250 rwhp

J

jghood13

New Member

Oct 2, 2003

160

0

0

NY

Nov 29, 2004

#1

• Nov 29, 2004

• #1

what will it take to reach this mark.

I have mac cold air,asp pullies,off road h-pipe,flowmasters,c&l 73mm,aluminum drive shaft

 

95snoozer

Active Member

Dec 14, 2002

2,572

1

48

RCR

Nov 29, 2004

#2

• Nov 29, 2004

• #2

long tubes performer intake and TB

sell your shorty H and you might try a different muffler.

adjustable fpr and some timing.

why stop at 250?

 

J

jghood13

New Member

Oct 2, 2003

160

0

0

NY

Nov 29, 2004

#3

• Nov 29, 2004

• #3

how about full mac exsaust
performer 5.0
65 tb
but injecotrs maf??
my goal is like your though the 250 is based off you posted 247 hp I want to achieve what I can power wise the cut what I have too to run 12s or real close

 

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Nov 29, 2004

#4

• Nov 29, 2004

• #4

I have all the mods listed in my sig and people are estimating me at anywhere from 230-250rwhp.

 

Joes95GT

New Member

Jan 23, 2003

3,132

1

0

Delaware

Nov 29, 2004

#5

• Nov 29, 2004

• #5

In no particular order...

Intake Manifold
Headers (shorties are fine)
Prochamber
Catback Exhaust (a good one - no BLOWmasters!)
Pulleys
CAI
Pro-M 80mm
Throttle body (might not be necessary).
Good gas and an adjustable regulator.

With a 3.73 and slicks, you can get there (12's) driving the piss out of the car @ ~3400 pounds.

Joe

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Nov 29, 2004

#6

• Nov 29, 2004

• #6

I made 250rwhp and 292rwtq with all the mods in the sig minus the heads and cam.

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Nov 29, 2004

#7

• Nov 29, 2004

• #7

With my car I made 272/316 with a set of stock heads (GT-40 valves) stock cam, stock bottem end, Cobra intake, 65mm TB, 75mm MAF, CAI, pulleys, LTs, prochamber, and a catback...

This also allowed me to run 12.5s on slicks and 12.9 on street tires... I would say in a slightly heavier SN-95 it could go high 12s on tires!

 

J

jghood13

New Member

Oct 2, 2003

160

0

0

NY

Nov 29, 2004

#8

• Nov 29, 2004

• #8

How much did you FOX weight to go thoughd times?

Gt40 ? or Performer 5.0 ?
fsm 65mm tb
proM 75mm mas air ? Gms,c&l
mac cai
asp pulleys
mac LTs
mac pro chamber
mac catback

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Nov 29, 2004

#9

• Nov 29, 2004

• #9

It weighs about 3150-3200 on each pass, and the suspension is also untouched (sway bars gone)! The mods you just listed are exactly what I have, minus the cobra intake!

 

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Nov 29, 2004

#10

• Nov 29, 2004

• #10

25thmustang said:

It weighs about 3150-3200 on each pass, and the suspension is also untouched (sway bars gone)! The mods you just listed are exactly what I have, minus the cobra intake!

Click to expand...

Not trying to wander OT, but I'm curious. What do you think my car (weighing 2800-2900 lbs) could run with the mods in my sig? With 3.55s and street tires. I would imagine it's going to be fast as soon as I get her running.

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Nov 30, 2004

#11

• Nov 30, 2004

• #11

Id say mid to low 13s with that low of a weight!