17x10.5" Cobra Rs, H&R SuperSports - Any Issues With Rubbing? Any Specific Offset?

[SilverStallion]

I am about to order a set of the 10.5" Cobra R replicas from Detroit Wheels and then mate a set of 315 BFG KD tires to them and I was wondering if there will be any issues considering my car is lowered with H&R Supersport Springs. Will I have to flip the quad shocks? Are there any specific offset numbers that I should be looking for? Any specific information would be greatly appreciated.

Also, if anyone has pics of this combo in the Cobra R rims, I would love to see them.

Thanks in advance.
~Darren

 

[kirkyg]

Check ebay for afs wheels they sell some rims brand new on ebay for 700-800 and sometimes you can find some to bid on and get them even cheaper.

At first i thought i had a rubbing problem but it was my exhaust pipes making contact with the bottom of my car not the tires rims. An exhaust shopped fixed that in 20 minutes and havne't had any rubbing since. You should have about an inch clearance left - right for your rims.

kirkyg

 

[GinoGT]

I've got 10.5" Bullitts with 315/35-17 BFG drag radials for the track and H&R Supersports. No rubbing, plenty of clearance from the exhaust and quad shocks. I believe the closest thing to the wheel/tire is the quad shocks, and that's still a few inches away.