Hello I was troubleshooting if my low pressure switch on my AC was bad by taking a small piece of tin foil and putting it in the 2 ports of the connector to the wiring harness that goes in the low pressure switch. I did this to obviously complete the circuit between them so my compressor would come on.
Well.. because I used Tin foil to connect the 2 wires, the tin foil accidentally touched the frame and it arked while the engine was running Now the ac compressor isn’t on it doesn’t come on at all anymore —-
HELP
Well.. because I used Tin foil to connect the 2 wires, the tin foil accidentally touched the frame and it arked while the engine was running Now the ac compressor isn’t on it doesn’t come on at all anymore —-
HELP