• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

28 Spline Vs 31 Spline

  • Thread starter Thread starter mind84
  • Start date Start date Dec 26, 2013
Prev
  • 1
  • 2
First Prev 2 of 2

f8tlfiveo

My wife likes my spool and blow-off valve.
Aug 8, 2007
1,585
102
64
Lancaster, PA
Dec 27, 2013
#21
  • Dec 27, 2013
  • #21
I broke a stock axle on 260 rwhp with nitto drag radials on a 4 k launch with a well prepped track. Not really a launch though. The car didn't move, snapped the axle off in the carrier and twisted the splines. Pain in the ass to get out. Had to pull the other axle and diff to get the stub out. Upgrade now, don't wait.
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Dec 27, 2013
#22
  • Dec 27, 2013
  • #22
mikestang63 said:
As far as I know, you can use the differential but the axles won't work fom Ford trucks except the Ranger. I think the 03-04's Cobra had 31 spline trak lock's. Here's a chart for reference. pages 51-52

http://www.differentials.com/Catalog_2012/index.html

Bottom line is you can swap the carrier and then buy new axles.
Click to expand...

01 cobra
03/04 cobra (carbon clutch)
05+ GT's (carbon clutch)
07+ GT500's
the 97+ F150's (might be older ones also)

thats just off the top of my head
 

cleanLX

Founding Member
Jan 17, 2001
976
537
144
Dec 27, 2013
#23
  • Dec 27, 2013
  • #23
The reason people break the stock axles at near stock hp levels is because they set the car up to dead hook (with an associated bog) and something has to give.
If you are going to the track on sticky tires and afraid to launch at high rpm to induce some tire spin, then get 31splines.
If on the other hand you are willing to launch hard enough with a higher psi on those same sticky tires and work your way backwards thru the day to an optimal launch rpm and tire pressure hook/spin deal than the 28's will do you well.
I likely had over 300 passes on the stock 28splines launching between 5000-6250rpm with between 9.5-15psi in the tires. The wide spread in rpm and psi is due to track conditions. Once the car was dialed in the rears would roll over a couple feet than scratch hard for about 10-15 feet then hook... 1.69's-1.70's with 232hp in a 3200lb car.

If you are unwilling to put the time into seat time, learning to read the track and learning to read your car, then by all means overbuild to avoid the likely hood of track breakage.

I will not be dedicating that kind of commitment to my new combo, so I went with 31's and a Detroit.
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Dec 27, 2013
#24
  • Dec 27, 2013
  • #24
Mine came from a 5.0 explorer. Not sure if the V6's have them or not.

Joe
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Dec 27, 2013
#25
  • Dec 27, 2013
  • #25
cleanLX said:
The reason people break the stock axles at near stock hp levels is because they set the car up to dead hook (with an associated bog) and something has to give.
If you are going to the track on sticky tires and afraid to launch at high rpm to induce some tire spin, then get 31splines.
If on the other hand you are willing to launch hard enough with a higher psi on those same sticky tires and work your way backwards thru the day to an optimal launch rpm and tire pressure hook/spin deal than the 28's will do you well.
I likely had over 300 passes on the stock 28splines launching between 5000-6250rpm with between 9.5-15psi in the tires. The wide spread in rpm and psi is due to track conditions. Once the car was dialed in the rears would roll over a couple feet than scratch hard for about 10-15 feet then hook... 1.69's-1.70's with 232hp in a 3200lb car.

If you are unwilling to put the time into seat time, learning to read the track and learning to read your car, then by all means overbuild to avoid the likely hood of track breakage.

I will not be dedicating that kind of commitment to my new combo, so I went with 31's and a Detroit.
Click to expand...

This is very true. 5500-6250 and your bound to spin over a dead hook and possible broken parts.

My 140k mile stockers last many mid 12s with 1.69-1.71 60's and never broke. The Ranger axle broke on pass #4 with Hoosiers. I equated it to the fact that one ranger axle spun one direction for many miles and I installed it going the other way. Fatigue of reversing the torque applied to it (if that makes sense to anyone).

FYI I think I paid $40 for my 31 spline carrier and either $100 or $150 for 31 spline fox length 5 lug axles.

All in all it's a crap shoot. You may or may not break an axle. Same with a T5, hit or miss.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,649
214
Acworth, GA
Dec 27, 2013
#26
  • Dec 27, 2013
  • #26
Messing up the launch is usually the best way to break an axle. Every one messes one up every once in awhile though. I've messed up a few in my time.

Kurt
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Dec 27, 2013
#27
  • Dec 27, 2013
  • #27
I feel like these arguments are kind of like the stock block arguments. You can try to explain away why some live longer than others, but at the end of the day you're asking a component to go far above and beyond what the engineers ever intended it to, and some of them are just plain gonna break.
 
Reactions: f8tlfiveo
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

O
Progress Thread LTD-ing
  • OX1
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
532
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 6, 2026
OX1
O
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
1K
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
996
1996 - 2004 SN95 Mustang -General/Talk- Monday at 10:08 AM
squeak93
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
512
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?