you mean an auto trans, I don't know what the first gear is in this one.
 
9

95cobra#161

New Member
Sep 27, 2004
2
0
0
Sep 30, 2004
#107
  • Sep 30, 2004
  • #107
hi everybody i'm a newbe. just going thru the threads here and have to say "i'm pretty disaponted in the way some are acting" i own a 95 Cobra and i'm not mad that the newer 99 up gt's have more power than me hell i'm glad to see Ford finaly giving us people that don't have "3 new cars and make more money than every body on here" a chance to have what we all like and whant that is more and more power and a better handling Mustang as the years go on for a reasonable price. I THINK WE SHOULD BE GREATFULL!!
 

nito88stang

Founding Member
May 23, 2002
2,012
0
46
Fullerton, California
Sep 30, 2004
#108
  • Sep 30, 2004
  • #108
Snakeeper said:
I was getting on highway 133 in Irvine Ca. and low and behold, a lime green 05 gt with Saleen marks ! I pulled right next to him and gave a thumbs up. He looked at me and pointed straight ahead. We were at 65 mph and we both punched it. I immediately pulled one. two , and three car lengths up to 120mph! Boy my adrenaline was pumping. I hope that this person will post and fess up! It was a nice run before he pulled off on the Barranca Exit! I feel great with all the rumors that the 05 can put us down!
Click to expand...
Saleen is based in Irvine. Might have been a tester.
 
M

mach1dsg

New Member
Sep 28, 2004
84
0
0
Orange County,CA
Sep 30, 2004
#109
  • Sep 30, 2004
  • #109
351CJ said:
The M/T article has the HP & torque #'s wrong. They are using Ford's preliminary data from several months ago.

M/T #'s
300 HP @ 6,000 RPM
315 lb. ft @ 4,500 RPM

The latest version of the '05 Mustang Dealer Order Guide says:

300 HP @ 5750 RPM
320 lb. ft @ 4,500 RPM

As far as comparisons to the Mach 1 go, from Ford's website: http://www1.forddirect.fordvehicles...State=ConfigPage&xefrProd=1620193&statetoken=
Then click on "See all standard features" The Mach 1 is listed at:
305 HP @ 5,800 RPM
320 lb ft. @ 4,200 RPM

So the Mach 1 engine is rated 5 HP more, but it has the same torque rating. Yes I know that the Mach 1 is underrated, but the first dyno #'s for the '05 GT indicate that it is also underrated. The Mach 1 appears to really have 325 - 330 HP, It also looks like the '05 GT really has 320 - 325 HP.

An ATX '05 GT should be faster than a ATX Mach 1 off the line because it has a 5 speed trannie with a much shorter 1st gear (3.23 vs 2.84). But the Mach 1's higher redline will close the gap down the track.

The bottom line is that an '05 GT will give you similar straight line performance to an '03 - '04 Mach 1, but on regular gas instead of premium.

By the way I have nothing against the '03 - '04 Mach 1's. I love them and came very close to buying a used Azure Blue '03. I just couldn't justify it knowing that sooner or later I'd be getting an '05 or '06 GT or SE.
I consider the Mach 1 the best of the SN95 Mustangs. I love the wheels, the overall look, the shaker the better seats, brakes, mufflers etc. etc. But as good as the Mach 1 is, the '05 GT and its follow on SEs will be better.
Click to expand...

here is a dyno graph showing both cars a 01 cobra and 03 mach 1, both cars are bone stock.

i don't know why ford is posting max hp at 5800 rpm on the mach 1???
i swear i could tell it was 6000rpm before, but i can't remember now....
maybe those are the numbers for the automatic one
anyways both cars would peak at around 6100rpm, both cars can be shifted at 6800rpm

 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Sep 30, 2004
#110
  • Sep 30, 2004
  • #110
1. shifting that car at 6800 is assinine
2. that is a great example of whiy the 4valve does awesome with 4.30+ gears
 
M

mach1dsg

New Member
Sep 28, 2004
84
0
0
Orange County,CA
Sep 30, 2004
#111
  • Sep 30, 2004
  • #111
our trannies have a little gap between 1st and 2nd gear
3.38 to 2.00 on the mach
3.37 to 1.99 on the cobra
i don't know about the cobras, but shifting at peak power (6100rpm) on the mach from 1st to 2nd, would make the rpms to drop to 3600 on 2nd gear.
shifting at 6800 would make them drop at 4000-4100. right where the peak tq is at.
the mach 1 put down better tq in the middle of the curve, so it doesn't need to be shiftted that high in 2nd and 3rd gear. 6400-6500 from 2nd to 3rd, 6200-6300rpm from 3rd to 4th.
 

