• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

2005 Mustang release rumours in Oz

  • Thread starter Thread starter aussieLS1
  • Start date Start date Jul 1, 2004
  • 1
  • 2
Next
1 of 2 Next Last
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 1, 2004
#1
  • Jul 1, 2004
  • #1
Hi Folks,
This is my first post in your forums, G'day!
There is speculation 'down unda' that Ford will release the 2005 Mustang here, although Ford Australia are being vague about the prosect. This car is an absolute doll and would sell here if the price was right. I've searched the net and your forum for the ' 2005 Mustang Australia ' strings but no luck. Have you guys heard any whispers?
Cheers,
Phil
 

brandon_lawson7

New Member
May 11, 2004
239
0
0
Morehead, KY
Jul 1, 2004
#2
  • Jul 1, 2004
  • #2
Welcome aboard dude! I haven't heard anything myself but if it was brought over there, then it could be like summer of 05' or in 06' before that happens. Ford would want to make sure everythings OK with the Mustang here before they'd start shipping them there. Enjoy the website!
 

Cook89Notch

Founding Member
Jan 17, 2002
3,201
8
59
Close to Lansing, MI.
Jul 1, 2004
#3
  • Jul 1, 2004
  • #3
I don't know about that, but I sure wish we could get some of the bad-azz cars you all have over there! Such as the Falcon!

Matt.
 

Reimann

Puss > me
Jun 16, 2003
2
3
59
Wherever I May Roam
Jul 1, 2004
#4
  • Jul 1, 2004
  • #4
Don't know if you guys are getting the '05 or not, if you do I hope Ford doesn't stick any fog lights in the front bumper, beside the front license plate, like they did with the current model. That was just ugly!
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 1, 2004
#5
  • Jul 1, 2004
  • #5
Quote "The Falcon XR6 and XR8 are the swaggering road burners of the family. For a base price of U.S. $37,859, an XR8 driver sits behind Ford’s 5.4-liter DOHC 32-valve V-8, outracing a kookaburra’s call with 349 horsepower and 369 pound-feet of steamship torque. Ford calls the engine the “Boss 260,” but to Australians it’s a hallowed “vee-bloody-eight.”

Well, I'm from the other side of the fence. I have a ( GM ) Holden HSV. HSV in Oz are as Callaway is in the U.S.
Your Chev 5.7 litre is under the bonnet and an amazing engine it is. Aussie tuners are always tinkering. A guy here has planned a 2000hp version. ( with a little plumbing )

link here
http://www.are.com.au/Big HP/Craigs A-W Com.htm

Anyways, I digress. Apart from some local muscle cars and what we can do with them, Aussies generally love American styling. For me the Mustang styling lost the plot for years and then evolved again.

I hope the export of the 2005 Mustang happens.

As 65 Mustang enthustiast thanks for your forum and I have plenty here to search through.

Cheers,
Phil
 
P

pony542

New Member
Jun 3, 2004
38
0
0
Jul 1, 2004
#6
  • Jul 1, 2004
  • #6
Bigger question than just OZ .... has anyone heard if they are planning a RHD (right hand drive) version of the Mustang? If your going down under (or several other places) it would seam much better to design a factory RHD into the program, rather than the post production mods it takes (usually poorer quality than the production factory). Guess you could try to sell the LHD version .... but dont think that would play.
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 1, 2004
#7
  • Jul 1, 2004
  • #7
yep your right pony542,
rhd has to be part of production, geometry considerations as well
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 1, 2004
#8
  • Jul 1, 2004
  • #8
.
 

itsgreat2bme

New Member
Sep 12, 2003
288
0
0
Regina
Jul 1, 2004
#9
  • Jul 1, 2004
  • #9
Aww, I miss Oz! I decided that I would save my money for my 05 and now I realize that I had promised myself I'd visit Aussie again somebody just give me a million dollars and help a gal out. (and if you don't have a million bucks, just buy me an 05, or give me a free trip to Australia again )
Thanks in advance . . . .
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
santa barbara, CA
Jul 3, 2004
#10
  • Jul 3, 2004
  • #10
id like a fair trade, they get the stang downunder while we get FPV in the states.
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 15, 2004
#11
  • Jul 15, 2004
  • #11
top end speeds for the 05 are still speculation here, any one done a 150mph run. the myth spreads but I have reason to doubt it!
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Jul 15, 2004
#12
  • Jul 15, 2004
  • #12
aussieLS1 said:
top end speeds for the 05 are still speculation here, any one done a 150mph run. the myth spreads but I have reason to doubt it!
Click to expand...

