3.73 vs. 3.55

4.10 FTW!

final5-0 said:

Here is a thought for those who can't decide

Run a tire 27 inches tall and 373's

You'll be just about at a ratio of 3.64

Grady

Click to expand...

How right you are my friend.. I run 3.73 and a 26.6 on the street and almost a 28 at the strip. Gears are you friend..

Yeah.....I'm putting down freakin 300 to the tire and I have 2:73's...it SUCKS

from a 15-25 roll in first if you pin it, the tires just go up in smoke, and it'll get a little bit of 2nd (maybe like 5 ft) and BARELY bark 3rd. Thats with 285s and alot of suspension.

My 3:73s outta wake it up just a bit It sucks shifting OUT of your powerband with 2:73s

http://www.allfordmustangs.com/Detailed/608.shtml

Reference with T5 transmission/stock tire size/16in. wheel, in 5th gear cruising rpm at 70mph (Interstate Speed):

2.73:1 - 1696 RPM
3.08:1 - 1914 RPM
3.27:1 - 2032 RPM
3.55:1 - 2206 RPM
3.73:1 - 2318 RPM
3.90:1 - 2423 RPM
4.10:1 - 2548 RPM
4.30:1 - 2672 RPM
4.56:1 - 2834 RPM

This is very general answer but its seems to be like this...

N/A = 3.73s

Supercharger or Nitrous = 3.55s

Turbo(s) = 3.27s

Now this it just what "most" people are doing, it doenst mean its the best for you or everyone but seems to be what most people do.

Also check out this...

http://www.allfordmustangs.com/Detailed/608.shtml

and

http://www.allfordmustangs.com/Detailed/641.shtml

UpRise_5.0 said:

Also check out this...

http://www.allfordmustangs.com/Detailed/608.shtml

Click to expand...

LOL - or scroll up to the post directly above yours for the exact same link.

"Need to know your goals for down the road."

Why am I laughing? At me mainly.

FIRST, I did not want to rev too high on the bway but HATED 2.73's and 1st gear so annoying under 30mph constantly pushing in the clutch or bucking and no power. Sooo without much experience, I changed to --> 3.55's.

I liked them but after learning from grady about how H/C/I 302's move UP the power band and run FASTER with higher number gears and good traction AND wanting to have a car that I can say runs 12's...I went 3.90's! They were AWESOME! I would have had to beef up the suspension more to take advantage of 1st gear though and then it would have really flown but I didn't and changed my goals...again, lol.

I wanted to rev LOWER on the b-way and I still wanted more low end without running out of gear too fast...sooo--> I CHANGED MY GOALS AGAIN and went to a 408 then 414c.i. and figuring I would really burn off my tires in 1st and rev too high unnecessarily on b-way. I also wanted a gear that would put the power to the pavement without spinning as much for streeting (different goals than a Qmiler) With that in mind, I went 3.27's!

Now as I am breaking in my engine, I like the fact that the 3.27's rev lower and quiet on the b-way but I liked the 3.90's better on the low end simply because I didn't have to push the clutch in so much at lower speeds.... So ..if I had a perfect gear right now it would be .. _______________. Iam not sure.. :Zip2:

I bought my 95 gt 5spd about 1 year ago with quite a few mods that I didn't know about 4:10 gears was one of them I hate them for daily driving! always shifting, 3000 rpm @ 75 mph. Looking to bring mine down to 3:55 or 3:73's also speedo gear for 4:10 is white 23 tooth from automatic trans and wears out after about 20,000 miles I don't recomend it for daily driving but thats just me

I'm curious about which set to get as well. I've got a 94, and someone before mentions it feels like pulling a ski-doo. These things really come stock with 2.73's? All I know is it's so damned tall.

Any recommedations on which brand? I've been eyeing the Ford Racing set.

Wasatch 5.0 said:

I'm curious about which set to get as well. I've got a 94, and someone before mentions it feels like pulling a ski-doo. These things really come stock with 2.73's? All I know is it's so damned tall.

Any recommedations on which brand? I've been eyeing the Ford Racing set.

Click to expand...

Mine came stock w 3:27's but then it's an auto. First changed to 4:10's then managed to chip the pinion gear. Had an internal differential alignment problem and swapped in a FRPP complete differential assembly with 3:73 gears.

Wasatch 5.0 said:

I'm curious about which set to get as well. I've got a 94, and someone before mentions it feels like pulling a ski-doo. These things really come stock with 2.73's? All I know is it's so damned tall.

Any recommedations on which brand? I've been eyeing the Ford Racing set.

Click to expand...

Ford racing is one of the best to get. I recommend going with 3.73's I just went from 2.73's to 3.73's and I love it. I went from running a 15.1 to a 14.7. I ran 15.1 and ran 4 passes got better each pass. I only made 1 pass for the 14.7 and I spun it all through first.