351CJ

New Member
Dec 11, 2002
1,732
1
0
Sep 30, 2004
#112
  • Sep 30, 2004
  • #112
Snakeeper said:
Dude! The Mach 1 has 3.38 first gear, so if the GT is 3.23, it is obvious who will be quicker off the line! If you mean an auto trans, I don't know what the first gear is in this one.
Click to expand...

Dude.

The 1st gear trannie #'s I gave are for ATXs.
03-04 Mach 1 (& GT) ATX 1st gear = 2.84
05 GT ATX 1st gear = 3.23

For MTXs, both the Mach 1 and the '05 GT use the exact same MTX, the T-3650 which is 3.38.
 
B

bartzmach1

New Member
Sep 30, 2004
5
0
0
Sep 30, 2004
#113
  • Sep 30, 2004
  • #113
another mach1 guy.

not to conflict with anybody but how does a manual stock '05 pull away from a manual stock mach1 when they

both have around the same power
They have the same transmission
I believe the same gears in the rear.
but the new 05 weighs more. ( *edit* sorry weighs more then the gt but not the mach i should research a little more )
I think they would be close, but i would have to give the win to the 04 mach. given equal drivers in a 1/4 mile race. (*edit* I hope. )

On a side note it would be nice to have to pay for regular gas instead of prem. gas

The more i see the 05 the more i like it though.
cant wait for the svt
 
T

TomServo92

New Member
Dec 22, 2003
517
0
0
Texas
Sep 30, 2004
#114
  • Sep 30, 2004
  • #114
bartzmach1 said:
another mach1 guy.

not to conflict with anybody but how does a manual stock '05 pull away from a manual stock mach1 when they

both have around the same power
They have the same transmission
I believe the same gears in the rear.
but the new 05 weighs more.
I think they would be close, but i would have to give the win to the 04 mach. given equal drivers in a 1/4 mile race.

On a side note it would be nice to have to pay for regular gas instead of prem. gas

The more i see the 05 the more i like it though.
cant wait for the svt
Click to expand...

According to Edmunds.com, the Mach 1 and the '05 GT essentially weigh the same (they actually list the Mach as 19 lbs heavier).

Disclaimer: I'm not sure if either are correct. I'm just posting what I read.
 
B

bartzmach1

New Member
Sep 30, 2004
5
0
0
Sep 30, 2004
#115
  • Sep 30, 2004
  • #115
sorry i was wrong about the weight.

dont know how believeable this is
I found it on the web but the site i got it from is down
my connection isn't that fast sorry

http://www.justinbartz.org/100_1305.mov

I should hope it was a bad driver.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Sep 30, 2004
#116
  • Sep 30, 2004
  • #116
how much do the new stangs weigh? from what i have heard i think they will have trouble beating the 99-04 gts because of their weight much less a mach
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Oct 1, 2004
#117
  • Oct 1, 2004
  • #117
Modular2v said:
how much do the new stangs weigh? from what i have heard i think they will have trouble beating the 99-04 gts because of their weight much less a mach
Click to expand...

Similar weight (3520 lbs for auto 05 is what I heard) and power as a Mach (5 spd Mach is @ 3465 I think) from the reports, also much better 3 link rear, this puppy will rip outta the whole. I doubt any stock 99-04 GT could keep up with equal drivers. That being said, 05 GT and Mach seem to be a drivers race.
 

Adam2004

New Member
Mar 9, 2004
42
1
0
Oct 1, 2004
#118
  • Oct 1, 2004
  • #118
The MACH1 is slow, I'd hope the '05 GT can beat it.
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Oct 1, 2004
#119
  • Oct 1, 2004
  • #119
That's pretty vague, slow compared to what?
 
G

GNN60GT500

Founding Member
Jun 18, 2002
1,218
26
48
5 car lengths in front of you!
Oct 1, 2004
#120
  • Oct 1, 2004
  • #120
slow compared to the SR-71 Balck Bird....

Man the SR71 would so smoke a MACH1...

I feel bad for all of those MACH1 owners who could have bought a SR71...you guys got ripped off!!
 
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
Next
First Prev 6 of 8 Next Last
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
145
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
380
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
926
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
1K
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?