• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2 suspension questions...

  • Thread starter Thread starter stangliter04
  • Start date Start date Mar 30, 2006

stangliter04

New Member
Apr 4, 2005
185
0
0
Port St John, Florida
Mar 30, 2006
#1
  • Mar 30, 2006
  • #1
First after I install all the suspension mods in my sig. how long should I wait to get an alignment? is there a settle period for the springs? also can I use the stock Spring Isolators on the new springs? thanks for the help :SNSign:
 
I

IH8RICE2

New Member
Aug 18, 2005
36
0
0
Peachtree City
Mar 30, 2006
#2
  • Mar 30, 2006
  • #2
You can wait a few days if you'd like before getting an alignment, bc yes, there is a setting period. But i don't recommend driving your car much with your caster&camber so off. Your springs will probably get a 1/4-1/2 inch lower over the next few days. There is no problem using the stock isolators, I did anyways.
 

BlueRuckus

New Member
Jun 30, 2005
204
1
0
Miami, FL
Mar 30, 2006
#3
  • Mar 30, 2006
  • #3
I have heard recommended about a week or so. I believe some people on this forum have noticed some minor settling to continue even after 5 days.

Yes, you can use your stock isolators as long as they are in good shape. If they show a lot of wear then you may want to get new ones.

Good luck!
 

MineralG2k2GT

New Member
Feb 9, 2003
451
0
0
Lowell, MA
Mar 30, 2006
#4
  • Mar 30, 2006
  • #4
it all depends on how much you are going to drive your car. I wouldnt recomend waiting tooo long to get the alignment

also, just get new isolators, they are 15 bucks from maximum motorsports
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Mar 30, 2006
#5
  • Mar 30, 2006
  • #5
Within 150miles, or 2-3 days which ever comes first.
 

XtorT'r

New Member
Jun 11, 2003
381
0
0
Minnesota, YAAA
Mar 30, 2006
#6
  • Mar 30, 2006
  • #6
I waited a couple days, best allignment I have ever had in any car i have ever owned. Must have been the C\C plates
 

steveb24

New Member
Nov 28, 2005
555
0
0
wilmington, DE
Mar 30, 2006
#7
  • Mar 30, 2006
  • #7
had mine aligned with no aftermarket c/c plates 10 miles after install..couldnt be happier..everything aligned perfectly
 
R

Red2000GT

Founding Member
Sep 10, 2000
2,450
0
46
Regina,Sask.Canada
Mar 30, 2006
#8
  • Mar 30, 2006
  • #8
It can actually take up to 4 weeks for springs to fully settle,depending on how stiff they are. Regular lowering springs:1-2 weeks road race type springs:3-4 weeks.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Mar 30, 2006
#9
  • Mar 30, 2006
  • #9
Just go to a shop that warrantys their alignment for 6months or more. get the alignment and have it rechecked in 5 months
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Mar 30, 2006
#10
  • Mar 30, 2006
  • #10
The answers to your questions:

Depends...

Depends...

Yes...

1) You'll need an alignment AFTER your springs settle.

2) Not all springs settle. H&R's don't settle. Hence you can get an alignment right away but wait a few days to be sure.

3) Use the stock isolators if they aren't trashed. I bought new urethane isolators when I put in my suspension. Some remove them completely...
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
Mar 31, 2006
#11
  • Mar 31, 2006
  • #11
definately hit up a place that has a warrentied alignment. Sears has a 6mo 6k mile warrenty. go in right after then go in a little later and have it warrentied. say the steering wheel isnt straight or it pulls. as long as you are in the warrenty period they will do it. just dont abuse it, cause then they get really pissed. we still have customers from the 80s that have a lifetime alignment on their cars, they usually come in every 3 months to have it checked.
 

stangliter04

New Member
Apr 4, 2005
185
0
0
Port St John, Florida
Mar 31, 2006
#12
  • Mar 31, 2006
  • #12
thanks for all the good info :SNSign:
 
You must log in or register to reply here.

Similar threads

Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
927
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
425
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
Suspension Setting Front Alignment - Do I care about the rear's thrust angle?
  • dan50
  • Nov 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
420
Fox 5.0 Mustang Tech Nov 28, 2025
Kid wita 5oh
S
347 with Vortech V2 and Holley quick fuel, AFR Renegades a tremec tko 600 advice for newbie pls
  • Schargedfox
  • Jul 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
728
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 3, 2026
Schargedfox
S
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
277
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?