• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

1994 5.0 Hanging Rpm

  • Thread starter Thread starter Kfh660r
  • Start date Start date Apr 20, 2017
K

Kfh660r

New Member
Apr 20, 2017
1
0
1
Apr 20, 2017
#1
  • Apr 20, 2017
  • #1
Hi I'm new to forum, I have a issue that has been talked about alot but still stumped. I have a 1994 gt 5.0, I recently put a e303 cam in, trick flo upper and lower intake, 75mm bbk throttle body, and deleted smog pump. The issue is when the car is cold everything works perfect, once it reaches normal temperature it has a problem idling down during shifts the rpms just hang there for about 3 seconds then finally falls. I replaced the iac but nothing, if I unhook the iac the car runs like it should, but once I shut if off I have to hook the iac back up to start it. I've also cleaned the mass air but haven't replaced it yet. I read that there is no way to adjust the tps on the 94s so I'm at a loss here. Also checked all vacuum lines and made sure there was no leaks in intake gaskets.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 20, 2017
#2
  • Apr 20, 2017
  • #2
You guys with idle/stall problems could save a lot of time chasing your tails if you would go through the Surging Idle Checklist. Over 50 different people contributed information to it. The first two posts have all the fixes, and steps through the how to find and fix your idle problems without spending a lot of time and money. It includes how to dump the computer codes quickly and simply as one of the first steps. I continue to update it as more people post fixes or ask questions. You can post questions to that sticky and have your name and idle problem recognized. The guys with original problems and fixes get their posts added to the main fix.

It's free, I don't get anything for the use of it except knowing I helped a fellow Mustang enthusiast with his car. At last check, it had more than 200,000 hits, which indicates it does help fix idle problems quickly and inexpensively.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,255
17,939
224
Massachusetts
Apr 20, 2017
#3
  • Apr 20, 2017
  • #3
Codes?

Perform idle reset procedure?
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
645
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
395
Fox 5.0 Mustang Tech May 11, 2026
keel
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
750
Fox 5.0 Mustang Tech Friday at 5:04 PM
alutwon
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
845
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
R
Engine Fox body doesn’t run hot until I start driving
  • Rose5oh
  • Mar 17, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Jun 7, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?