OK guys. I put a deposit on a '88 2.3L notch lastnight, I go pick it up tonight.
I have done a tiny bit of work with the 5.0l stangs, but need to know some stuff about the 2.3l so I can make sure things are good before I drive it home. I searched and could not find get a search to work and find this info..
#1 - Where is the SPOUT connector? I need to pull it and check base timing before I drive to far.
#2 - Is the 2.3L base timing the same as a 5.0l? 10*BTDC? I thought I saw that, but lost the thread.
#3 - Will driving the car home 20min with clogged CAT cause any serious damage? I test drove it a little yesterday (maybe ran 10min) and the cat was smoking sounded like burning up.. I know it is clogged good. MAyeb take the trip home in stages and let it cool off a bit each time?
I have done a tiny bit of work with the 5.0l stangs, but need to know some stuff about the 2.3l so I can make sure things are good before I drive it home. I searched and could not find get a search to work and find this info..
#1 - Where is the SPOUT connector? I need to pull it and check base timing before I drive to far.
#2 - Is the 2.3L base timing the same as a 5.0l? 10*BTDC? I thought I saw that, but lost the thread.
#3 - Will driving the car home 20min with clogged CAT cause any serious damage? I test drove it a little yesterday (maybe ran 10min) and the cat was smoking sounded like burning up.. I know it is clogged good. MAyeb take the trip home in stages and let it cool off a bit each time?