• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

3.8L

  • Thread starter Thread starter Shano2001
  • Start date Start date Mar 22, 2008
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last
S

Shano2001

New Member
Mar 19, 2008
17
0
0
Mar 22, 2008
#1
  • Mar 22, 2008
  • #1
3.8L Mods?

Hey i recently got a 1994 3.8l mustang but find there just isnt enugh umpf to it... SO i was looking into maybe getting a CAI (MAC) , a chip and maybe put some nos into her... I dont have to much to spend or id be rebuilding the engine so im basicly looking for some cheap HP. My question is, can i run a chip and nos together and also how much boost can i run of nos on a stock 3.8? Also where can ya get a decent chip and a T-lock ?

Cheers,
Shane
 

Black_02_GT

Member
Mar 2, 2008
0
0
16
Mississippi
Mar 22, 2008
#2
  • Mar 22, 2008
  • #2
3.8 forums are dead man, you'll be lucky if you get a response for the next week.
 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!
Founding Member
Nov 29, 1999
5,520
1,291
224
H Town
Mar 22, 2008
#3
  • Mar 22, 2008
  • #3
Hey i recently got a 1994 3.8l mustang but find there just isnt enugh umpf to it... SO i was looking into maybe getting a CAI (MAC) , a chip and maybe put some nos into her... I dont have to much to spend or id be rebuilding the engine so im basicly looking for some cheap HP. My question is, can i run a chip and nos together and also how much boost can i run of nos on a stock 3.8? Also where can ya get a decent chip and a T-lock ?

Cheers,
Shane
Click to expand...




 

ChingonStang

Member
Sep 19, 2004
308
0
16
Dallas, Tejas
Mar 22, 2008
#4
  • Mar 22, 2008
  • #4
Black_02_GT said:
3.8 forums are dead man, you'll be lucky if you get a response for the next week.
Click to expand...

It's not dead, its just that his type of question has been answered hundreds of times in other threads. New members don't usually utilize the search function.
 
S

Shano2001

New Member
Mar 19, 2008
17
0
0
Mar 23, 2008
#5
  • Mar 23, 2008
  • #5
[
 

94GTHO

Member
Jul 21, 2005
200
0
17
Richmond, Va
Mar 23, 2008
#6
  • Mar 23, 2008
  • #6
Wrong section.
 

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Mar 23, 2008
#7
  • Mar 23, 2008
  • #7
You might try the 3.8 forum, this is the 4.6 forum, hence the smart ass reply.

Honestly, I wouldn't mess with modifying the 3.8. This coming from a guy with a modded 4cyl mustang! If your going to use it as a daily driver, then use it for that and get used to it being underpowered. Any gains you make from mods will be small.

Shano2001 said:
Is there any real reason to your reply other than to be a complete knob and bash someone who is trying to get involved with the sport and learn more about it? Way to be a complete A**hole, Two thumbs up! Your the type of person that ruins the sport for new ppl because you think your king S*it. get a life moron!
Click to expand...
 
S

Shano2001

New Member
Mar 19, 2008
17
0
0
Mar 23, 2008
#8
  • Mar 23, 2008
  • #8
Tried the 3.8L section and was told was dead and to try here so thats what im doing As of the car its just a mustang to drive untill i get the other mustang i want(4.6L gt) built the way i want.

Thanks,
Shane
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Mar 23, 2008
#9
  • Mar 23, 2008
  • #9
DONT BOTHER WASTING YOUR TIME AND MONEY ON ANY MODS FOR A V6!!!! you will never be able to run with even a mildly modded GT. dont be the guy who thinks his V6 is fast!
 

kaostik

New Member
Apr 13, 2006
10
0
0
Everett, Ma
Mar 23, 2008
#10
  • Mar 23, 2008
  • #10
how many miles on the car? the 3.8ls of 94 and 95, maybe even through 98 suffer blown head gaskets at around 130,000 miles, just an fyi.

my first car was a 95 six banger. nothing you can do to make it fast unless you spend wayyyyy too much money for even moderate gains. great for gas mileage, not for racing.

i had it for nearly 4 years until it died at about 132k with the notorious blown headgasket. it would have cost more to fix it that the car was worth. the day it died i traded it in and got a gorgeous black GT. thats the best mod you can do for a v6.
 

