100 thousand club

Outlaw97GT · May 8, 2006

Cantslowdown said:
Coramprat you have cams what ones??And did you get new vavle springs?

And are those Mach 1 rims on your car?
Ive thought about how they would look on a SN95

Cantslowdown · May 8, 2006

Outlaw I have cobra R wheels...

S281 #39B · May 8, 2006

I have a 94 with 243k and still going strong(as possible pretty slow cars stock)

crazynorwegian · May 8, 2006

160k here still running stronger then ever. although the first 120 was driven by a middle age lady. I'm brining it in for the new top end in about 15 days then I'll do the tranny. I'll probably wait till it hits 200k before I change out the bottom end. and then.......supercharger? hmm I can already hear that 600hp engine

kcpruitt · May 9, 2006

96 GT -- 209,000, still runs strong only 1 small oil leak and 2nd transmission. Building another 4.6 to replace soon.

ab 281 gt · May 9, 2006

RED2001GT said:
I got 33,3xx miles on my 2002 V6 Mustang and 2,365 original miles on my 2001 Mustang GT.

Cool?? this is the 100,000 club

RED2001GT · May 9, 2006

ab 281 gt said:
Cool?? this is the 100,000 club

Yeah?

COramprat · May 9, 2006

Cantslowdown...
Comp 262ah's. No new valve springs.

Outlaw97GT...Yes...they are Mach 1 wheels. Click my garage for bigger pics.

slow96mustang · May 9, 2006

107,567, no oil leaks, compleatly new rear end, all polyuerathane bushings and mounts, new eibach springs, and agx shocks, new upr controll arms, swapped aode to t45, new clutch and flywheel, new exhaust, new carpet, and a 04 counsel. everything except the trans was replaced just cause i felt like it. the origional aode decided it didnt like the pinion angle at 4 degrees, with 27X10.5 slicks at 8 lbs of pressure, second gear didnt hold up. i go threw a quart of oil about every thousand miles, and i drive the same way i did when the car only had 57 on it a year and a half ago. dont see it leaving me any time soon either. still has stock plugs and wires also, atleast till tomorrow.

Cantslowdown · May 9, 2006

Damm thats cool to see you have cams on highmilage block and heads..

COramprat · May 9, 2006

Cantslowdown said:
Damm thats cool to see you have cams on highmilage block and heads..

Cams have been in for about 30K now...I think. I don't remember exactly. It is burning some oil...about 1/2 a quart every 2K but I don't sweat that as hard as I've been on this motor. I literally have 75+ passes at the track since November of '04.

Cantslowdown · May 9, 2006

they have much of a lope?

100 thousand club

Outlaw97GT

Member

Cantslowdown

New Member

S281 #39B

New Member

crazynorwegian

kcpruitt

New Member

ab 281 gt

New Member

RED2001GT

COramprat

...I can take it. I think.

slow96mustang

New Member

Cantslowdown

New Member

COramprat

...I can take it. I think.

Cantslowdown

New Member

Similar threads

100 thousand club

Member

New Member

New Member

New Member

New Member

...I can take it. I think.

New Member

New Member

...I can take it. I think.

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency