Roush 2002 Saleen SC Throws a Service Engine Light?

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 19, 2005

#1

• Jun 19, 2005

• #1

The only mod that I have to the car is a bassani X-pipe with high flow cats. I have put about 200 miles on the car since I installed the pipe and it's been great. Last night I took the car out after it had been sitting, and drove about five miles before the Service Engine Soon light came on. Could it be from the pipe?

 

Saleen Mike

Founding Member

Oct 17, 2002

824

0

0

Jun 19, 2005

#2

• Jun 19, 2005

• #2

Yes, that is exactly what has turned on the SES light.

The shop that did the install should be able to help you with installing some MILs. They should run you about $75.

 

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 19, 2005

#3

• Jun 19, 2005

• #3

I installed it myself so how would I got about installing the MIL's? Can a ford dealership install those?

 

Acheron315

New Member

Oct 23, 2003

235

0

0

Charleston, SC

Jun 19, 2005

#4

• Jun 19, 2005

• #4

You just need to buy something like this: http://www.dallasmustang.com/index.mvc?p=9074

They just plug up between the rear two O2 sensors and the body harness. If you installed the pipe, this will be a no-brainer.

If you are handy with electronics you can build your own, there are links to plans on this site if you search.

 

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 20, 2005

#5

• Jun 20, 2005

• #5

I ordered them. Thank you very much

 

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 25, 2005

#6

• Jun 25, 2005

• #6

Mil's fixed the problem! Thanks a lot guys.

 

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 26, 2005

#7

• Jun 26, 2005

• #7

Engine light is back on!?

 

S

SGOODRIC50

Founding Member

Sep 12, 2002

130

0

0

Maine

Jun 30, 2005

#8

• Jun 30, 2005

• #8

any reason why?

 

W

whosdady

New Member

Dec 6, 2004

107

0

0

Jun 30, 2005

#9

• Jun 30, 2005

• #9

I didn't know the high flow cats caused the ses to appear. I would consider the install and the chance of running lean? If it was an x pipe without cats than it would be a no brainer and that would be the problem.

 

Acheron315

New Member

Oct 23, 2003

235

0

0

Charleston, SC

Jun 30, 2005

#10

• Jun 30, 2005

• #10

I dont know why it would turn on from the MILs again. You know autozone will read your SES light for free. I would suggest trying them. It could be something as simple as the gas cap not sealing all the way. Hopefully they will help you narrow down the problem.