DBMSTNG

I fantasize about it being BIG!
Founding Member
Apr 23, 2002
2,120
0
56
not quite here
Mar 23, 2008
#11
  • Mar 23, 2008
  • #11
get a 99+ V6 and put a twin turbo kit on it. you'll smoke all of the N/A GT's.
 

Black_02_GT

Member
Mar 2, 2008
0
0
16
Mississippi
Mar 23, 2008
#12
  • Mar 23, 2008
  • #12
not to knock anyone but when i see people talk about putting twin turbos on a v6 it just makes me laugh everytime. Get a GT and TT it and then we've actually got sometime worth dealing with. Keep the sixers as the DD and get a nice GT. end of story.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Mar 23, 2008
#13
  • Mar 23, 2008
  • #13
Shano2001 said:
Is there any real reason to your reply other than to be a complete knob and bash someone who is trying to get involved with the sport and learn more about it? Way to be a complete A**hole, Two thumbs up! Your the type of person that ruins the sport for new ppl because you think your king S*it. get a life moron!
Click to expand...

If it wasn't Easter, I'd ban you for this childish outburst. How about you re-read the StangNet Terms of Service that you JUST read and agreed to 4 days ago when you registered? Pay particular attention to the section regarding personal attacks...

To everyone else, don't answer if you don't have something helpful to say. It may not occur to everyone here, but maybe the OP couldn't afford a GT or Cobra, but they'd like a little more performance out of their 3.8L?
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Mar 23, 2008
#14
  • Mar 23, 2008
  • #14
StangGT1995 said:
To everyone else, don't answer if you don't have something helpful to say. It may not occur to everyone here, but maybe the OP couldn't afford a GT or Cobra, but they'd like a little more performance out of their 3.8L?
Click to expand...

It is the wrong section, but still a good point.

With that said, I dont know too much about the 3.8 but I'd say with some gears and say a 75 shot of the juice and that may just give you what you're looking for. Not too sure how much power a 3.8 can take though. I really wouldnt suggest putting too much money in it though, because in the end you'll just have to swap the entire driveline just to get to where most of us started in the first place.

A buddy of mine has a 2006 V6 Mustang with a supercharger on it...that thing gives me a run for my money especially on the highway. But in the end, he'll be stuck and thats about as far as he will get without tearing the motor apart.
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Mar 23, 2008
#15
  • Mar 23, 2008
  • #15
3.8's arent a lost cause, dont you guys remember the Super Coupe Thunderbirds?

They arent light cars by any means and the best years were running comparable 1/4 mile times to most non-PI GT's.


You CAN go bargain hunting (E-bay, Junkyards) and nab a supercharger setup off one of those cars, and peice the rest of the odds and ends together.

Or, you can hit it with some nitrous. DO NOT USE A COMPUTER CHIP WITH THE NITROUS. Chips advance timing and that is bad, bad news when spraying a motor.

To tune it you need a handheld or custom tuner to either NOT adjust the timing or to retard the timing.

NX sells a cheap basic wet nitrous kit. Its called the Mainline. Its $400 and you can spend a little more on saftey acessories to make sure you are taking proper precautions.

I wouldnt spray more than a 75 shot, 100 at the most.

I watched my buddies 3.8 blow the head gaskets going down the highway... it was nasty, so I do not reccomend pushing these engines hard.

99+ is when the problem was revised for the head gaskets.
 
B

Black_GT_02

New Member
Mar 23, 2008
1
0
0
Ohio
Mar 23, 2008
#16
  • Mar 23, 2008
  • #16
Your best bets would be gears, underdrive pullies, and exhaust.

