• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

2000 GT motor noisy in the mornings for brief period.

  • Thread starter Thread starter jayrw
  • Start date Start date Oct 1, 2007

jayrw

Member
Sep 2, 2007
156
0
17
Clovis, California.
Oct 1, 2007
#1
  • Oct 1, 2007
  • #1
When I first start driving my car in the morning I can hear what sounds like lifters or something making a lot of racket whenever I go over around 2,000 rpms , the weird part is this noise stops after about 2-3 minutes of driving ..is this possibly an oil flow problem or any other ideas? The car has 60,000 miles and is all stock. Thanks!
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Oct 1, 2007
#2
  • Oct 1, 2007
  • #2
what kind/weight oil are you running?
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 1, 2007
#3
  • Oct 1, 2007
  • #3
Is it a ticking or a rattling sound?
 

jayrw

Member
Sep 2, 2007
156
0
17
Clovis, California.
Oct 1, 2007
#4
  • Oct 1, 2007
  • #4
thomas91169 said:
what kind/weight oil are you running?
Click to expand...

Ive only had the car for a month and havent had to add any oil to it yet (just checked it yesterday), so im not sure what its currently using. I bought the car from Carmax. Should I try having the oil changed with a specific kind/weight?

It doesnt really sound like ticking or pinging ... I suppose rattling is more accurate, it sounds sort of like a rapid hammering sound.
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 1, 2007
#5
  • Oct 1, 2007
  • #5
jayrw said:
It doesnt really sound like ticking or pinging ... I suppose rattling is more accurate, it sounds sort of like a rapid hammering sound.
Click to expand...

OK hammering is not a good sound. Especially if it's clearly loud. I would not drive the car until you can have it diagnosed. You may have a spun bearing, rod knock, or something serious. Unplug one COP at a time (part that goes over the spark plug). If the noise goes away, thats the cylinder causing problems. You should also check the engine oil pressure and do a leak down/compression test. If you oil pressure is low or erratic, you most likely have serious engine damage. A leak down/compression test will tell you how healthy the engine is. Just DO NOT drive that car until you or a mechanic have diagnosed the problem.
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 1, 2007
#6
  • Oct 1, 2007
  • #6
Wow, I just noticed you are in Clovis. Which part are you from? I might be able to help you out.
 

jayrw

Member
Sep 2, 2007
156
0
17
Clovis, California.
Oct 1, 2007
#7
  • Oct 1, 2007
  • #7
the98stang said:
Wow, I just noticed you are in Clovis. Which part are you from? I might be able to help you out.
Click to expand...

Ah thats cool do you work on Mustangs?, Im near Barstow & Willow , I have a 3 year warranty on the car which supposedly covers everything inside and out on the motor (minus the Clutch), Perhaps I should just take it to Ford and have them check it out? My default 30 day warranty with Carmax just ended so now with the extended warranty I can take it anywhere (i just have to pay $50,copay).

This hammering sound might be a bit of an exaggerated description but its the closest sound i can think of.. The car runs good and has a pretty good amount of power but your right I definitely want it checked out especially after reading your posts..
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 1, 2007
#8
  • Oct 1, 2007
  • #8
jayrw said:
Ah thats cool do you work on Mustangs?, Im near Barstow & Willow , I have a 3 year warranty on the car which supposedly covers everything inside and out on the motor (minus the Clutch), Perhaps I should just take it to Ford and have them check it out? My default 30 day warranty with Carmax just ended so now with the extended warranty I can take it anywhere (i just have to pay $50,copay).

This hammering sound might be a bit of an exaggerated description but its the closest sound i can think of.. The car runs good and has a pretty good amount of power but your right I definitely want it checked out especially after reading your posts..
Click to expand...

Yea you live like 10min from my house lol....I live near Willow/Copper. Anyway, you might want to take it to the dealership and have them scope it out. For $50 you can't really go wrong.
 

jeffnoel

Founding Member
Aug 31, 2002
1,638
5
37
Clovis, CA
Oct 2, 2007
#9
  • Oct 2, 2007
  • #9
The sound is typical with higher mile mod motors, my wifes 02 does it in the AM but only for about 30 sec, I'm near Clovis and Alluvial. You can take it to Ford but they probably won't do anything but take your $50.
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Oct 2, 2007
#10
  • Oct 2, 2007
  • #10
Honestly if the car has good compression the noise doesn't really matter.
 

MyStangGT

Member
Jun 21, 2003
77
1
8
Oct 2, 2007
#11
  • Oct 2, 2007
  • #11
jeffnoel said:
The sound is typical with higher mile mod motors, my wifes 02 does it in the AM but only for about 30 sec, I'm near Clovis and Alluvial. You can take it to Ford but they probably won't do anything but take your $50.
Click to expand...

My 99 does this too but his discription is different than ours. Our cars have timing chain/guide wear.

Dunno what his problem is but if I were him I would change the oil and filter and see if it goes away. Use only the Motorcraft filters and I use the Motorcraft synthetic blend motor oil also.
 

jeffnoel

Founding Member
Aug 31, 2002
1,638
5
37
Clovis, CA
Oct 2, 2007
#12
  • Oct 2, 2007
  • #12
He may be describing it different but I bet it's the same rattle I get when the engines cold in the AM it's the lifters it's not my timing chain.
 

jayrw

Member
Sep 2, 2007
156
0
17
Clovis, California.
Oct 3, 2007
#13
  • Oct 3, 2007
  • #13
MyStangGT said:
Dunno what his problem is but if I were him I would change the oil and filter and see if it goes away. Use only the Motorcraft filters and I use the Motorcraft synthetic blend motor oil also.
Click to expand...

Hm ya that's what I was thinking about doing and go from there , I doubt carmax used a motorcraft filter or oil, since the noise goes away after a few minutes I'm guessing its not something to serious (Hopefully). Ill report back once I change the oil/filter.

Thanks for the replies.
 

R.J.

Member
Aug 20, 2003
813
0
16
Warwick, Rhode Island
Oct 4, 2007
#14
  • Oct 4, 2007
  • #14
Mine did the same when I used Mobil Clean 5000 5w-20 (conventional). Then I switched to Mobil 1 Syn 5w-20 and the engine does not make a sound, cold or hot.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Oct 6, 2007
#15
  • Oct 6, 2007
  • #15
At least change the oil. WHo knows what is in there

5W-30 and a motorcraft FL-820S (NO FRAM!!)
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Oct 6, 2007
#16
  • Oct 6, 2007
  • #16
Mine does the same on cold start ups for 2-3 min. Goes away then. Im running motorcraft filter and mobil 1 5w30
 

mransr

Founding Member
Nov 3, 2000
1,188
36
98
Riverside, SoCal
Oct 6, 2007
#17
  • Oct 6, 2007
  • #17
I did an "old school" flush on mine, I ran a quart of ATF in the engine for a few minutes at the last oil change...and that, along with switching to Castrol semi-synthetic, seems to have gotten rid of my noisy start-ups
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Oct 6, 2007
#18
  • Oct 6, 2007
  • #18
BlownStangGT said:
Mine does the same on cold start ups for 2-3 min. Goes away then. Im running motorcraft filter and mobil 1 5w30
Click to expand...

Same here. Goes away really quickly. I just baby it for the first few mins.
 
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
314
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
145
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
D
What's it Worth? 2006 Mustang GT Convertable
  • doc0075579
  • Mar 2, 2026
  • What is it Worth?!?!?
Replies
0
Views
235
What is it Worth?!?!? Mar 2, 2026
doc0075579
D
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
316
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?