• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine 1986 Idle Air Control

  • Thread starter Thread starter Rdub6
  • Start date Start date Nov 29, 2018

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,968
2,949
153
Long Island, NY
Nov 29, 2018
#1
  • Nov 29, 2018
  • #1
I’m not sure if this is on here anywhere (I’ve searched a lot) so I thought I’d share.

I had an issue with a real high start up idle of around 2000 rpm that slowly dropped to about 1200. I also had the hanging idle on shifts.

I went through the many suggestions and checklists and have had no luck. The only part I changed was the IAC to a Motorcraft unit, which made zero difference.

I finally found a thread while I was looking through 4eye, that spoke of internal diodes in the new IAC motors interfering with the IAC harness diodes of the early foxes. Apparantly the early IAC motors did not have the diode built in. It said to either cut out the diode in the harness or switch the pins in the connector (reverse the wires). This would allow the internal diode in the new IAC to do the work. I went the switch the pins route in case it didn’t work, instead of cutting up the harness.........but it worked.

She starts up perfect and the rpms drop just like they should when shifting. It felt like I was driving a different car!

If this is old news, sorry, but I had to share in case there’s someone else out there like me still looking for solutions!
 
Reactions: Spiegtastic and General karthief
You must log in or register to reply here.

Similar threads

C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
192
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
591
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
293
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Electrical 1986 Mustang GT Multifunction Switch Question
  • Willybill32
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
719
Fox 5.0 Mustang Tech Nov 22, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?