3.73 gears if you have a manual and 4.10's if you have an auto.

good luck!
 
B

Black_GT_02

New Member
Mar 23, 2008
1
0
0
Ohio
Mar 23, 2008
#17
  • Mar 23, 2008
  • #17
Also, I just joined this forum today and compared to other forums, i'm not getting a good impression with the constant slams on him because he has a v6. Seriously guys.
 

Superhereaux

chicks make me feel inadequate
Founding Member
Jul 30, 2002
538
3
59
South Texas
Mar 23, 2008
#18
  • Mar 23, 2008
  • #18
if the OP ever posts here again (doubt it) i'd suggest a Stage 0 upgrade, and this advice will work for anyone with a 10yr+ old Mustang, GT or otherwise


spend the money on a COMPLETE tune up. a 14yr old car can't be in the greatest shape. replace EVERY filter, fluid, belt, plug, etc. on the car and then focus on upgrading/replacing the old, worn suspension. new springs, shocks/struts, bushings all around, new swaybars and a nice set of 17's with new tires

then buy a bucketload of detailing products and go to work


after you spend the cash on all that the last thing you'll want to do is worry about "performance" parts like a crappy mac intake and an ebay chip.

3.73's and a T-lok isn't a bad idea though and will give you the little extra umph you're looking for.
 
S

Shano2001

New Member
Mar 19, 2008
17
0
0
Mar 23, 2008
#19
  • Mar 23, 2008
  • #19
StangGT1995 said:
If it wasn't Easter, I'd ban you for this childish outburst. How about you re-read the StangNet Terms of Service that you JUST read and agreed to 4 days ago when you registered? Pay particular attention to the section regarding personal attacks...

To everyone else, don't answer if you don't have something helpful to say. It may not occur to everyone here, but maybe the OP couldn't afford a GT or Cobra, but they'd like a little more performance out of their 3.8L?
Click to expand...

I have to apoligize for this yes it was very childish! I am sorry for the personal attack no excuse ! and i do have a 98 gt and also an other on for parts but i need a car to drive untill it is fixed. I just pulled a head off the 3.8l today and the head is pitted! so i gotta fina a new one or weld it and cut it back down. Also i have a dual exaus im going to put on and was looking at the 94 supercharger off the thunderbid and thinking im going to put tha on also. For the rest im going to put a CAI(mac), shift kit, chip(not sure what one any ideas?) new rear end with 3.73 gears(out of a 98 gt) also got some new rims and rubber from the 98 gt! and to finnish her off ill throw some fresh paint on her.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Mar 23, 2008
#20
  • Mar 23, 2008
  • #20
Shano2001 said:
Tried the 3.8L section and was told was dead and to try here so thats what im doing As of the car its just a mustang to drive untill i get the other mustang i want(4.6L gt) built the way i want.

Thanks,
Shane
Click to expand...

This thread has been moved to V6 Talk and merged with your previous thread.

Next time, wait more than half an hour before you go reinventing the thread in another section. Patience is a virtue my friend. The first thing you need to do before posting is search and read through the archives and see that this question or a variation of it has been hashed and rehashed several times in the past.

And don't get too worked up when members start busting balls. They're just screwing with the new guy.
 
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last
You must log in or register to reply here.

Similar threads

N
New Edge 3.8L Forged Internals
  • NtheGAME
  • Jun 1, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
804
SN95 V6 Mustang Tech Jun 3, 2025
Noobz347
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
357
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
167
SN95 4.6L Mustang Tech Aug 4, 2026
jake411
J
B
Screamin Demons Worth It N/A?
  • Blackout67
  • Oct 20, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
301
1996 - 2004 SN95 Mustang -General/Talk- Oct 20, 2025
Noobz347
T
Hi
  • timotto
  • Dec 14, 2025
  • The Welcome Wagon
Replies
2
Views
156
The Welcome Wagon Dec 14, 2025
91AOD5.0LX
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?