2V GUYS !?!

[1low03gt]

Was wondering what everyone's dyno #'s,and quarter mile times are,and mods used to get these times and dyno #'s.
I have a drop in K&N,mac h pipe with cats,flowmaster 40 series mufflers,3.73 gears,and a SCT chip for timing,dyno'd at 249 hp,and 292 ft lbs of torque,and pulled the best of 2.01 60ft and ran a 13.7 at 103 mph in the quarter mile.Times run on stock goodyears,and eibach sportline springs,which give no weight tranfer what so ever !
Reason i'm asking is that i want to see how comparable the 2V are.

 

[Mustang5L5]

14.2 @ 97MPH
2.1 60-footer

100% Bone stock.

Now i have a drop-in K&N, yanked silencer and installing a cat-back flowmaster setup next weekend. I also have a shifter (no more missing 3rd).

I'll hit the track in a week to see how i improved

 

[TacBear]

Was wondering what everyone's dyno #'s,and quarter mile times are,and mods used to get these times and dyno #'s.
I have a drop in K&N,mac h pipe with cats,flowmaster 40 series mufflers,3.73 gears,and a SCT chip for timing,dyno'd at 249 hp,and 292 ft lbs of torque,and pulled the best of 2.01 60ft and ran a 13.7 at 103 mph in the quarter mile.Times run on stock goodyears,and eibach sportline springs,which give no weight tranfer what so ever !
Reason i'm asking is that i want to see how comparable the 2V are.

In sig.

 

[ToplessStang]

Never put it on the dyno but see my sign. for times.

 

[JonJon]

13.706 @ 100.25 with 1.919 60' with just a C&L MAF.

Lots of mods now but haven't gotten a good run yet.

 

[Wayne S]

13.706 @ 100.25 with 1.919 60' with just a C&L MAF.

Lots of mods now but haven't gotten a good run yet.

Yah shouLd of went to the track today. Today was the best N.E.D has ever hooked. Peter champani was there with his DR car on brand new M/T Drs them tires hook Like a mofo. He put the car on the back bumper hung all 4 wheels Manny had his outLaw car out to he ran 7.9s and a 7.6

I got a few 1.8 60fts in today as well.

 

[prochargedstang]

p1sc intercooled, lightning mam, 42lb injectors, 255l fuel pump, triax shifter, line lock, mt et streets.

r/t .193
60' 1.766
330 5.162
1/8 7.99
mph 87.71
1000 10.404
1/4 12.449
mph 110.68

 

[GTMomma02]

The time in my sig is with drag radials. If I can get the hang of the BFG's I think I can swing a 13.3. My best on the street tires was a 13.55. I dynoed at 229 rwhp after gears, which imo seems a little low. According to modular depot's ET/hp calculator I have about 239 rwhp.

 

[stang976]

p1sc intercooled, lightning mam, 42lb injectors, 255l fuel pump, triax shifter, line lock, mt et streets.

r/t .193
60' 1.766
1/4 12.449
mph 110.68

jeez.. and i was hoping for 11's after the vortech install

 

[prochargedstang]

i think i need a tune. friend of mine made 415 with a vortech and intercooler. i am somewhere between 375-400

 

[mrpositraction]

Best time on the side. This was bone stock minus a K&N filter, I can't wait to see what is next, all other times are in profile under time slips