Progress Thread 1991 Foxbody K Member Swap

Boostedpimp · Oct 28, 2020

breth3 said:
Hey Guys,

I have a 90' fox with a complete Team Z K member and strange coil overs with SVE caster camber plates. I went through and greased everything and torqued everything down and I am still getting clunks on bumps. Its driving me nuts! I checked everything over at least 2 times now and still don't understand what is clunking?

I'd look at the SVE cc plates closely maybe even put the car up stands and jack up a front wheel and drop it to see if you can reproduce the clunk and locate it.

breth3 · Oct 28, 2020

Boostedpimp said:
I'd look at the SVE cc plates closely maybe even put the car up stands and jack up a front wheel and drop it to see if you can reproduce the clunk and locate it.

That's actually a really good idea. I was thinking maybe it was the CC plates as well.

Mustang5L5 · Oct 28, 2020

I would also look at the C/C plate and coil-overs themselves.

DO your springs have freeplay if the suspension drops. If the spring rates are high, an the springs short, they can actually come off the perch over big dips leading to a clunk

breth3 · Oct 28, 2020

Mustang5L5 said:
I would also look at the C/C plate and coil-overs themselves.

DO your springs have freeplay if the suspension drops. If the spring rates are high, an the springs short, they can actually come off the perch over big dips leading to a clunk

Last time I had my front end in the air, I was tightening the spring to adjust my camber more positive, there was no play or looseness in the coils. I am really leaning towards the CC plates being the issue. Good thought tho, I will check again on that soon.

Progress Thread 1991 Foxbody K Member Swap

Boostedpimp

breth3

Member

Mustang5L5

That is…until I whipped out my Bissell

breth3

Member

Similar threads

Progress Thread 1991 Foxbody K Member Swap

Boostedpimp

breth3

Member

Mustang5L5

That is…until I whipped out my Bissell

breth3

Member

Similar threads

Privacy & Transparency

Privacy & Transparency