I did close to 140 mph in my 260 hp GT (still pulling pretty good but I pussed and let off the gas), and that was just with a catback exhaust so with the new 300 hp motor I'd say 150 is definitly possible, but I'm willing to bet there will be some sort of governor like the Cobras, I think they're govered at 155. I'm sure there are ways around it though.
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 15, 2004
#13
  • Jul 15, 2004
  • #13
CatmanJJ, I'm running a 5.7l ls1 HSV with cat back, cold air, 4-2-1 headers. I cant make 150 mph ( 250 kph ) 6 speed hollinger box, she runs out of steam at 245 kph. Too much air pushing her back. Would love to know how you do it.
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Jul 15, 2004
#14
  • Jul 15, 2004
  • #14
aussieLS1 said:
CatmanJJ, I'm running a 5.7l ls1 HSV with cat back, cold air, 4-2-1 headers. I cant make 150 mph ( 250 kph ) 6 speed hollinger box, she runs out of steam at 245 kph. Too much air pushing her back. Would love to know how you do it.
Click to expand...

Well I was up to 140 not 150. U sure your car doesn't have a governor? I thought for sure you'd be able to go 150+ with the LS1 since they pull a hell of a lot harder then my SOHC 4.6 ever did.
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 15, 2004
#15
  • Jul 15, 2004
  • #15
CatmanJJ, The only governor is fuel cut off at 6,000 rpm,
Miss your gear change, hit the limiter and bang.. backfire..
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 15, 2004
#16
  • Jul 15, 2004
  • #16
the Ls1's do run hard, the trick is getting to the 150mph mark.
hence my question. I love the 2005 stang and if Ford do the right thing by the Aussie market I will be waiting there with a cheque.
bottom line though, is I doubt any production muscle car can crack the 150 mph barrier.

check the link here:
http://homepages.ihug.com.au/~phillo/clubsport150k.mov
 
G

G0NEn60

New Member
Jul 10, 2004
45
0
0
Navarre FL
Jul 16, 2004
#17
  • Jul 16, 2004
  • #17
It shouldn't be too hard to hit 150 in that car or at least close. My bone stock SRT-4 can hit 153. The (stock)SRT-4 is a little faster than an 03 GT with basic bolt-ons. At a minimum I think an 03 GT could ring out 145. The 05 I expect to have similar performance as the SRT-4 so I'd expect over 150.
LS-1's are monsters in the top end, so maybe its something in the air down there. A bone-stock LS-1 C5 can do in the 170's. I know the Monaro is a little heavier but 150 should be cake. When you did this top speed run, where you going up a mountain on a windy day?
 
A

aussieLS1

New Member
Jul 1, 2004
11
0
0
Melbourne Australia
Jul 16, 2004
#18
  • Jul 16, 2004
  • #18
G0NEn60, I can only post the facts with a video clip to confirm.
Flat run in the outback desert. The car is an HSV Clubsport., very slippery but with body kit and rear wing designed to keep the the car hugging the ground. The shift from 5th to 6th near 250kph / redline - fuel cutoff ,kills the attempt
 
G

G0NEn60

New Member
Jul 10, 2004
45
0
0
Navarre FL
Jul 16, 2004
#19
  • Jul 16, 2004
  • #19
I'm not doubting you, or tryin to be an ass. Over here though 150 isn't too tough, but if you have some aerodynamic mods that could very well be the culprit. Do you have any pics? Also, gearing plays a big roll, what transmission is it. I'm not to familiar with V8's so if you know what other cars that tranny is in, it might help.
 

blazinsteed

New Member
Dec 27, 2002
654
0
0
florida
Jul 16, 2004
#20
  • Jul 16, 2004
  • #20
i hit 143 in my gt and there are guys that bounced the revlimiter in the mach which i believe is 150mph
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Install Daytona Sensors CD-1 Ignition Mustang Fox SN95
  • revhead347
  • Sep 21, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 11, 2026
AeroCoupe
Progress Thread Thanks Stangnet - A Big Help
  • markinms
  • Mar 25, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 26, 2018
85_SS_302_Coupe
Cdc Customizable Door Sill Plates Now Available For 2005-13 Mustangs!
  • CDC Jake
  • Jun 15, 2012
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
2K
2005 - 2014 S-197 Mustang -General/Talk- Jun 19, 2012
beviking
Cdc Customizable Door Sill Plates Now Available For 2005-13 Mustangs!
  • CDC Jake
  • Jun 15, 2012
  • Vendor Sponsor Forums
Replies
0
Views
2K
Vendor Sponsor Forums Jun 15, 2012
CDC Jake
NewTakeOff releases OEM leather for the 2005-2010 Ford Mustang
  • MRaburn
  • Sep 27, 2009
  • StangNet Site News
Replies
0
Views
1K
StangNet Site News Sep 27, 2009
MRaburn
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?