1st Time @ Dyno

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 14, 2006

#1

• Apr 14, 2006

• #1

Well this was my first time @ the dyno. Whatcha think? I will go to the track on the 22nd for my first time in 4 yrs.

Red was final run and best.

 

Attachments

• picture0014jg.th.webp

  2.8 KB · Views: 154

E

emagdnim

Active Member

Feb 5, 2003

391

15

28

Apr 14, 2006

#2

• Apr 14, 2006

• #2

what are you mods?

 

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 14, 2006

#3

• Apr 14, 2006

• #3

Sorry I forgot to list that. I have MAC CAI, Magnaflow Cat Back, H-Pipe(?), Pullies(-alt), just tuned it up with FRPP Wires, MSD Cap & Rotor, Fuel Filter. This is my "baseline" before I install my new motor. I also hope to run next Saturday, for a baseline run.

 

E

emagdnim

Active Member

Feb 5, 2003

391

15

28

Apr 14, 2006

#4

• Apr 14, 2006

• #4

Not bad for a basically stock engine man.

 

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 14, 2006

#5

• Apr 14, 2006

• #5

Thanks, I don't know what to expect in the 1/4 mile. I'm pretty sure it will run 4-5 tenths slower than @ sea level. I'm hoping for a 14.7. What do you think fair estimate?

 

Aliate X

Member

May 9, 2005

602

1

18

Rockland NY

Apr 14, 2006

#6

• Apr 14, 2006

• #6

The pullies help a lot. I ran 14.4@95 w/ 2.0 60ft with less power than you. Just above sea level though.

 

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 14, 2006

#7

• Apr 14, 2006

• #7

After I nstall the 331 I'm hoping for 325/375 Is that to much of an expectation?

 

M

MarSaleenMustan

Founding Member

Apr 5, 2002

208

0

0

San Bernardino California

Apr 14, 2006

#8

• Apr 14, 2006

• #8

Aliate X said:

The pullies help a lot. I ran 14.4@95 w/ 2.0 60ft with less power than you. Just above sea level though.

Click to expand...

I ran a 14.0 with a 2.0 with the same mods plus 3:73s... 13.7 with slicks and a 1.88 60'
this was at about 1K feet above sea level.

 

E

emagdnim

Active Member

Feb 5, 2003

391

15

28

Apr 14, 2006

#9

• Apr 14, 2006

• #9

idaho_88 said:

After I nstall the 331 I'm hoping for 325/375 Is that to much of an expectation?

Click to expand...

What heads , cam , and intake with that 331? 325/375 will be a easy number to hit if you use aftermarket heads and intake. Dont forget your gonna need to upgrade your injectors as well.

 

CRASH7772

Member

Apr 27, 2003

401

1

16

NH

Apr 14, 2006

#10

• Apr 14, 2006

• #10

You still SD? You pulled about the same numbers as I did with about the same mods. My car would run low 14's with 2.73's close to sea level.

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Apr 14, 2006

#11

• Apr 14, 2006

• #11

my dyno last week is very similar i run a 14.2-14.4 at the track lets see what you do....

 

Attachments

• mustangdyno.webp

  38.9 KB · Views: 123

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 15, 2006

#12

• Apr 15, 2006

• #12

Then I'll shoot for 14.4-14.7. I think I can pull that off with some street tires. The race next weekend is called Saturday Night Fever. Basically getting the rednecks with rice off the streets/boonies. So lots of ricers will be talking the talk and getting towed home.

 

I

idaho_88

New Member

Dec 1, 2005

15

0

0

Boise,Idaho

Apr 15, 2006

#13

• Apr 15, 2006

• #13

Emagdnim- The HCI will be Trickflow Track Heat w/ Stage 2 Cam. My injectors will be 30/lb'ders. I am stoked about the engine and should be here in 2-3 weeks. I have waited for this since June '04 when I left for training to go to Iraq.

Crash- Yeah the car is still SD and ran strong today. Its great seeing the needle pointing straight down on an 85mph speedo. Won't be after new combo comes.

Bill 302- Your car put up some decent numbers also. I looked at the shop owners 95 cobra and his numbers were identical to your almost exactly. His mods were CAI, exhaust, superchip.