2000 seats in a 1970, will they fit?

Tom Wagner · Jan 9, 2007

Hi,
Do seats from a 2000 GT fit in a 1970 Mustang? The seat from the 2000 has a power track and I would like to use it.
Thanks,
Tom

10secgoal · Jan 9, 2007

Anything can fit. Just depends on how much time and money you are willing to spend. I would measure you current hole spacing in the floor boards and go from there.

dodgestang · Jan 9, 2007

They sit too high with the power tracks. If you lose the power tracks and bolt the stock 70 seat tracks to the bottom of the seat the seats mount easily enough.

If you want to use the power tracks you will need to lower the seat riser...unless you are a REALLY short dude.

68GT500KR_Vert · Jan 9, 2007

I'm doing the exact same thing

But I'm cutting my seat risers where the power tracks go, creating a little frame to keep the strength, then boxing it with sheet metal, and it will only raise them up a little. Plus the seat risers are angled back, the 2000 seat tracks would need a flat surface. I'm 6' 2" so i need the height. It's not a big deal.

xoxbxfx · Jan 9, 2007

68GT500KR_Vert said:
But I'm cutting my seat risers where the power tracks go, creating a little frame to keep the strength, then boxing it with sheet metal, and it will only raise them up a little. Plus the seat risers are angled back, the 2000 seat tracks would need a flat surface. I'm 6' 2" so i need the height. It's not a big deal.

just like you are planning is what I did... I have a simple 1" box frame that mounts UNDER the car with carriage bolts to that bolt into the stock seat tracks of the 94+ seats. I put new pans in and didnt want seat risers due to the height issues. The brace being under the floor has its own support and uses the floorpan as reinforcement. I think its plenty strong. The seats are not going anywhere.

iskwezm · Jan 9, 2007

i used 65 seat tracks on 00' seats and was quick and easy

Tom Wagner · Jan 10, 2007

Thanks for the info

Booksix · Jun 16, 2007

Anyone got pics? I'm looking for seats for a 68 coupe. I kind of want power seats (i always feel low with regular seats - in most cars - and I like to have a lot of adjust-ability in all directions not to mention lumbar). I know I'll probably need to mod the floor pan to get them in at the right height...

But beside that, I'm looking for a newer seat that will look nice. I'm leaning toward 05-07 seats now. The only thing I wish they had was the belt-catch so the belts didn't always end up way back by the pillar and out of reach...

xoxbxfx · Jun 17, 2007

Booksix said:
Anyone got pics? I'm looking for seats for a 68 coupe. I kind of want power seats (i always feel low with regular seats - in most cars - and I like to have a lot of adjust-ability in all directions not to mention lumbar). I know I'll probably need to mod the floor pan to get them in at the right height...

But beside that, I'm looking for a newer seat that will look nice. I'm leaning toward 05-07 seats now. The only thing I wish they had was the belt-catch so the belts didn't always end up way back by the pillar and out of reach...

I ripped out the seat pans and it made a lot more room. You can sorta see the seats in my 66

View attachment 381090

I will get more pics tomorrow..its raining outside

Booksix · Jun 17, 2007

Thanks! Looks like it's gonna be a sweet ride... and yeah, I'd love to see some more pics! Do you have any idea how much taller the power seats would have been over stock buckets had you not chopped the floor?

xoxbxfx · Jun 17, 2007

Booksix said:
Thanks! Looks like it's gonna be a sweet ride... and yeah, I'd love to see some more pics! Do you have any idea how much taller the power seats would have been over stock buckets had you not chopped the floor?

Well, the stock seat brackets sorta mount goofy on the floor of a new mustang. I would say the distance between the bottom of the seat and the floor would be something like 3-4"...so Im gonna say a good 2" taller...then add a seat pan at 2-3". Using power tracks, you are looking at something like 5" taller. I have seen these seats on other cars with the seat pans in, and it looks like they are going to touch the roof, and thats with the stock tracks. Id pull the seat pans out

Booksix · Jun 17, 2007

hmm, ok... maybe I'll stick with a manual seat... the car I'm working on is amazing clean and straight (68 j-code coupe) and I don't want to hack up the floor... any other possible options for power seats?

2000 seats in a 1970, will they fit?

Tom Wagner

Member

10secgoal

Active Member

dodgestang

Active Member

68GT500KR_Vert

xoxbxfx

iskwezm

Tom Wagner

Member

Booksix

New Member

xoxbxfx

Booksix

New Member

xoxbxfx

Booksix

New Member

Similar threads

2000 seats in a 1970, will they fit?

Member

Active Member

Active Member

Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency