3 bolt crank pulley and a 4 bolt damper?? help

biggyfan1

Member

Mar 10, 2006

186

1

18

High Desert CA

Apr 11, 2006

#1

• Apr 11, 2006

• #1

hey guys i just noticed that my crank pulley is a 3 bolt and my balancer is a 4 bolt (1987-1993) style. i have the late model 302 now 347 in the 1966 thats why i am having this problem. should i buy a new pulley to match the balancer? and if so who has them? or should i buy a new balancer? and if so who has them also? im running the 1966 timing cover with the 66 pulleys, and didnt even realize the later model balancer was a 4 bolt i just want everything to line up thanks

 

5

5.0ina66

Member

Jun 6, 2003

664

0

16

Ohio

Apr 11, 2006

#2

• Apr 11, 2006

• #2

It's easiest to get a new balancer. Summit has them for $70 http://store.summitracing.com/partd...4294925008+400304+4294871851+115&autoview=sku

 

M

mikemustang289

Member

Jan 12, 2006

224

0

16

mesa, az

Apr 11, 2006

#3

• Apr 11, 2006

• #3

March has the pully but it's about 100 bucks

 

biggyfan1

Member

Mar 10, 2006

186

1

18

High Desert CA

Apr 11, 2006

#4

• Apr 11, 2006

• #4

thanks 5.0ina66 i was looking at that one too but didnt know if it was the right one. thanks alot

 

D

D.Hearne

New Member

Sep 29, 2000

11,730

6

0

south louisiana

Apr 12, 2006

#5

• Apr 12, 2006

• #5

If the pulley uses the same offset balancer, just drill the pulley with the correct bolt pattern.

 

B

Baw289

Member

Nov 7, 2004

34

0

6

Apr 12, 2006

#6

• Apr 12, 2006

• #6

Sounds like a good time to put in a serpentine set up. You can probably get everything for under $100, thats what I would do with that engine.